# Makefile for access/transam
#
# IDENTIFICATION
-# $Header: /cvsroot/pgsql/src/backend/access/transam/Makefile,v 1.16 2003/05/12 23:08:50 tgl Exp $
+# $Header: /cvsroot/pgsql/src/backend/access/transam/Makefile,v 1.17 2003/06/11 22:37:45 momjian Exp $
#
#-------------------------------------------------------------------------
top_builddir = ../../../..
include $(top_builddir)/src/Makefile.global
-OBJS = clog.o transam.o varsup.o xact.o xlog.o xlogutils.o rmgr.o
+OBJS = clog.o transam.o varsup.o xact.o xlog.o xlogutils.o rmgr.o slru.o
all: SUBSYS.o
* Portions Copyright (c) 1996-2002, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
- * $Header: /cvsroot/pgsql/src/backend/access/transam/clog.c,v 1.15 2003/05/03 03:52:07 momjian Exp $
+ * $Header: /cvsroot/pgsql/src/backend/access/transam/clog.c,v 1.16 2003/06/11 22:37:45 momjian Exp $
*
*-------------------------------------------------------------------------
*/
#include <unistd.h>
#include "access/clog.h"
+#include "access/slru.h"
#include "storage/lwlock.h"
#include "miscadmin.h"
/*
* Defines for CLOG page and segment sizes. A page is the same BLCKSZ
- * as is used everywhere else in Postgres. The CLOG segment size can be
- * chosen somewhat arbitrarily; we make it 1 million transactions by default,
- * or 256Kb.
+ * as is used everywhere else in Postgres.
*
* Note: because TransactionIds are 32 bits and wrap around at 0xFFFFFFFF,
* CLOG page numbering also wraps around at 0xFFFFFFFF/CLOG_XACTS_PER_PAGE,
* segment and page numbers in TruncateCLOG (see CLOGPagePrecedes).
*/
-#define CLOG_BLCKSZ BLCKSZ
-
/* We need two bits per xact, so four xacts fit in a byte */
#define CLOG_BITS_PER_XACT 2
#define CLOG_XACTS_PER_BYTE 4
-#define CLOG_XACTS_PER_PAGE (CLOG_BLCKSZ * CLOG_XACTS_PER_BYTE)
+#define CLOG_XACTS_PER_PAGE (BLCKSZ * CLOG_XACTS_PER_BYTE)
#define CLOG_XACT_BITMASK ((1 << CLOG_BITS_PER_XACT) - 1)
-#define CLOG_XACTS_PER_SEGMENT 0x100000
-#define CLOG_PAGES_PER_SEGMENT (CLOG_XACTS_PER_SEGMENT / CLOG_XACTS_PER_PAGE)
-
#define TransactionIdToPage(xid) ((xid) / (TransactionId) CLOG_XACTS_PER_PAGE)
#define TransactionIdToPgIndex(xid) ((xid) % (TransactionId) CLOG_XACTS_PER_PAGE)
#define TransactionIdToByte(xid) (TransactionIdToPgIndex(xid) / CLOG_XACTS_PER_BYTE)
/*----------
* Shared-memory data structures for CLOG control
*
- * We use a simple least-recently-used scheme to manage a pool of page
- * buffers for the CLOG. Under ordinary circumstances we expect that write
- * traffic will occur mostly to the latest CLOG page (and to the just-prior
- * page, soon after a page transition). Read traffic will probably touch
- * a larger span of pages, but in any case a fairly small number of page
- * buffers should be sufficient. So, we just search the buffers using plain
- * linear search; there's no need for a hashtable or anything fancy.
- * The management algorithm is straight LRU except that we will never swap
- * out the latest page (since we know it's going to be hit again eventually).
- *
- * We use an overall LWLock to protect the shared data structures, plus
- * per-buffer LWLocks that synchronize I/O for each buffer. A process
- * that is reading in or writing out a page buffer does not hold the control
- * lock, only the per-buffer lock for the buffer it is working on.
- *
- * To change the page number or state of a buffer, one must normally hold
- * the control lock. (The sole exception to this rule is that a writer
- * process changes the state from DIRTY to WRITE_IN_PROGRESS while holding
- * only the per-buffer lock.) If the buffer's state is neither EMPTY nor
- * CLEAN, then there may be processes doing (or waiting to do) I/O on the
- * buffer, so the page number may not be changed, and the only allowed state
- * transition is to change WRITE_IN_PROGRESS to DIRTY after dirtying the page.
- * To do any other state transition involving a buffer with potential I/O
- * processes, one must hold both the per-buffer lock and the control lock.
- * (Note the control lock must be acquired second; do not wait on a buffer
- * lock while holding the control lock.) A process wishing to read a page
- * marks the buffer state as READ_IN_PROGRESS, then drops the control lock,
- * acquires the per-buffer lock, and rechecks the state before proceeding.
- * This recheck takes care of the possibility that someone else already did
- * the read, while the early marking prevents someone else from trying to
- * read the same page into a different buffer.
- *
- * Note we are assuming that read and write of the state value is atomic,
- * since I/O processes may examine and change the state while not holding
- * the control lock.
- *
- * As with the regular buffer manager, it is possible for another process
- * to re-dirty a page that is currently being written out. This is handled
- * by setting the page's state from WRITE_IN_PROGRESS to DIRTY. The writing
- * process must notice this and not mark the page CLEAN when it's done.
- *
* XLOG interactions: this module generates an XLOG record whenever a new
* CLOG page is initialized to zeroes. Other writes of CLOG come from
* recording of transaction commit or abort in xact.c, which generates its
*----------
*/
-typedef enum
-{
- CLOG_PAGE_EMPTY, /* CLOG buffer is not in use */
- CLOG_PAGE_READ_IN_PROGRESS, /* CLOG page is being read in */
- CLOG_PAGE_CLEAN, /* CLOG page is valid and not dirty */
- CLOG_PAGE_DIRTY, /* CLOG page is valid but needs write */
- CLOG_PAGE_WRITE_IN_PROGRESS /* CLOG page is being written out */
-} ClogPageStatus;
-
-/*
- * Shared-memory state for CLOG.
- */
-typedef struct ClogCtlData
-{
- /*
- * Info for each buffer slot. Page number is undefined when status is
- * EMPTY. lru_count is essentially the number of operations since
- * last use of this page; the page with highest lru_count is the best
- * candidate to replace.
- */
- char *page_buffer[NUM_CLOG_BUFFERS];
- ClogPageStatus page_status[NUM_CLOG_BUFFERS];
- int page_number[NUM_CLOG_BUFFERS];
- unsigned int page_lru_count[NUM_CLOG_BUFFERS];
-
- /*
- * latest_page_number is the page number of the current end of the
- * CLOG; this is not critical data, since we use it only to avoid
- * swapping out the latest page.
- */
- int latest_page_number;
-} ClogCtlData;
-
-static ClogCtlData *ClogCtl = NULL;
-
-/*
- * ClogBufferLocks is set during CLOGShmemInit and does not change thereafter.
- * The value is automatically inherited by backends via fork, and
- * doesn't need to be in shared memory.
- */
-static LWLockId *ClogBufferLocks; /* Per-buffer I/O locks */
-
-/*
- * ClogDir is set during CLOGShmemInit and does not change thereafter.
- * The value is automatically inherited by backends via fork, and
- * doesn't need to be in shared memory.
- */
-static char ClogDir[MAXPGPATH];
-
-#define ClogFileName(path, seg) \
- snprintf(path, MAXPGPATH, "%s/%04X", ClogDir, seg)
-
-/*
- * Macro to mark a buffer slot "most recently used".
- */
-#define ClogRecentlyUsed(slotno) \
- do { \
- int iilru; \
- for (iilru = 0; iilru < NUM_CLOG_BUFFERS; iilru++) \
- ClogCtl->page_lru_count[iilru]++; \
- ClogCtl->page_lru_count[slotno] = 0; \
- } while (0)
-
-/* Saved info for CLOGReportIOError */
-typedef enum
-{
- CLOG_OPEN_FAILED,
- CLOG_CREATE_FAILED,
- CLOG_SEEK_FAILED,
- CLOG_READ_FAILED,
- CLOG_WRITE_FAILED
-} ClogErrorCause;
-static ClogErrorCause clog_errcause;
-static int clog_errno;
+static SlruCtlData ClogCtlData;
+static SlruCtl ClogCtl = &ClogCtlData;
+
static int ZeroCLOGPage(int pageno, bool writeXlog);
-static int ReadCLOGPage(int pageno, TransactionId xid);
-static void WriteCLOGPage(int slotno);
-static bool CLOGPhysicalReadPage(int pageno, int slotno);
-static bool CLOGPhysicalWritePage(int pageno, int slotno);
-static void CLOGReportIOError(int pageno, TransactionId xid);
-static int SelectLRUCLOGPage(int pageno);
-static bool ScanCLOGDirectory(int cutoffPage, bool doDeletions);
static bool CLOGPagePrecedes(int page1, int page2);
static void WriteZeroPageXlogRec(int pageno);
int pageno = TransactionIdToPage(xid);
int byteno = TransactionIdToByte(xid);
int bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT;
- int slotno;
char *byteptr;
Assert(status == TRANSACTION_STATUS_COMMITTED ||
status == TRANSACTION_STATUS_ABORTED);
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
+ LWLockAcquire(ClogCtl->locks->ControlLock, LW_EXCLUSIVE);
- slotno = ReadCLOGPage(pageno, xid);
- byteptr = ClogCtl->page_buffer[slotno] + byteno;
+ byteptr = SimpleLruReadPage(ClogCtl, pageno, xid, true);
+ byteptr += byteno;
/* Current state should be 0 or target state */
Assert(((*byteptr >> bshift) & CLOG_XACT_BITMASK) == 0 ||
*byteptr |= (status << bshift);
- ClogCtl->page_status[slotno] = CLOG_PAGE_DIRTY;
+ /* ...->page_status[slotno] = CLOG_PAGE_DIRTY; already done */
- LWLockRelease(CLogControlLock);
+ LWLockRelease(ClogCtl->locks->ControlLock);
}
/*
int pageno = TransactionIdToPage(xid);
int byteno = TransactionIdToByte(xid);
int bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT;
- int slotno;
char *byteptr;
XidStatus status;
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
+ LWLockAcquire(ClogCtl->locks->ControlLock, LW_EXCLUSIVE);
- slotno = ReadCLOGPage(pageno, xid);
- byteptr = ClogCtl->page_buffer[slotno] + byteno;
+ byteptr = SimpleLruReadPage(ClogCtl, pageno, xid, false);
+ byteptr += byteno;
status = (*byteptr >> bshift) & CLOG_XACT_BITMASK;
- LWLockRelease(CLogControlLock);
+ LWLockRelease(ClogCtl->locks->ControlLock);
return status;
}
/*
* Initialization of shared memory for CLOG
*/
+
int
CLOGShmemSize(void)
{
- return MAXALIGN(sizeof(ClogCtlData) + CLOG_BLCKSZ * NUM_CLOG_BUFFERS)
-#ifdef EXEC_BACKEND
- + MAXALIGN(NUM_CLOG_BUFFERS * sizeof(LWLockId))
-#endif
- ;
+ return SimpleLruShmemSize();
}
-
void
CLOGShmemInit(void)
{
- bool found;
- int slotno;
-
- /* Handle ClogCtl */
-
- /* this must agree with space requested by CLOGShmemSize() */
- ClogCtl = (ClogCtlData *) ShmemInitStruct("CLOG Ctl",
- MAXALIGN(sizeof(ClogCtlData) +
- CLOG_BLCKSZ * NUM_CLOG_BUFFERS), &found);
-
- if (!IsUnderPostmaster)
- /* Initialize ClogCtl shared memory area */
- {
- char *bufptr;
-
- Assert(!found);
-
- memset(ClogCtl, 0, sizeof(ClogCtlData));
-
- bufptr = (char *)ClogCtl + sizeof(ClogCtlData);
-
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- {
- ClogCtl->page_buffer[slotno] = bufptr;
- ClogCtl->page_status[slotno] = CLOG_PAGE_EMPTY;
- bufptr += CLOG_BLCKSZ;
- }
-
- /* ClogCtl->latest_page_number will be set later */
- }
- else
- Assert(found);
-
- /* Handle ClogBufferLocks */
-
-#ifdef EXEC_BACKEND
- ClogBufferLocks = (LWLockId *) ShmemInitStruct("CLOG Buffer Locks",
- NUM_CLOG_BUFFERS * sizeof(LWLockId), &found);
- Assert((!found && !IsUnderPostmaster) || (found && IsUnderPostmaster));
-#else
- ClogBufferLocks = malloc(NUM_CLOG_BUFFERS * sizeof(LWLockId));
- Assert(ClogBufferLocks);
-#endif
-
- if (!IsUnderPostmaster)
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- ClogBufferLocks[slotno] = LWLockAssign();
-
- /* Init CLOG directory path */
- snprintf(ClogDir, MAXPGPATH, "%s/pg_clog", DataDir);
+ SimpleLruInit(ClogCtl, "CLOG Ctl", "pg_clog");
+ ClogCtl->PagePrecedes = CLOGPagePrecedes;
}
/*
{
int slotno;
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
+ LWLockAcquire(ClogCtl->locks->ControlLock, LW_EXCLUSIVE);
/* Create and zero the first page of the commit log */
slotno = ZeroCLOGPage(0, false);
/* Make sure it's written out */
- WriteCLOGPage(slotno);
- Assert(ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN);
+ SimpleLruWritePage(ClogCtl, slotno);
+ /* Assert(ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN); */
- LWLockRelease(CLogControlLock);
+ LWLockRelease(ClogCtl->locks->ControlLock);
}
/*
static int
ZeroCLOGPage(int pageno, bool writeXlog)
{
- int slotno;
-
- /* Find a suitable buffer slot for the page */
- slotno = SelectLRUCLOGPage(pageno);
- Assert(ClogCtl->page_status[slotno] == CLOG_PAGE_EMPTY ||
- ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN ||
- ClogCtl->page_number[slotno] == pageno);
-
- /* Mark the slot as containing this page */
- ClogCtl->page_number[slotno] = pageno;
- ClogCtl->page_status[slotno] = CLOG_PAGE_DIRTY;
- ClogRecentlyUsed(slotno);
-
- /* Set the buffer to zeroes */
- MemSet(ClogCtl->page_buffer[slotno], 0, CLOG_BLCKSZ);
-
- /* Assume this page is now the latest active page */
- ClogCtl->latest_page_number = pageno;
+ int slotno = SimpleLruZeroPage(ClogCtl, pageno);
if (writeXlog)
WriteZeroPageXlogRec(pageno);
return slotno;
}
-/*
- * Find a CLOG page in a shared buffer, reading it in if necessary.
- * The page number must correspond to an already-initialized page.
- *
- * The passed-in xid is used only for error reporting, and may be
- * InvalidTransactionId if no specific xid is associated with the action.
- *
- * Return value is the shared-buffer slot number now holding the page.
- * The buffer's LRU access info is updated.
- *
- * Control lock must be held at entry, and will be held at exit.
- */
-static int
-ReadCLOGPage(int pageno, TransactionId xid)
-{
- /* Outer loop handles restart if we lose the buffer to someone else */
- for (;;)
- {
- int slotno;
- bool ok;
-
- /* See if page already is in memory; if not, pick victim slot */
- slotno = SelectLRUCLOGPage(pageno);
-
- /* Did we find the page in memory? */
- if (ClogCtl->page_number[slotno] == pageno &&
- ClogCtl->page_status[slotno] != CLOG_PAGE_EMPTY)
- {
- /* If page is still being read in, we cannot use it yet */
- if (ClogCtl->page_status[slotno] != CLOG_PAGE_READ_IN_PROGRESS)
- {
- /* otherwise, it's ready to use */
- ClogRecentlyUsed(slotno);
- return slotno;
- }
- }
- else
- {
- /* We found no match; assert we selected a freeable slot */
- Assert(ClogCtl->page_status[slotno] == CLOG_PAGE_EMPTY ||
- ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN);
- }
-
- /* Mark the slot read-busy (no-op if it already was) */
- ClogCtl->page_number[slotno] = pageno;
- ClogCtl->page_status[slotno] = CLOG_PAGE_READ_IN_PROGRESS;
-
- /*
- * Temporarily mark page as recently-used to discourage
- * SelectLRUCLOGPage from selecting it again for someone else.
- */
- ClogCtl->page_lru_count[slotno] = 0;
-
- /* Release shared lock, grab per-buffer lock instead */
- LWLockRelease(CLogControlLock);
- LWLockAcquire(ClogBufferLocks[slotno], LW_EXCLUSIVE);
-
- /*
- * Check to see if someone else already did the read, or took the
- * buffer away from us. If so, restart from the top.
- */
- if (ClogCtl->page_number[slotno] != pageno ||
- ClogCtl->page_status[slotno] != CLOG_PAGE_READ_IN_PROGRESS)
- {
- LWLockRelease(ClogBufferLocks[slotno]);
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
- continue;
- }
-
- /* Okay, do the read */
- ok = CLOGPhysicalReadPage(pageno, slotno);
-
- /* Re-acquire shared control lock and update page state */
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
-
- Assert(ClogCtl->page_number[slotno] == pageno &&
- ClogCtl->page_status[slotno] == CLOG_PAGE_READ_IN_PROGRESS);
-
- ClogCtl->page_status[slotno] = ok ? CLOG_PAGE_CLEAN : CLOG_PAGE_EMPTY;
-
- LWLockRelease(ClogBufferLocks[slotno]);
-
- /* Now it's okay to elog if we failed */
- if (!ok)
- CLOGReportIOError(pageno, xid);
-
- ClogRecentlyUsed(slotno);
- return slotno;
- }
-}
-
-/*
- * Write a CLOG page from a shared buffer, if necessary.
- * Does nothing if the specified slot is not dirty.
- *
- * NOTE: only one write attempt is made here. Hence, it is possible that
- * the page is still dirty at exit (if someone else re-dirtied it during
- * the write). However, we *do* attempt a fresh write even if the page
- * is already being written; this is for checkpoints.
- *
- * Control lock must be held at entry, and will be held at exit.
- */
-static void
-WriteCLOGPage(int slotno)
-{
- int pageno;
- bool ok;
-
- /* Do nothing if page does not need writing */
- if (ClogCtl->page_status[slotno] != CLOG_PAGE_DIRTY &&
- ClogCtl->page_status[slotno] != CLOG_PAGE_WRITE_IN_PROGRESS)
- return;
-
- pageno = ClogCtl->page_number[slotno];
-
- /* Release shared lock, grab per-buffer lock instead */
- LWLockRelease(CLogControlLock);
- LWLockAcquire(ClogBufferLocks[slotno], LW_EXCLUSIVE);
-
- /*
- * Check to see if someone else already did the write, or took the
- * buffer away from us. If so, do nothing. NOTE: we really should
- * never see WRITE_IN_PROGRESS here, since that state should only
- * occur while the writer is holding the buffer lock. But accept it
- * so that we have a recovery path if a writer aborts.
- */
- if (ClogCtl->page_number[slotno] != pageno ||
- (ClogCtl->page_status[slotno] != CLOG_PAGE_DIRTY &&
- ClogCtl->page_status[slotno] != CLOG_PAGE_WRITE_IN_PROGRESS))
- {
- LWLockRelease(ClogBufferLocks[slotno]);
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
- return;
- }
-
- /*
- * Mark the slot write-busy. After this point, a transaction status
- * update on this page will mark it dirty again. NB: we are assuming
- * that read/write of the page status field is atomic, since we change
- * the state while not holding control lock. However, we cannot set
- * this state any sooner, or we'd possibly fool a previous writer into
- * thinking he's successfully dumped the page when he hasn't.
- * (Scenario: other writer starts, page is redirtied, we come along
- * and set WRITE_IN_PROGRESS again, other writer completes and sets
- * CLEAN because redirty info has been lost, then we think it's clean
- * too.)
- */
- ClogCtl->page_status[slotno] = CLOG_PAGE_WRITE_IN_PROGRESS;
-
- /* Okay, do the write */
- ok = CLOGPhysicalWritePage(pageno, slotno);
-
- /* Re-acquire shared control lock and update page state */
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
-
- Assert(ClogCtl->page_number[slotno] == pageno &&
- (ClogCtl->page_status[slotno] == CLOG_PAGE_WRITE_IN_PROGRESS ||
- ClogCtl->page_status[slotno] == CLOG_PAGE_DIRTY));
-
- /* Cannot set CLEAN if someone re-dirtied page since write started */
- if (ClogCtl->page_status[slotno] == CLOG_PAGE_WRITE_IN_PROGRESS)
- ClogCtl->page_status[slotno] = ok ? CLOG_PAGE_CLEAN : CLOG_PAGE_DIRTY;
-
- LWLockRelease(ClogBufferLocks[slotno]);
-
- /* Now it's okay to elog if we failed */
- if (!ok)
- CLOGReportIOError(pageno, InvalidTransactionId);
-}
-
-/*
- * Physical read of a (previously existing) page into a buffer slot
- *
- * On failure, we cannot just elog(ERROR) since caller has put state in
- * shared memory that must be undone. So, we return FALSE and save enough
- * info in static variables to let CLOGReportIOError make the report.
- *
- * For now, assume it's not worth keeping a file pointer open across
- * read/write operations. We could cache one virtual file pointer ...
- */
-static bool
-CLOGPhysicalReadPage(int pageno, int slotno)
-{
- int segno = pageno / CLOG_PAGES_PER_SEGMENT;
- int rpageno = pageno % CLOG_PAGES_PER_SEGMENT;
- int offset = rpageno * CLOG_BLCKSZ;
- char path[MAXPGPATH];
- int fd;
-
- ClogFileName(path, segno);
-
- /*
- * In a crash-and-restart situation, it's possible for us to receive
- * commands to set the commit status of transactions whose bits are in
- * already-truncated segments of the commit log (see notes in
- * CLOGPhysicalWritePage). Hence, if we are InRecovery, allow the
- * case where the file doesn't exist, and return zeroes instead.
- */
- fd = BasicOpenFile(path, O_RDWR | PG_BINARY, S_IRUSR | S_IWUSR);
- if (fd < 0)
- {
- if (errno != ENOENT || !InRecovery)
- {
- clog_errcause = CLOG_OPEN_FAILED;
- clog_errno = errno;
- return false;
- }
-
- elog(LOG, "clog file %s doesn't exist, reading as zeroes", path);
- MemSet(ClogCtl->page_buffer[slotno], 0, CLOG_BLCKSZ);
- return true;
- }
-
- if (lseek(fd, (off_t) offset, SEEK_SET) < 0)
- {
- clog_errcause = CLOG_SEEK_FAILED;
- clog_errno = errno;
- return false;
- }
-
- errno = 0;
- if (read(fd, ClogCtl->page_buffer[slotno], CLOG_BLCKSZ) != CLOG_BLCKSZ)
- {
- clog_errcause = CLOG_READ_FAILED;
- clog_errno = errno;
- return false;
- }
-
- close(fd);
- return true;
-}
-
-/*
- * Physical write of a page from a buffer slot
- *
- * On failure, we cannot just elog(ERROR) since caller has put state in
- * shared memory that must be undone. So, we return FALSE and save enough
- * info in static variables to let CLOGReportIOError make the report.
- *
- * For now, assume it's not worth keeping a file pointer open across
- * read/write operations. We could cache one virtual file pointer ...
- */
-static bool
-CLOGPhysicalWritePage(int pageno, int slotno)
-{
- int segno = pageno / CLOG_PAGES_PER_SEGMENT;
- int rpageno = pageno % CLOG_PAGES_PER_SEGMENT;
- int offset = rpageno * CLOG_BLCKSZ;
- char path[MAXPGPATH];
- int fd;
-
- ClogFileName(path, segno);
-
- /*
- * If the file doesn't already exist, we should create it. It is
- * possible for this to need to happen when writing a page that's not
- * first in its segment; we assume the OS can cope with that. (Note:
- * it might seem that it'd be okay to create files only when
- * ZeroCLOGPage is called for the first page of a segment. However,
- * if after a crash and restart the REDO logic elects to replay the
- * log from a checkpoint before the latest one, then it's possible
- * that we will get commands to set transaction status of transactions
- * that have already been truncated from the commit log. Easiest way
- * to deal with that is to accept references to nonexistent files here
- * and in CLOGPhysicalReadPage.)
- */
- fd = BasicOpenFile(path, O_RDWR | PG_BINARY, S_IRUSR | S_IWUSR);
- if (fd < 0)
- {
- if (errno != ENOENT)
- {
- clog_errcause = CLOG_OPEN_FAILED;
- clog_errno = errno;
- return false;
- }
-
- fd = BasicOpenFile(path, O_RDWR | O_CREAT | O_EXCL | PG_BINARY,
- S_IRUSR | S_IWUSR);
- if (fd < 0)
- {
- clog_errcause = CLOG_CREATE_FAILED;
- clog_errno = errno;
- return false;
- }
- }
-
- if (lseek(fd, (off_t) offset, SEEK_SET) < 0)
- {
- clog_errcause = CLOG_SEEK_FAILED;
- clog_errno = errno;
- return false;
- }
-
- errno = 0;
- if (write(fd, ClogCtl->page_buffer[slotno], CLOG_BLCKSZ) != CLOG_BLCKSZ)
- {
- /* if write didn't set errno, assume problem is no disk space */
- if (errno == 0)
- errno = ENOSPC;
- clog_errcause = CLOG_WRITE_FAILED;
- clog_errno = errno;
- return false;
- }
-
- close(fd);
- return true;
-}
-
-/*
- * Issue the error message after failure of CLOGPhysicalReadPage or
- * CLOGPhysicalWritePage. Call this after cleaning up shared-memory state.
- */
-static void
-CLOGReportIOError(int pageno, TransactionId xid)
-{
- int segno = pageno / CLOG_PAGES_PER_SEGMENT;
- int rpageno = pageno % CLOG_PAGES_PER_SEGMENT;
- int offset = rpageno * CLOG_BLCKSZ;
- char path[MAXPGPATH];
-
- /* XXX TODO: provide xid as context in error messages */
-
- ClogFileName(path, segno);
- errno = clog_errno;
- switch (clog_errcause)
- {
- case CLOG_OPEN_FAILED:
- elog(ERROR, "open of %s failed: %m", path);
- break;
- case CLOG_CREATE_FAILED:
- elog(ERROR, "creation of file %s failed: %m", path);
- break;
- case CLOG_SEEK_FAILED:
- elog(ERROR, "lseek of clog file %u, offset %u failed: %m",
- segno, offset);
- break;
- case CLOG_READ_FAILED:
- elog(ERROR, "read of clog file %u, offset %u failed: %m",
- segno, offset);
- break;
- case CLOG_WRITE_FAILED:
- elog(ERROR, "write of clog file %u, offset %u failed: %m",
- segno, offset);
- break;
- default:
- /* can't get here, we trust */
- elog(ERROR, "unknown CLOG I/O error");
- break;
- }
-}
-
-/*
- * Select the slot to re-use when we need a free slot.
- *
- * The target page number is passed because we need to consider the
- * possibility that some other process reads in the target page while
- * we are doing I/O to free a slot. Hence, check or recheck to see if
- * any slot already holds the target page, and return that slot if so.
- * Thus, the returned slot is *either* a slot already holding the pageno
- * (could be any state except EMPTY), *or* a freeable slot (state EMPTY
- * or CLEAN).
- *
- * Control lock must be held at entry, and will be held at exit.
- */
-static int
-SelectLRUCLOGPage(int pageno)
-{
- /* Outer loop handles restart after I/O */
- for (;;)
- {
- int slotno;
- int bestslot = 0;
- unsigned int bestcount = 0;
-
- /* See if page already has a buffer assigned */
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- {
- if (ClogCtl->page_number[slotno] == pageno &&
- ClogCtl->page_status[slotno] != CLOG_PAGE_EMPTY)
- return slotno;
- }
-
- /*
- * If we find any EMPTY slot, just select that one. Else locate
- * the least-recently-used slot that isn't the latest CLOG page.
- */
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- {
- if (ClogCtl->page_status[slotno] == CLOG_PAGE_EMPTY)
- return slotno;
- if (ClogCtl->page_lru_count[slotno] > bestcount &&
- ClogCtl->page_number[slotno] != ClogCtl->latest_page_number)
- {
- bestslot = slotno;
- bestcount = ClogCtl->page_lru_count[slotno];
- }
- }
-
- /*
- * If the selected page is clean, we're set.
- */
- if (ClogCtl->page_status[bestslot] == CLOG_PAGE_CLEAN)
- return bestslot;
-
- /*
- * We need to do I/O. Normal case is that we have to write it
- * out, but it's possible in the worst case to have selected a
- * read-busy page. In that case we use ReadCLOGPage to wait for
- * the read to complete.
- */
- if (ClogCtl->page_status[bestslot] == CLOG_PAGE_READ_IN_PROGRESS)
- (void) ReadCLOGPage(ClogCtl->page_number[bestslot],
- InvalidTransactionId);
- else
- WriteCLOGPage(bestslot);
-
- /*
- * Now loop back and try again. This is the easiest way of
- * dealing with corner cases such as the victim page being
- * re-dirtied while we wrote it.
- */
- }
-}
-
/*
* This must be called ONCE during postmaster or standalone-backend startup,
* after StartupXLOG has initialized ShmemVariableCache->nextXid.
/*
* Initialize our idea of the latest page number.
*/
- ClogCtl->latest_page_number = TransactionIdToPage(ShmemVariableCache->nextXid);
+ SimpleLruSetLatestPage(ClogCtl, TransactionIdToPage(ShmemVariableCache->nextXid));
}
/*
void
ShutdownCLOG(void)
{
- int slotno;
-
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
-
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- {
- WriteCLOGPage(slotno);
- Assert(ClogCtl->page_status[slotno] == CLOG_PAGE_EMPTY ||
- ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN);
- }
-
- LWLockRelease(CLogControlLock);
+ SimpleLruFlush(ClogCtl, false);
}
/*
void
CheckPointCLOG(void)
{
- int slotno;
-
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
-
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- {
- WriteCLOGPage(slotno);
-
- /*
- * We cannot assert that the slot is clean now, since another
- * process might have re-dirtied it already. That's okay.
- */
- }
-
- LWLockRelease(CLogControlLock);
+ SimpleLruFlush(ClogCtl, true);
}
pageno = TransactionIdToPage(newestXact);
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
+ LWLockAcquire(ClogCtl->locks->ControlLock, LW_EXCLUSIVE);
/* Zero the page and make an XLOG entry about it */
ZeroCLOGPage(pageno, true);
- LWLockRelease(CLogControlLock);
+ LWLockRelease(ClogCtl->locks->ControlLock);
}
TruncateCLOG(TransactionId oldestXact)
{
int cutoffPage;
- int slotno;
/*
* The cutoff point is the start of the segment containing oldestXact.
+ * We pass the *page* containing oldestXact to SimpleLruTruncate.
*/
- oldestXact -= oldestXact % CLOG_XACTS_PER_SEGMENT;
cutoffPage = TransactionIdToPage(oldestXact);
-
- if (!ScanCLOGDirectory(cutoffPage, false))
- return; /* nothing to remove */
-
- /* Perform a forced CHECKPOINT */
- CreateCheckPoint(false, true);
-
- /*
- * Scan CLOG shared memory and remove any pages preceding the cutoff
- * page, to ensure we won't rewrite them later. (Any dirty pages
- * should have been flushed already during the checkpoint, we're just
- * being extra careful here.)
- */
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
-
-restart:;
-
- /*
- * While we are holding the lock, make an important safety check: the
- * planned cutoff point must be <= the current CLOG endpoint page.
- * Otherwise we have already wrapped around, and proceeding with the
- * truncation would risk removing the current CLOG segment.
- */
- if (CLOGPagePrecedes(ClogCtl->latest_page_number, cutoffPage))
- {
- LWLockRelease(CLogControlLock);
- elog(LOG, "unable to truncate commit log: apparent wraparound");
- return;
- }
-
- for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
- {
- if (ClogCtl->page_status[slotno] == CLOG_PAGE_EMPTY)
- continue;
- if (!CLOGPagePrecedes(ClogCtl->page_number[slotno], cutoffPage))
- continue;
-
- /*
- * If page is CLEAN, just change state to EMPTY (expected case).
- */
- if (ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN)
- {
- ClogCtl->page_status[slotno] = CLOG_PAGE_EMPTY;
- continue;
- }
-
- /*
- * Hmm, we have (or may have) I/O operations acting on the page,
- * so we've got to wait for them to finish and then start again.
- * This is the same logic as in SelectLRUCLOGPage.
- */
- if (ClogCtl->page_status[slotno] == CLOG_PAGE_READ_IN_PROGRESS)
- (void) ReadCLOGPage(ClogCtl->page_number[slotno],
- InvalidTransactionId);
- else
- WriteCLOGPage(slotno);
- goto restart;
- }
-
- LWLockRelease(CLogControlLock);
-
- /* Now we can remove the old CLOG segment(s) */
- (void) ScanCLOGDirectory(cutoffPage, true);
+ SimpleLruTruncate(ClogCtl, cutoffPage);
}
-/*
- * TruncateCLOG subroutine: scan CLOG directory for removable segments.
- * Actually remove them iff doDeletions is true. Return TRUE iff any
- * removable segments were found. Note: no locking is needed.
- */
-static bool
-ScanCLOGDirectory(int cutoffPage, bool doDeletions)
-{
- bool found = false;
- DIR *cldir;
- struct dirent *clde;
- int segno;
- int segpage;
- char path[MAXPGPATH];
-
- cldir = opendir(ClogDir);
- if (cldir == NULL)
- elog(ERROR, "could not open transaction-commit log directory (%s): %m",
- ClogDir);
-
- errno = 0;
- while ((clde = readdir(cldir)) != NULL)
- {
- if (strlen(clde->d_name) == 4 &&
- strspn(clde->d_name, "0123456789ABCDEF") == 4)
- {
- segno = (int) strtol(clde->d_name, NULL, 16);
- segpage = segno * CLOG_PAGES_PER_SEGMENT;
- if (CLOGPagePrecedes(segpage, cutoffPage))
- {
- found = true;
- if (doDeletions)
- {
- elog(LOG, "removing commit log file %s", clde->d_name);
- snprintf(path, MAXPGPATH, "%s/%s", ClogDir, clde->d_name);
- unlink(path);
- }
- }
- }
- errno = 0;
- }
- if (errno)
- elog(ERROR, "could not read transaction-commit log directory (%s): %m",
- ClogDir);
- closedir(cldir);
-
- return found;
-}
/*
* Decide which of two CLOG page numbers is "older" for truncation purposes.
memcpy(&pageno, XLogRecGetData(record), sizeof(int));
- LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
+ LWLockAcquire(ClogCtl->locks->ControlLock, LW_EXCLUSIVE);
slotno = ZeroCLOGPage(pageno, false);
- WriteCLOGPage(slotno);
- Assert(ClogCtl->page_status[slotno] == CLOG_PAGE_CLEAN);
+ SimpleLruWritePage(ClogCtl, slotno);
+ /* Assert(ClogCtl->page_status[slotno] == SLRU_PAGE_CLEAN); */
- LWLockRelease(CLogControlLock);
+ LWLockRelease(ClogCtl->locks->ControlLock);
}
}
--- /dev/null
+/*-------------------------------------------------------------------------
+ *
+ * slru.c
+ * Simple LRU
+ *
+ * This module replaces the old "pg_log" access code, which treated pg_log
+ * essentially like a relation, in that it went through the regular buffer
+ * manager. The problem with that was that there wasn't any good way to
+ * recycle storage space for transactions so old that they'll never be
+ * looked up again. Now we use specialized access code so that the commit
+ * log can be broken into relatively small, independent segments.
+ *
+ * Portions Copyright (c) 2003, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * $Header: /cvsroot/pgsql/src/backend/access/transam/slru.c,v 1.1 2003/06/11 22:37:45 momjian Exp $
+ *
+ *-------------------------------------------------------------------------
+ */
+#include "postgres.h"
+
+#include <fcntl.h>
+#include <dirent.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include "access/slru.h"
+#include "storage/lwlock.h"
+#include "miscadmin.h"
+
+
+/*
+ * Define segment size. A page is the same BLCKSZ as is used everywhere
+ * else in Postgres. The segment size can be chosen somewhat arbitrarily;
+ * we make it 32 pages by default, or 256Kb, i.e. 1M transactions for CLOG
+ * or 64K transactions for SUBTRANS.
+ *
+ * Note: because TransactionIds are 32 bits and wrap around at 0xFFFFFFFF,
+ * page numbering also wraps around at 0xFFFFFFFF/xxxx_XACTS_PER_PAGE (where
+ * xxxx is CLOG or SUBTRANS, respectively), and segment numbering at
+ * 0xFFFFFFFF/xxxx_XACTS_PER_PAGE/SLRU_PAGES_PER_SEGMENT. We need
+ * take no explicit notice of that fact in this module, except when comparing
+ * segment and page numbers in SimpleLruTruncate (see PagePrecedes()).
+ */
+
+#define SLRU_PAGES_PER_SEGMENT 32
+
+
+/*----------
+ * Shared-memory data structures for SLRU control
+ *
+ * We use a simple least-recently-used scheme to manage a pool of page
+ * buffers. Under ordinary circumstances we expect that write
+ * traffic will occur mostly to the latest page (and to the just-prior
+ * page, soon after a page transition). Read traffic will probably touch
+ * a larger span of pages, but in any case a fairly small number of page
+ * buffers should be sufficient. So, we just search the buffers using plain
+ * linear search; there's no need for a hashtable or anything fancy.
+ * The management algorithm is straight LRU except that we will never swap
+ * out the latest page (since we know it's going to be hit again eventually).
+ *
+ * We use a control LWLock to protect the shared data structures, plus
+ * per-buffer LWLocks that synchronize I/O for each buffer. A process
+ * that is reading in or writing out a page buffer does not hold the control
+ * lock, only the per-buffer lock for the buffer it is working on.
+ *
+ * To change the page number or state of a buffer, one must normally hold
+ * the control lock. (The sole exception to this rule is that a writer
+ * process changes the state from DIRTY to WRITE_IN_PROGRESS while holding
+ * only the per-buffer lock.) If the buffer's state is neither EMPTY nor
+ * CLEAN, then there may be processes doing (or waiting to do) I/O on the
+ * buffer, so the page number may not be changed, and the only allowed state
+ * transition is to change WRITE_IN_PROGRESS to DIRTY after dirtying the page.
+ * To do any other state transition involving a buffer with potential I/O
+ * processes, one must hold both the per-buffer lock and the control lock.
+ * (Note the control lock must be acquired second; do not wait on a buffer
+ * lock while holding the control lock.) A process wishing to read a page
+ * marks the buffer state as READ_IN_PROGRESS, then drops the control lock,
+ * acquires the per-buffer lock, and rechecks the state before proceeding.
+ * This recheck takes care of the possibility that someone else already did
+ * the read, while the early marking prevents someone else from trying to
+ * read the same page into a different buffer.
+ *
+ * Note we are assuming that read and write of the state value is atomic,
+ * since I/O processes may examine and change the state while not holding
+ * the control lock.
+ *
+ * As with the regular buffer manager, it is possible for another process
+ * to re-dirty a page that is currently being written out. This is handled
+ * by setting the page's state from WRITE_IN_PROGRESS to DIRTY. The writing
+ * process must notice this and not mark the page CLEAN when it's done.
+ *----------
+ */
+
+typedef enum
+{
+ SLRU_PAGE_EMPTY, /* buffer is not in use */
+ SLRU_PAGE_READ_IN_PROGRESS, /* page is being read in */
+ SLRU_PAGE_CLEAN, /* page is valid and not dirty */
+ SLRU_PAGE_DIRTY, /* page is valid but needs write */
+ SLRU_PAGE_WRITE_IN_PROGRESS /* page is being written out */
+} SlruPageStatus;
+
+/*
+ * Shared-memory state
+ */
+typedef struct SlruSharedData
+{
+ /*
+ * Info for each buffer slot. Page number is undefined when status is
+ * EMPTY. lru_count is essentially the number of page switches since
+ * last use of this page; the page with highest lru_count is the best
+ * candidate to replace.
+ */
+ char *page_buffer[NUM_CLOG_BUFFERS];
+ SlruPageStatus page_status[NUM_CLOG_BUFFERS];
+ int page_number[NUM_CLOG_BUFFERS];
+ unsigned int page_lru_count[NUM_CLOG_BUFFERS];
+
+ /*
+ * latest_page_number is the page number of the current end of the
+ * CLOG; this is not critical data, since we use it only to avoid
+ * swapping out the latest page.
+ */
+ int latest_page_number;
+} SlruSharedData;
+typedef SlruSharedData *SlruShared;
+
+
+#define SlruFileName(ctl, path, seg) \
+ snprintf(path, MAXPGPATH, "%s/%04X", (ctl)->Dir, seg)
+
+/*
+ * Macro to mark a buffer slot "most recently used".
+ */
+#define SlruRecentlyUsed(shared, slotno) \
+ do { \
+ if ((shared)->page_lru_count[slotno] != 0) { \
+ int iilru; \
+ for (iilru = 0; iilru < NUM_CLOG_BUFFERS; iilru++) \
+ (shared)->page_lru_count[iilru]++; \
+ (shared)->page_lru_count[slotno] = 0; \
+ } \
+ } while (0)
+
+/* Saved info for SlruReportIOError */
+typedef enum
+{
+ SLRU_OPEN_FAILED,
+ SLRU_CREATE_FAILED,
+ SLRU_SEEK_FAILED,
+ SLRU_READ_FAILED,
+ SLRU_WRITE_FAILED
+} SlruErrorCause;
+static SlruErrorCause slru_errcause;
+static int slru_errno;
+
+
+static bool SlruPhysicalReadPage(SlruCtl ctl, int pageno, int slotno);
+static bool SlruPhysicalWritePage(SlruCtl ctl, int pageno, int slotno);
+static void SlruReportIOError(SlruCtl ctl, int pageno, TransactionId xid);
+static int SlruSelectLRUPage(SlruCtl ctl, int pageno);
+static bool SlruScanDirectory(SlruCtl ctl, int cutoffPage, bool doDeletions);
+
+
+/*
+ * Initialization of shared memory
+ */
+
+int
+SimpleLruShmemSize(void)
+{
+ return MAXALIGN(sizeof(SlruSharedData)) + BLCKSZ * NUM_CLOG_BUFFERS
+#ifdef EXEC_BACKEND
+ + MAXALIGN(sizeof(SlruLockData))
+#endif
+ ;
+}
+
+void
+SimpleLruInit(SlruCtl ctl, const char *name, const char *subdir)
+{
+ bool found;
+ char *ptr;
+ SlruShared shared;
+ SlruLock locks;
+
+ ptr = ShmemInitStruct(name, SimpleLruShmemSize(), &found);
+ shared = (SlruShared) ptr;
+
+#ifdef EXEC_BACKEND
+ /*
+ * Locks are in shared memory
+ */
+ locks = (SlruLock)(ptr + MAXALIGN(sizeof(SlruSharedData)) +
+ BLCKSZ * NUM_CLOG_BUFFERS);
+#else
+ /*
+ * Locks are in private memory
+ */
+ Assert(!IsUnderPostmaster);
+ locks = malloc(sizeof(SlruLockData));
+ Assert(locks);
+#endif
+
+
+ if (!IsUnderPostmaster)
+ /* Initialize locks and shared memory area */
+ {
+ char *bufptr;
+ int slotno;
+
+ Assert(!found);
+
+ locks->ControlLock = LWLockAssign();
+
+ memset(shared, 0, sizeof(SlruSharedData));
+
+ bufptr = (char *)shared + MAXALIGN(sizeof(SlruSharedData));
+
+ for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
+ {
+ locks->BufferLocks[slotno] = LWLockAssign();
+ shared->page_buffer[slotno] = bufptr;
+ shared->page_status[slotno] = SLRU_PAGE_EMPTY;
+ shared->page_lru_count[slotno] = 1;
+ bufptr += BLCKSZ;
+ }
+
+ /* shared->latest_page_number will be set later */
+ }
+ else
+ Assert(found);
+
+
+ ctl->locks = locks;
+ ctl->shared = shared;
+
+
+ /* Init directory path */
+ snprintf(ctl->Dir, MAXPGPATH, "%s/%s", DataDir, subdir);
+}
+
+/*
+ * Initialize (or reinitialize) a page to zeroes.
+ *
+ * The page is not actually written, just set up in shared memory.
+ * The slot number of the new page is returned.
+ *
+ * Control lock must be held at entry, and will be held at exit.
+ */
+int
+SimpleLruZeroPage(SlruCtl ctl, int pageno)
+{
+ int slotno;
+ SlruShared shared = (SlruShared) ctl->shared;
+
+ /* Find a suitable buffer slot for the page */
+ slotno = SlruSelectLRUPage(ctl, pageno);
+ Assert(shared->page_status[slotno] == SLRU_PAGE_EMPTY ||
+ shared->page_status[slotno] == SLRU_PAGE_CLEAN ||
+ shared->page_number[slotno] == pageno);
+
+ /* Mark the slot as containing this page */
+ shared->page_number[slotno] = pageno;
+ shared->page_status[slotno] = SLRU_PAGE_DIRTY;
+ SlruRecentlyUsed(shared, slotno);
+
+ /* Set the buffer to zeroes */
+ MemSet(shared->page_buffer[slotno], 0, BLCKSZ);
+
+ /* Assume this page is now the latest active page */
+ shared->latest_page_number = pageno;
+
+ return slotno;
+}
+
+/*
+ * Find a page in a shared buffer, reading it in if necessary.
+ * The page number must correspond to an already-initialized page.
+ *
+ * The passed-in xid is used only for error reporting, and may be
+ * InvalidTransactionId if no specific xid is associated with the action.
+ *
+ * Return value is the shared-buffer address of the page.
+ * The buffer's LRU access info is updated.
+ * If forwrite is true, the buffer is marked as dirty.
+ *
+ * Control lock must be held at entry, and will be held at exit.
+ */
+char *
+SimpleLruReadPage(SlruCtl ctl, int pageno, TransactionId xid, bool forwrite)
+{
+ SlruShared shared = (SlruShared) ctl->shared;
+
+ /* Outer loop handles restart if we lose the buffer to someone else */
+ for (;;)
+ {
+ int slotno;
+ bool ok;
+
+ /* See if page already is in memory; if not, pick victim slot */
+ slotno = SlruSelectLRUPage(ctl, pageno);
+
+ /* Did we find the page in memory? */
+ if (shared->page_number[slotno] == pageno &&
+ shared->page_status[slotno] != SLRU_PAGE_EMPTY)
+ {
+ /* If page is still being read in, we cannot use it yet */
+ if (shared->page_status[slotno] != SLRU_PAGE_READ_IN_PROGRESS)
+ {
+ /* otherwise, it's ready to use */
+ SlruRecentlyUsed(shared, slotno);
+ if (forwrite)
+ shared->page_status[slotno] = SLRU_PAGE_DIRTY;
+ return shared->page_buffer[slotno];
+ }
+ }
+ else
+ {
+ /* We found no match; assert we selected a freeable slot */
+ Assert(shared->page_status[slotno] == SLRU_PAGE_EMPTY ||
+ shared->page_status[slotno] == SLRU_PAGE_CLEAN);
+ }
+
+ /* Mark the slot read-busy (no-op if it already was) */
+ shared->page_number[slotno] = pageno;
+ shared->page_status[slotno] = SLRU_PAGE_READ_IN_PROGRESS;
+
+ /*
+ * Temporarily mark page as recently-used to discourage
+ * SlruSelectLRUPage from selecting it again for someone else.
+ */
+ SlruRecentlyUsed(shared, slotno);
+
+ /* Release shared lock, grab per-buffer lock instead */
+ LWLockRelease(ctl->locks->ControlLock);
+ LWLockAcquire(ctl->locks->BufferLocks[slotno], LW_EXCLUSIVE);
+
+ /*
+ * Check to see if someone else already did the read, or took the
+ * buffer away from us. If so, restart from the top.
+ */
+ if (shared->page_number[slotno] != pageno ||
+ shared->page_status[slotno] != SLRU_PAGE_READ_IN_PROGRESS)
+ {
+ LWLockRelease(ctl->locks->BufferLocks[slotno]);
+ LWLockAcquire(ctl->locks->ControlLock, LW_EXCLUSIVE);
+ continue;
+ }
+
+ /* Okay, do the read */
+ ok = SlruPhysicalReadPage(ctl, pageno, slotno);
+
+ /* Re-acquire shared control lock and update page state */
+ LWLockAcquire(ctl->locks->ControlLock, LW_EXCLUSIVE);
+
+ Assert(shared->page_number[slotno] == pageno &&
+ shared->page_status[slotno] == SLRU_PAGE_READ_IN_PROGRESS);
+
+ shared->page_status[slotno] = ok ? SLRU_PAGE_CLEAN : SLRU_PAGE_EMPTY;
+
+ LWLockRelease(ctl->locks->BufferLocks[slotno]);
+
+ /* Now it's okay to elog if we failed */
+ if (!ok)
+ SlruReportIOError(ctl, pageno, xid);
+
+ SlruRecentlyUsed(shared, slotno);
+ if (forwrite)
+ shared->page_status[slotno] = SLRU_PAGE_DIRTY;
+ return shared->page_buffer[slotno];
+ }
+}
+
+/*
+ * Write a page from a shared buffer, if necessary.
+ * Does nothing if the specified slot is not dirty.
+ *
+ * NOTE: only one write attempt is made here. Hence, it is possible that
+ * the page is still dirty at exit (if someone else re-dirtied it during
+ * the write). However, we *do* attempt a fresh write even if the page
+ * is already being written; this is for checkpoints.
+ *
+ * Control lock must be held at entry, and will be held at exit.
+ */
+void
+SimpleLruWritePage(SlruCtl ctl, int slotno)
+{
+ int pageno;
+ bool ok;
+ SlruShared shared = (SlruShared) ctl->shared;
+
+ /* Do nothing if page does not need writing */
+ if (shared->page_status[slotno] != SLRU_PAGE_DIRTY &&
+ shared->page_status[slotno] != SLRU_PAGE_WRITE_IN_PROGRESS)
+ return;
+
+ pageno = shared->page_number[slotno];
+
+ /* Release shared lock, grab per-buffer lock instead */
+ LWLockRelease(ctl->locks->ControlLock);
+ LWLockAcquire(ctl->locks->BufferLocks[slotno], LW_EXCLUSIVE);
+
+ /*
+ * Check to see if someone else already did the write, or took the
+ * buffer away from us. If so, do nothing. NOTE: we really should
+ * never see WRITE_IN_PROGRESS here, since that state should only
+ * occur while the writer is holding the buffer lock. But accept it
+ * so that we have a recovery path if a writer aborts.
+ */
+ if (shared->page_number[slotno] != pageno ||
+ (shared->page_status[slotno] != SLRU_PAGE_DIRTY &&
+ shared->page_status[slotno] != SLRU_PAGE_WRITE_IN_PROGRESS))
+ {
+ LWLockRelease(ctl->locks->BufferLocks[slotno]);
+ LWLockAcquire(ctl->locks->ControlLock, LW_EXCLUSIVE);
+ return;
+ }
+
+ /*
+ * Mark the slot write-busy. After this point, a transaction status
+ * update on this page will mark it dirty again. NB: we are assuming
+ * that read/write of the page status field is atomic, since we change
+ * the state while not holding control lock. However, we cannot set
+ * this state any sooner, or we'd possibly fool a previous writer into
+ * thinking he's successfully dumped the page when he hasn't.
+ * (Scenario: other writer starts, page is redirtied, we come along
+ * and set WRITE_IN_PROGRESS again, other writer completes and sets
+ * CLEAN because redirty info has been lost, then we think it's clean
+ * too.)
+ */
+ shared->page_status[slotno] = SLRU_PAGE_WRITE_IN_PROGRESS;
+
+ /* Okay, do the write */
+ ok = SlruPhysicalWritePage(ctl, pageno, slotno);
+
+ /* Re-acquire shared control lock and update page state */
+ LWLockAcquire(ctl->locks->ControlLock, LW_EXCLUSIVE);
+
+ Assert(shared->page_number[slotno] == pageno &&
+ (shared->page_status[slotno] == SLRU_PAGE_WRITE_IN_PROGRESS ||
+ shared->page_status[slotno] == SLRU_PAGE_DIRTY));
+
+ /* Cannot set CLEAN if someone re-dirtied page since write started */
+ if (shared->page_status[slotno] == SLRU_PAGE_WRITE_IN_PROGRESS)
+ shared->page_status[slotno] = ok ? SLRU_PAGE_CLEAN : SLRU_PAGE_DIRTY;
+
+ LWLockRelease(ctl->locks->BufferLocks[slotno]);
+
+ /* Now it's okay to elog if we failed */
+ if (!ok)
+ SlruReportIOError(ctl, pageno, InvalidTransactionId);
+}
+
+/*
+ * Physical read of a (previously existing) page into a buffer slot
+ *
+ * On failure, we cannot just elog(ERROR) since caller has put state in
+ * shared memory that must be undone. So, we return FALSE and save enough
+ * info in static variables to let SlruReportIOError make the report.
+ *
+ * For now, assume it's not worth keeping a file pointer open across
+ * read/write operations. We could cache one virtual file pointer ...
+ */
+static bool
+SlruPhysicalReadPage(SlruCtl ctl, int pageno, int slotno)
+{
+ SlruShared shared = (SlruShared) ctl->shared;
+ int segno = pageno / SLRU_PAGES_PER_SEGMENT;
+ int rpageno = pageno % SLRU_PAGES_PER_SEGMENT;
+ int offset = rpageno * BLCKSZ;
+ char path[MAXPGPATH];
+ int fd;
+
+ SlruFileName(ctl, path, segno);
+
+ /*
+ * In a crash-and-restart situation, it's possible for us to receive
+ * commands to set the commit status of transactions whose bits are in
+ * already-truncated segments of the commit log (see notes in
+ * SlruPhysicalWritePage). Hence, if we are InRecovery, allow the
+ * case where the file doesn't exist, and return zeroes instead.
+ */
+ fd = BasicOpenFile(path, O_RDWR | PG_BINARY, S_IRUSR | S_IWUSR);
+ if (fd < 0)
+ {
+ if (errno != ENOENT || !InRecovery)
+ {
+ slru_errcause = SLRU_OPEN_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+
+ elog(LOG, "file %s doesn't exist, reading as zeroes", path);
+ MemSet(shared->page_buffer[slotno], 0, BLCKSZ);
+ return true;
+ }
+
+ if (lseek(fd, (off_t) offset, SEEK_SET) < 0)
+ {
+ slru_errcause = SLRU_SEEK_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+
+ errno = 0;
+ if (read(fd, shared->page_buffer[slotno], BLCKSZ) != BLCKSZ)
+ {
+ slru_errcause = SLRU_READ_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+
+ close(fd);
+ return true;
+}
+
+/*
+ * Physical write of a page from a buffer slot
+ *
+ * On failure, we cannot just elog(ERROR) since caller has put state in
+ * shared memory that must be undone. So, we return FALSE and save enough
+ * info in static variables to let SlruReportIOError make the report.
+ *
+ * For now, assume it's not worth keeping a file pointer open across
+ * read/write operations. We could cache one virtual file pointer ...
+ */
+static bool
+SlruPhysicalWritePage(SlruCtl ctl, int pageno, int slotno)
+{
+ SlruShared shared = (SlruShared) ctl->shared;
+ int segno = pageno / SLRU_PAGES_PER_SEGMENT;
+ int rpageno = pageno % SLRU_PAGES_PER_SEGMENT;
+ int offset = rpageno * BLCKSZ;
+ char path[MAXPGPATH];
+ int fd;
+
+ SlruFileName(ctl, path, segno);
+
+ /*
+ * If the file doesn't already exist, we should create it. It is
+ * possible for this to need to happen when writing a page that's not
+ * first in its segment; we assume the OS can cope with that. (Note:
+ * it might seem that it'd be okay to create files only when
+ * SimpleLruZeroPage is called for the first page of a segment. However,
+ * if after a crash and restart the REDO logic elects to replay the
+ * log from a checkpoint before the latest one, then it's possible
+ * that we will get commands to set transaction status of transactions
+ * that have already been truncated from the commit log. Easiest way
+ * to deal with that is to accept references to nonexistent files here
+ * and in SlruPhysicalReadPage.)
+ */
+ fd = BasicOpenFile(path, O_RDWR | PG_BINARY, S_IRUSR | S_IWUSR);
+ if (fd < 0)
+ {
+ if (errno != ENOENT)
+ {
+ slru_errcause = SLRU_OPEN_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+
+ fd = BasicOpenFile(path, O_RDWR | O_CREAT | O_EXCL | PG_BINARY,
+ S_IRUSR | S_IWUSR);
+ if (fd < 0)
+ {
+ slru_errcause = SLRU_CREATE_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+ }
+
+ if (lseek(fd, (off_t) offset, SEEK_SET) < 0)
+ {
+ slru_errcause = SLRU_SEEK_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+
+ errno = 0;
+ if (write(fd, shared->page_buffer[slotno], BLCKSZ) != BLCKSZ)
+ {
+ /* if write didn't set errno, assume problem is no disk space */
+ if (errno == 0)
+ errno = ENOSPC;
+ slru_errcause = SLRU_WRITE_FAILED;
+ slru_errno = errno;
+ return false;
+ }
+
+ close(fd);
+ return true;
+}
+
+/*
+ * Issue the error message after failure of SlruPhysicalReadPage or
+ * SlruPhysicalWritePage. Call this after cleaning up shared-memory state.
+ */
+static void
+SlruReportIOError(SlruCtl ctl, int pageno, TransactionId xid)
+{
+ int segno = pageno / SLRU_PAGES_PER_SEGMENT;
+ int rpageno = pageno % SLRU_PAGES_PER_SEGMENT;
+ int offset = rpageno * BLCKSZ;
+ char path[MAXPGPATH];
+
+ /* XXX TODO: provide xid as context in error messages */
+
+ SlruFileName(ctl, path, segno);
+ errno = slru_errno;
+ switch (slru_errcause)
+ {
+ case SLRU_OPEN_FAILED:
+ elog(ERROR, "open of %s failed: %m", path);
+ break;
+ case SLRU_CREATE_FAILED:
+ elog(ERROR, "creation of file %s failed: %m", path);
+ break;
+ case SLRU_SEEK_FAILED:
+ elog(ERROR, "lseek of file %s, offset %u failed: %m",
+ path, offset);
+ break;
+ case SLRU_READ_FAILED:
+ elog(ERROR, "read of file %s, offset %u failed: %m",
+ path, offset);
+ break;
+ case SLRU_WRITE_FAILED:
+ elog(ERROR, "write of file %s, offset %u failed: %m",
+ path, offset);
+ break;
+ default:
+ /* can't get here, we trust */
+ elog(ERROR, "unknown SimpleLru I/O error");
+ break;
+ }
+}
+
+/*
+ * Select the slot to re-use when we need a free slot.
+ *
+ * The target page number is passed because we need to consider the
+ * possibility that some other process reads in the target page while
+ * we are doing I/O to free a slot. Hence, check or recheck to see if
+ * any slot already holds the target page, and return that slot if so.
+ * Thus, the returned slot is *either* a slot already holding the pageno
+ * (could be any state except EMPTY), *or* a freeable slot (state EMPTY
+ * or CLEAN).
+ *
+ * Control lock must be held at entry, and will be held at exit.
+ */
+static int
+SlruSelectLRUPage(SlruCtl ctl, int pageno)
+{
+ SlruShared shared = (SlruShared) ctl->shared;
+ /* Outer loop handles restart after I/O */
+ for (;;)
+ {
+ int slotno;
+ int bestslot = 0;
+ unsigned int bestcount = 0;
+
+ /* See if page already has a buffer assigned */
+ for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
+ {
+ if (shared->page_number[slotno] == pageno &&
+ shared->page_status[slotno] != SLRU_PAGE_EMPTY)
+ return slotno;
+ }
+
+ /*
+ * If we find any EMPTY slot, just select that one. Else locate
+ * the least-recently-used slot that isn't the latest page.
+ */
+ for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
+ {
+ if (shared->page_status[slotno] == SLRU_PAGE_EMPTY)
+ return slotno;
+ if (shared->page_lru_count[slotno] > bestcount &&
+ shared->page_number[slotno] != shared->latest_page_number)
+ {
+ bestslot = slotno;
+ bestcount = shared->page_lru_count[slotno];
+ }
+ }
+
+ /*
+ * If the selected page is clean, we're set.
+ */
+ if (shared->page_status[bestslot] == SLRU_PAGE_CLEAN)
+ return bestslot;
+
+ /*
+ * We need to do I/O. Normal case is that we have to write it
+ * out, but it's possible in the worst case to have selected a
+ * read-busy page. In that case we use SimpleLruReadPage to wait for
+ * the read to complete.
+ */
+ if (shared->page_status[bestslot] == SLRU_PAGE_READ_IN_PROGRESS)
+ (void) SimpleLruReadPage(ctl, shared->page_number[bestslot],
+ InvalidTransactionId, false);
+ else
+ SimpleLruWritePage(ctl, bestslot);
+
+ /*
+ * Now loop back and try again. This is the easiest way of
+ * dealing with corner cases such as the victim page being
+ * re-dirtied while we wrote it.
+ */
+ }
+}
+
+/*
+ * This must be called ONCE during postmaster or standalone-backend startup
+ */
+void
+SimpleLruSetLatestPage(SlruCtl ctl, int pageno)
+{
+ SlruShared shared = (SlruShared) ctl->shared;
+
+ shared->latest_page_number = pageno;
+}
+
+/*
+ * This is called during checkpoint and postmaster/standalone-backend shutdown
+ */
+void
+SimpleLruFlush(SlruCtl ctl, bool checkpoint)
+{
+ SlruShared shared = (SlruShared) ctl->shared;
+ int slotno;
+
+ LWLockAcquire(ctl->locks->ControlLock, LW_EXCLUSIVE);
+
+ for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
+ {
+ SimpleLruWritePage(ctl, slotno);
+ /*
+ * When called during a checkpoint,
+ * we cannot assert that the slot is clean now, since another
+ * process might have re-dirtied it already. That's okay.
+ */
+ Assert(checkpoint ||
+ shared->page_status[slotno] == SLRU_PAGE_EMPTY ||
+ shared->page_status[slotno] == SLRU_PAGE_CLEAN);
+ }
+
+ LWLockRelease(ctl->locks->ControlLock);
+}
+
+/*
+ * Remove all segments before the one holding the passed page number
+ *
+ * When this is called, we know that the database logically contains no
+ * reference to transaction IDs older than oldestXact. However, we must
+ * not remove any segment until we have performed a checkpoint, to ensure
+ * that no such references remain on disk either; else a crash just after
+ * the truncation might leave us with a problem. Since CLOG segments hold
+ * a large number of transactions, the opportunity to actually remove a
+ * segment is fairly rare, and so it seems best not to do the checkpoint
+ * unless we have confirmed that there is a removable segment. Therefore
+ * we issue the checkpoint command here, not in higher-level code as might
+ * seem cleaner.
+ */
+void
+SimpleLruTruncate(SlruCtl ctl, int cutoffPage)
+{
+ int slotno;
+ SlruShared shared = (SlruShared) ctl->shared;
+
+ /*
+ * The cutoff point is the start of the segment containing cutoffPage.
+ */
+ cutoffPage -= cutoffPage % SLRU_PAGES_PER_SEGMENT;
+
+ if (!SlruScanDirectory(ctl, cutoffPage, false))
+ return; /* nothing to remove */
+
+ /* Perform a forced CHECKPOINT */
+ CreateCheckPoint(false, true);
+
+ /*
+ * Scan shared memory and remove any pages preceding the cutoff
+ * page, to ensure we won't rewrite them later. (Any dirty pages
+ * should have been flushed already during the checkpoint, we're just
+ * being extra careful here.)
+ */
+ LWLockAcquire(ctl->locks->ControlLock, LW_EXCLUSIVE);
+
+restart:;
+
+ /*
+ * While we are holding the lock, make an important safety check: the
+ * planned cutoff point must be <= the current endpoint page.
+ * Otherwise we have already wrapped around, and proceeding with the
+ * truncation would risk removing the current segment.
+ */
+ if (ctl->PagePrecedes(shared->latest_page_number, cutoffPage))
+ {
+ LWLockRelease(ctl->locks->ControlLock);
+ elog(LOG, "unable to truncate %s: apparent wraparound", ctl->Dir);
+ return;
+ }
+
+ for (slotno = 0; slotno < NUM_CLOG_BUFFERS; slotno++)
+ {
+ if (shared->page_status[slotno] == SLRU_PAGE_EMPTY)
+ continue;
+ if (!ctl->PagePrecedes(shared->page_number[slotno], cutoffPage))
+ continue;
+
+ /*
+ * If page is CLEAN, just change state to EMPTY (expected case).
+ */
+ if (shared->page_status[slotno] == SLRU_PAGE_CLEAN)
+ {
+ shared->page_status[slotno] = SLRU_PAGE_EMPTY;
+ continue;
+ }
+
+ /*
+ * Hmm, we have (or may have) I/O operations acting on the page,
+ * so we've got to wait for them to finish and then start again.
+ * This is the same logic as in SlruSelectLRUPage.
+ */
+ if (shared->page_status[slotno] == SLRU_PAGE_READ_IN_PROGRESS)
+ (void) SimpleLruReadPage(ctl, shared->page_number[slotno],
+ InvalidTransactionId, false);
+ else
+ SimpleLruWritePage(ctl, slotno);
+ goto restart;
+ }
+
+ LWLockRelease(ctl->locks->ControlLock);
+
+ /* Now we can remove the old segment(s) */
+ (void) SlruScanDirectory(ctl, cutoffPage, true);
+}
+
+/*
+ * SlruTruncate subroutine: scan directory for removable segments.
+ * Actually remove them iff doDeletions is true. Return TRUE iff any
+ * removable segments were found. Note: no locking is needed.
+ */
+static bool
+SlruScanDirectory(SlruCtl ctl, int cutoffPage, bool doDeletions)
+{
+ bool found = false;
+ DIR *cldir;
+ struct dirent *clde;
+ int segno;
+ int segpage;
+ char path[MAXPGPATH];
+
+ cldir = opendir(ctl->Dir);
+ if (cldir == NULL)
+ elog(ERROR, "could not open directory (%s): %m", ctl->Dir);
+
+ errno = 0;
+ while ((clde = readdir(cldir)) != NULL)
+ {
+ if (strlen(clde->d_name) == 4 &&
+ strspn(clde->d_name, "0123456789ABCDEF") == 4)
+ {
+ segno = (int) strtol(clde->d_name, NULL, 16);
+ segpage = segno * SLRU_PAGES_PER_SEGMENT;
+ if (ctl->PagePrecedes(segpage, cutoffPage))
+ {
+ found = true;
+ if (doDeletions)
+ {
+ elog(LOG, "removing file %s/%s", ctl->Dir, clde->d_name);
+ snprintf(path, MAXPGPATH, "%s/%s", ctl->Dir, clde->d_name);
+ unlink(path);
+ }
+ }
+ }
+ errno = 0;
+ }
+ if (errno)
+ elog(ERROR, "could not read directory (%s): %m", ctl->Dir);
+ closedir(cldir);
+
+ return found;
+}
* Portions Copyright (c) 1994, Regents of the University of California
*
* IDENTIFICATION
- * $Header: /cvsroot/pgsql/src/backend/storage/lmgr/lwlock.c,v 1.14 2002/09/25 20:31:40 tgl Exp $
+ * $Header: /cvsroot/pgsql/src/backend/storage/lmgr/lwlock.c,v 1.15 2003/06/11 22:37:45 momjian Exp $
*
*-------------------------------------------------------------------------
*/
/* bufmgr.c needs two for each shared buffer */
numLocks += 2 * NBuffers;
- /* clog.c needs one per CLOG buffer */
- numLocks += NUM_CLOG_BUFFERS;
+ /* clog.c needs one per CLOG buffer + one control lock */
+ numLocks += NUM_CLOG_BUFFERS + 1;
/* Perhaps create a few more for use by user-defined modules? */
--- /dev/null
+/*
+ * slru.h
+ *
+ * Simple LRU
+ *
+ * Portions Copyright (c) 2003, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * $Id: slru.h,v 1.1 2003/06/11 22:37:46 momjian Exp $
+ */
+#ifndef SLRU_H
+#define SLRU_H
+
+#include "access/xlog.h"
+
+/* exported because lwlock.c needs it */
+#define NUM_CLOG_BUFFERS 8
+
+typedef struct SlruLockData
+{
+ LWLockId ControlLock;
+/*
+ * BufferLocks is set during CLOGShmemInit and does not change thereafter.
+ * The value is automatically inherited by backends via fork, and
+ * doesn't need to be in shared memory.
+ */
+ LWLockId BufferLocks[NUM_CLOG_BUFFERS]; /* Per-buffer I/O locks */
+} SlruLockData;
+typedef SlruLockData *SlruLock;
+
+typedef struct SlruCtlData
+{
+ void *shared; /* pointer to SlruSharedData */
+ SlruLock locks;
+
+/*
+ * Dir is set during SimpleLruShmemInit and does not change thereafter.
+ * The value is automatically inherited by backends via fork, and
+ * doesn't need to be in shared memory.
+ */
+ char Dir[MAXPGPATH];
+
+/*
+ * Decide which of two page numbers is "older" for truncation purposes.
+ * We need to use comparison of TransactionIds here in order to do the right
+ * thing with wraparound XID arithmetic.
+ */
+ bool (*PagePrecedes)(int, int);
+
+} SlruCtlData;
+typedef SlruCtlData *SlruCtl;
+
+extern int SimpleLruShmemSize(void);
+extern void SimpleLruInit(SlruCtl ctl, const char *name, const char *subdir);
+extern int SimpleLruZeroPage(SlruCtl ctl, int pageno);
+extern char *SimpleLruReadPage(SlruCtl ctl, int pageno, TransactionId xid, bool forwrite);
+extern void SimpleLruWritePage(SlruCtl ctl, int slotno);
+extern void SimpleLruSetLatestPage(SlruCtl ctl, int pageno);
+extern void SimpleLruFlush(SlruCtl ctl, bool checkpoint);
+extern void SimpleLruTruncate(SlruCtl ctl, int cutoffPage);
+
+#endif /* SLRU_H */
* Portions Copyright (c) 1996-2002, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
- * $Id: lwlock.h,v 1.6 2002/06/20 20:29:52 momjian Exp $
+ * $Id: lwlock.h,v 1.7 2003/06/11 22:37:46 momjian Exp $
*
*-------------------------------------------------------------------------
*/
WALWriteLock,
ControlFileLock,
CheckpointLock,
- CLogControlLock,
RelCacheInitLock,
NumFixedLWLocks, /* must be last except for
projects / postgresql.git / commitdiff