Commits
fdd965d07 and
3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.
1635277318@sss.pgh.pa.us
use PostgreSQL::Test::Cluster;
use PostgreSQL::Test::Utils;
-use Test::More tests => 4;
+use Test::More tests => 3;
my ($node, $result);
$node->safe_psql('postgres', q(CREATE INDEX idx ON tbl(i)));
#
-# Stress CIC with pgbench
+# Stress CIC with pgbench.
+#
+# pgbench might try to launch more than one instance of the CIC
+# transaction concurrently. That would deadlock, so use an advisory
+# lock to ensure only one CIC runs at a time.
#
-
-# Run background pgbench with CIC. We cannot mix-in this script into single
-# pgbench: CIC will deadlock with itself occasionally.
-my $pgbench_out = '';
-my $pgbench_timer = IPC::Run::timeout(180);
-my $pgbench_h = $node->background_pgbench(
- '--no-vacuum --client=1 --transactions=200',
- {
- '002_pgbench_concurrent_cic' => q(
- DROP INDEX CONCURRENTLY idx;
- CREATE INDEX CONCURRENTLY idx ON tbl(i);
- SELECT bt_index_check('idx',true);
- )
- },
- \$pgbench_out,
- $pgbench_timer);
-
-# Run pgbench.
$node->pgbench(
- '--no-vacuum --client=5 --transactions=200',
+ '--no-vacuum --client=5 --transactions=100',
0,
[qr{actually processed}],
[qr{^$}],
- 'concurrent INSERTs',
+ 'concurrent INSERTs and CIC',
{
'002_pgbench_concurrent_transaction' => q(
BEGIN;
SAVEPOINT s1;
INSERT INTO tbl VALUES(0);
COMMIT;
+ ),
+ '002_pgbench_concurrent_cic' => q(
+ SELECT pg_try_advisory_lock(42)::integer AS gotlock \gset
+ \if :gotlock
+ DROP INDEX CONCURRENTLY idx;
+ CREATE INDEX CONCURRENTLY idx ON tbl(i);
+ SELECT bt_index_check('idx',true);
+ SELECT pg_advisory_unlock(42);
+ \endif
)
});
-$pgbench_h->pump_nb;
-$pgbench_h->finish();
-$result =
- ($Config{osname} eq "MSWin32")
- ? ($pgbench_h->full_results)[0]
- : $pgbench_h->result(0);
-is($result, 0, "pgbench with CIC works");
-
-# done
$node->stop;
done_testing();
use PostgreSQL::Test::Cluster;
use PostgreSQL::Test::Utils;
-use Test::More tests => 6;
+use Test::More tests => 5;
my ($node, $result);
#
# Stress CIC+2PC with pgbench
#
+# pgbench might try to launch more than one instance of the CIC
+# transaction concurrently. That would deadlock, so use an advisory
+# lock to ensure only one CIC runs at a time.
# Fix broken index first
$node->safe_psql('postgres', q(REINDEX TABLE tbl;));
-# Run background pgbench with CIC. We cannot mix-in this script into single
-# pgbench: CIC will deadlock with itself occasionally.
-my $pgbench_out = '';
-my $pgbench_timer = IPC::Run::timeout(180);
-my $pgbench_h = $node->background_pgbench(
- '--no-vacuum --client=1 --transactions=100',
- {
- '002_pgbench_concurrent_cic' => q(
- DROP INDEX CONCURRENTLY idx;
- CREATE INDEX CONCURRENTLY idx ON tbl(i);
- SELECT bt_index_check('idx',true);
- )
- },
- \$pgbench_out,
- $pgbench_timer);
-
# Run pgbench.
$node->pgbench(
'--no-vacuum --client=5 --transactions=100',
0,
[qr{actually processed}],
[qr{^$}],
- 'concurrent INSERTs w/ 2PC',
+ 'concurrent INSERTs w/ 2PC and CIC',
{
- '002_pgbench_concurrent_2pc' => q(
+ '003_pgbench_concurrent_2pc' => q(
BEGIN;
INSERT INTO tbl VALUES(0);
PREPARE TRANSACTION 'c:client_id';
COMMIT PREPARED 'c:client_id';
),
- '002_pgbench_concurrent_2pc_savepoint' => q(
+ '003_pgbench_concurrent_2pc_savepoint' => q(
BEGIN;
SAVEPOINT s1;
INSERT INTO tbl VALUES(0);
PREPARE TRANSACTION 'c:client_id';
COMMIT PREPARED 'c:client_id';
+ ),
+ '003_pgbench_concurrent_cic' => q(
+ SELECT pg_try_advisory_lock(42)::integer AS gotlock \gset
+ \if :gotlock
+ DROP INDEX CONCURRENTLY idx;
+ CREATE INDEX CONCURRENTLY idx ON tbl(i);
+ SELECT bt_index_check('idx',true);
+ SELECT pg_advisory_unlock(42);
+ \endif
+ ),
+ '004_pgbench_concurrent_ric' => q(
+ SELECT pg_try_advisory_lock(42)::integer AS gotlock \gset
+ \if :gotlock
+ REINDEX INDEX CONCURRENTLY idx;
+ SELECT bt_index_check('idx',true);
+ SELECT pg_advisory_unlock(42);
+ \endif
)
});
-$pgbench_h->pump_nb;
-$pgbench_h->finish();
-$result =
- ($Config{osname} eq "MSWin32")
- ? ($pgbench_h->full_results)[0]
- : $pgbench_h->result(0);
-is($result, 0, "pgbench with CIC works");
-
-# done
$node->stop;
done_testing();
=pod
-=item $node->background_pgbench($opts, $files, \$stdout, $timer) => harness
-
-Invoke B<pgbench> and return an IPC::Run harness object. The process's stdin
-is empty, and its stdout and stderr go to the $stdout scalar reference. This
-allows the caller to act on other parts of the system while B<pgbench> is
-running. Errors from B<pgbench> are the caller's problem.
-
-The specified timer object is attached to the harness, as well. It's caller's
-responsibility to select the timeout length, and to restart the timer after
-each command if the timeout is per-command.
-
-Be sure to "finish" the harness when done with it.
-
-=over
-
-=item $opts
-
-Options as a string to be split on spaces.
-
-=item $files
-
-Reference to filename/contents dictionary.
-
-=back
-
-=cut
-
-sub background_pgbench
-{
- my ($self, $opts, $files, $stdout, $timer) = @_;
-
- my @cmd =
- ('pgbench', split(/\s+/, $opts), $self->_pgbench_make_files($files));
-
- local %ENV = $self->_get_env();
-
- my $stdin = "";
- # IPC::Run would otherwise append to existing contents:
- $$stdout = "" if ref($stdout);
-
- my $harness = IPC::Run::start \@cmd, '<', \$stdin, '>', $stdout, '2>&1',
- $timer;
-
- return $harness;
-}
-
-=pod
-
=item $node->connect_ok($connstr, $test_name, %params)
Attempt a connection with a custom connection string. This is expected
projects / users / rhaas / postgres.git / commitdiff