| Age | Commit message (Collapse) | Author |
|---|
|
I committed this contrib module just after Tom committed
55527368bd07248e91e3d37a782bf66b76f06865; adjust it to match.
Author: Man Zeng <zengman@halodbtech.com>
Discussion: http://postgr.es/m/174313513707.60295.16516085012903412705.pgcf@coridan.postgresql.org
|
|
It makes no sense to remember the previous values of the hook variables
and then never bother calling those functions. Thanks to Andrei for
spotting my goof.
Author: Andrei Lepikhov <lepihov@gmail.com>
Discussion: http://postgr.es/m/41a344e3-ffb1-4296-8ba7-801f1e9642e5@gmail.com
|
|
Instead of directly invoking ReadBuffer() for each unskippable block in
the heap relation, verify_heapam() now uses the read stream API to
acquire the next buffer to check for corruption.
Author: Matheus Alcantara <matheusssilv97@gmail.com>
Co-authored-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/flat/CAFY6G8eLyz7%2BsccegZYFj%3D5tAUR-GZ9uEq4Ch5gvwKqUwb_hCA%40mail.gmail.com
|
|
Applying pg_freespacemap() to a relation lacking storage (such as a
view) caused an assertion failure, although there was no ill effect
in non-assert builds. Add an error check for that case.
Bug: #18866
Reported-by: Robins Tharakan <tharakan@gmail.com>
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/18866-d68926d0f1c72d44@postgresql.org
Backpatch-through: 13
|
|
Per buildfarm, these are not stable. In particular, 1/8 is sometimes
0.12 and sometimes 0.13.
|
|
Commit 62d712ecfd94 introduced the capability to calculate the same
queryId for queries with different lengths of constants in a list for an
IN clause. This behavior was originally enabled with a GUC
query_id_squash_values. After a discussion about the value of such a
GUC, it was decided to back out of the use of a GUC and make the
squashing behavior the only available option.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z-LZyygkkNyA8-kR@msg.df7cb.de
Discussion: https://postgr.es/m/CA+q6zcVTK-3C-8NWV1oY2NZrvtnMCDqnyYYyk1T7WMUG65MeOQ@mail.gmail.com
|
|
Previously NULL nodes were ignored. This could cause issues where the
computed query ID could match for queries where fields that are next to
each other in their Node struct where one field was NULL and the other
non-NULL. For example, the Query struct had distinctClause and sortClause
next to each other. If someone wrote;
SELECT DISTINCT c1 FROM t;
and then;
SELECT c1 FROM t ORDER BY c1;
these would produce the same query ID since, in the first query, we
ignored the NULL sortClause and appended the jumble bytes for the
distictClause. In the latter query, since we did nothing for the NULL
distinctClause then jumble the non-NULL sortClause, and since the node
representation stored is the same in both cases, the query IDs were
identical.
Here we fix this by always accounting for NULL nodes by recording that
we saw a NULL in the jumble buffer. This fixes the issue as the order that
the NULL is recorded isn't the same in the above two queries.
Author: Bykov Ivan <i.bykov@modernsys.ru>
Author: Michael Paquier <michael@paquier.xyz>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/aafce7966e234372b2ba876c0193f1e9%40localhost.localdomain
|
|
Per buildfarm.
|
|
It added bogus whitespace at the end of a line in the documentation.
It should not have done that.
The pg_overexplain tests must SET debug_parallel_query = false,
not just RESET debug_parallel_query, or we get failures on test
machines that make debug_parallel_query = true the defualt.
|
|
There's a fair amount of information in the Plan and PlanState trees
that isn't printed by any existing EXPLAIN option. This means that,
when working on the planner, it's often necessary to rely on facilities
such as debug_print_plan, which produce excessively voluminous
output. Hence, use the new EXPLAIN extension facilities to implement
EXPLAIN (DEBUG) and EXPLAIN (RANGE_TABLE) as extensions to the core
EXPLAIN facility.
A great deal more could be done here, and the specific choices about
what to print and how are definitely arguable, but this is at least
a starting point for discussion and a jumping-off point for possible
future improvements.
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviweed-by: Andrei Lepikhov <lepihov@gmail.com> (who didn't like it)
Discussion: http://postgr.es/m/CA+TgmoZfvQUBWQ2P8iO30jywhfEAKyNzMZSR+uc2xr9PZBw6eQ@mail.gmail.com
|
|
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
|
|
This macro allows dynamically loaded shared libraries (modules) to
provide a wired-in module name and version, and possibly other
compile-time-constant fields in future. This information can be
retrieved with the new pg_get_loaded_modules() function.
This feature is expected to be particularly useful for modules
that do not have any exposed SQL functionality and thus are
not associated with a SQL-level extension object. But even for
modules that do belong to extensions, being able to verify the
actual code version can be useful.
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Yurii Rashkovskii <yrashk@omnigres.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
|
|
Due to a conflict in macro names on Windows between <wincrypt.h>
and <openssl/ssl.h> these headers need to be included using a
predictable pattern with an undef to handle that. The GSSAPI
header <gssapi.h> does include <wincrypt.h> which cause problems
with compiling PostgreSQL using MSVC when OpenSSL and GSSAPI are
both enabled in the tree. Rather than fixing piecemeal for each
file including gssapi headers, move the the includes and undef
to a new file which should be used to centralize the logic.
This patch is a reworked version of a patch by Imran Zaheer
proposed earlier in the thread. Once this has proven effective
in master we should look at backporting this as the problem
exist at least since v16.
Author: Daniel Gustafsson <daniel@yesql.se>
Co-authored-by: Imran Zaheer <imran.zhir@gmail.com>
Reported-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/20240708173204.3f3xjilglx5wuzx6@awork3.anarazel.de
|
|
This enables SCRAM authentication for dblink (using dblink_fdw) when
connecting to a foreign server without having to store a plain-text
password on user mapping options
This uses the same approach as it was implemented for postgres_fdw in
commit 761c79508e7. (It also contains the equivalent of the
subsequent fixes 76563f88cfb and d2028e9bbc1.)
Author: Matheus Alcantara <mths.dev@pm.me>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAFY6G8ercA1KES%3DE_0__R9QCTR805TTyYr1No8qF8ZxmMg8z2Q%40mail.gmail.com
|
|
custom_query_jumble (introduced in 5ac462e2b7ac as a node field
attribute) is now assigned to the expanded reference name "eref" of
RangeTblEntry, adding in the query jumble computation the non-qualified
aliased relation name, without the list of column names. The relation
OID is removed from the query jumbling.
The effects of this change can be seen in the tests added by
3430215fe35f, where pg_stat_statements (PGSS) entries are now grouped
using the relation name, ignoring the relation search_path may point at.
For example, these two relations are different, but are now grouped in a
single PGSS entry as they are assigned the same query ID:
CREATE TABLE foo1.tab (a int);
CREATE TABLE foo2.tab (b int);
SET search_path = 'foo1';
SELECT count(*) FROM tab;
SET search_path = 'foo2';
SELECT count(*) FROM tab;
SELECT count(*) FROM foo1.tab;
SELECT count(*) FROM foo2.tab;
SELECT query, calls FROM pg_stat_statements WHERE query ~ 'FROM tab';
query | calls
--------------------------+-------
SELECT count(*) FROM tab | 4
(1 row)
It is still possible to use an alias in the FROM clause to split these.
This behavior is useful for relations re-created with the same name,
where queries based on such relations would be grouped in the same
PGSS entry. For permanent schemas, it should not really matter in
practice. The main benefit is for workloads that use a lot of temporary
relations, which are usually re-created with the same name continuously.
These can be a heavy source of bloat in PGSS depending on the workload.
Such entries can now be grouped together, improving the user experience.
The original idea from Christoph Berg used catalog lookups to find
temporary relations, something that the query jumble has never done, and
it could cause some performance regressions. The idea to use
RangeTblEntry.eref and the relation name, applying the same rules for
all relations, temporary and not temporary, has been proposed by Tom
Lane. The documentation additions have been suggested by Sami Imseih.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Lukas Fittl <lukas@fittl.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/Z9iWXKGwkm8RAC93@msg.df7cb.de
|
|
The tests introduced by commit 76563f88cfb only work when Unix-domain
sockets are available. This is optional on Windows, and buildfarm
member drongo runs without them. To fix, skip the test if Unix-domain
sockets are not enabled.
|
|
These tests provide coverage for RangeTblEntry and how query jumbling
works with search_path, as well as the case where relations are
re-created, generating a different query ID as the relation OID is used
in the computation.
A patch is under discussion to switch to a different approach based on
the relation name, and there was no test coverage for this area,
including how queries are currently grouped with search_path. This is
useful to track how the situation changes between HEAD and any patches
proposed.
Christoph has proposed the test with ON COMMIT DROP temporary tables,
and I have written the second part.
Author: Christoph Berg <myon@debian.org>
Author: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z9iWXKGwkm8RAC93@msg.df7cb.de
|
|
If a var belongs to the innerrel of the joinrel, it's not possible that
it belongs to the outerrel. This commit removes the redundant check from
the if-clause but keeps it as an assertion.
Discussion: https://postgr.es/m/flat/CAHewXN=8aW4hd_W71F7Ua4+_w0=bppuvvTEBFBF6G0NuSXLwUw@mail.gmail.com
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Alexander Pyhalov <a.yhalov@postgrespro.ru>
Backpatch-through: 17
|
|
Semi-join joins below left/right join are deparsed as
subqueries. Thus, we can't refer to subqueries vars from upper relations.
This commit avoids pulling conditions from them.
Reported-by: Robins Tharakan <tharakan@gmail.com>
Bug: #18852
Discussion: https://postgr.es/m/CAEP4nAzryLd3gwcUpFBAG9MWyDfMRX8ZjuyY2XXjyC_C6k%2B_Zw%40mail.gmail.com
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Backpatch-through: 17
|
|
SCRAM pass-through should not bypass the FDW security check as it was
implemented for postgres_fdw in commit 761c79508e7.
This commit improves the security check by adding new SCRAM
pass-through checks to ensure that the required SCRAM connection
options are not overwritten by the user mapping or foreign server
options. This is meant to match the security requirements for a
password-using connection.
Since libpq has no SCRAM-specific equivalent of
PQconnectionUsedPassword(), we enforce this instead by making the
use_scram_passthrough option of postgres_fdw imply
require_auth=scram-sha-256. This means that if use_scram_passthrough
is set, some situations that might otherwise have worked are
preempted, for example GSSAPI with delegated credentials. This could
be enhanced in the future if there is desire for more flexibility.
Reported-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Matheus Alcantara <mths.dev@pm.me>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAFY6G8ercA1KES%3DE_0__R9QCTR805TTyYr1No8qF8ZxmMg8z2Q%40mail.gmail.com
|
|
We have collected several instances of a workaround for GCC bug 53119,
which caused false-positive compiler warnings. This bug has long been
fixed, but was still seen on the buildfarm, most recently on lapwing
with gcc (Debian 4.7.2-5). (The GCC bug tracker mentions that a fix
was backported to 4.7.4 and 4.8.3.)
That compiler no longer runs warning-free since commit 6fdd5d95634, so
we don't need to keep these workarounds. And furthermore, the
consensus appears to be that we don't want to keep supporting that era
of platform anymore at all.
This reverts the following commits:
d937904cce6a3d82e4f9c2127de7b59105a134b3
506428d091760650971433f6bc083531c307b368
b449afb582bb9015bfbb85abc10ce122aef9ec70
6392f2a0968c20ecde4d27b6652703ad931fce92
bad0763a4d7be3005eae35d460c73ac4bc7ebaad
5e0c761d0a13c7b4f7c5de618ac38560d74d74d0
and makes a few similar fixes to newer code.
Discussion: https://www.postgresql.org/message-id/flat/e170d61f-01ab-4cf9-ab68-91cd1fac62c5%40eisentraut.org
Discussion: https://www.postgresql.org/message-id/flat/CA%2BTgmoYEAm-KKZibAP3hSqbTFTjUd47XtVcf3xSFDpyecXX9uQ%40mail.gmail.com
|
|
pg_stat_statements produces multiple entries for queries like
SELECT something FROM table WHERE col IN (1, 2, 3, ...)
depending on the number of parameters, because every element of
ArrayExpr is individually jumbled. Most of the time that's undesirable,
especially if the list becomes too large.
Fix this by introducing a new GUC query_id_squash_values which modifies
the node jumbling code to only consider the first and last element of a
list of constants, rather than each list element individually. This
affects both the query_id generated by query jumbling, as well as
pg_stat_statements query normalization so that it suppresses printing of
the individual elements of such a list.
The default value is off, meaning the previous behavior is maintained.
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Sergey Dudoladov (mysterious, off-list)
Reviewed-by: David Geier <geidav.pg@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Sutou Kouhei <kou@clear-code.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Marcos Pegoraro <marcos@f10.com.br>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Tested-by: Yasuo Honda <yasuo.honda@gmail.com>
Tested-by: Sergei Kornilov <sk@zsrv.org>
Tested-by: Maciek Sakrejda <m.sakrejda@gmail.com>
Tested-by: Chengxi Sun <sunchengxi@highgo.com>
Tested-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CA+q6zcWtUbT_Sxj0V6HY6EZ89uv5wuG5aefpe_9n0Jr3VwntFg@mail.gmail.com
|
|
Modules can use RegisterExtensionExplainOption to register new
EXPLAIN options, and GetExplainExtensionId, GetExplainExtensionState,
and SetExplainExtensionState to store related state inside the
ExplainState object.
Since this substantially increases the amount of code that needs
to handle ExplainState-related tasks, move a few bits of existing
code to a new file explain_state.c and add the rest of this
infrastructure there.
See the comments at the top of explain_state.c for further
explanation of how this mechanism works.
This does not yet provide a way for such such options to do anything
useful. The intention is that we'll add hooks for that purpose in a
separate commit.
Discussion: http://postgr.es/m/CA+TgmoYSzg58hPuBmei46o8D3SKX+SZoO4K_aGQGwiRzvRApLg@mail.gmail.com
Reviewed-by: Srinath Reddy <srinath2133@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
|
|
This commit addresses some inconsistencies with how the options of some
routines from PostgreSQL/Test/ are written, mainly for init() and
init_from_backup() in Cluster.pm. These are written as unquoted, except
in the locations updated here.
Changes extracted from a larger patch by the same author.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87jz8rzf3h.fsf@wibble.ilmari.org
|
|
This commit reshapes the grammar of some commands to apply a more
consistent style across the board, following rules similar to
ce1b0f9da03e:
- Elimination of some pointless used-once variables.
- Use of long options, to self-document better the options used.
- Use of fat commas to link option names and their assigned values,
including redirections, so as perltidy can be tricked to put them
together.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87jz8rzf3h.fsf@wibble.ilmari.org
|
|
isn's weak mode used to be a simple static variable, settable only
via the isn_weak(boolean) function. This wasn't optimal, as this
means it doesn't respect transactions nor respond to RESET ALL.
This patch makes isn.weak a GUC parameter instead, so that
it acts like any other user-settable parameter.
The isn_weak() functions are retained for backwards compatibility.
But we must fix their volatility markings: they were marked IMMUTABLE
which is surely incorrect, and PARALLEL RESTRICTED which isn't right
for GUC-related functions either. Mark isn_weak(boolean) as
VOLATILE and PARALLEL UNSAFE, matching set_config(). Mark isn_weak()
as STABLE and PARALLEL SAFE, matching current_setting().
Reported-by: Viktor Holmberg <v@viktorh.net>
Diagnosed-by: Daniel Gustafsson <daniel@yesql.se>
Author: Viktor Holmberg <v@viktorh.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/790bc1f9-74dc-4b50-94d2-8147315b1556@Spark
|
|
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
|
|
Introduced recently by 9e088f7dd
Per buildfarm member koel
|
|
Oversight in bd65cb3cd48.
Reported-by: David Rowley <dgrowleyml@gmail.com>
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvqrhFfnetbcwgGkJ=z63T8HfQ_OyP=vX8BYiXyxFKt67w@mail.gmail.com
|
|
Previously, pg_logicalinspect functions were too trusting of their
input and blindly passed it to SnapBuildRestoreSnapshot(). If the
input pointed to a directory, the server could a PANIC error while
attempting to fsync_fname() with isdir=false on a directory.
This commit adds validation checks for input filenames and passes the
LSN extracted from the filename to SnapBuildRestoreSnapshot() instead
of the filename itself. It also adds regression tests for various
input patterns and permission checks.
Bug: #18828
Reported-by: Robins Tharakan <tharakan@gmail.com>
Co-authored-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/18828-0f4701c635064211@postgresql.org
|
|
The previous isolation tests did not account for the possibility that
the background writer or the checkpointer could write a RUNNING_XACTS
record, which could cause logical decoding to produce more logical
snapshots than expected.
This commit modifies the isolation tests to verify that at least one
logical snapshot contains the expected number of committed or ongoing
catalog-change transactions.
Per buildfarm member skink.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/5qbxud4pvnvmtuoi7weiizm5hmumxaeohx4vztfhrwlfhyz6rj@buh4435mllwo
|
|
Up to now we just punted on showing the window definitions used
in a plan, with window function calls represented as "OVER (?)".
To improve that, show the window definition implemented by each
WindowAgg plan node, and reference their window names in OVER.
For nameless window clauses generated by "OVER (...)", assign
unique names w1, w2, etc.
In passing, re-order the properties shown for a WindowAgg node
so that the Run Condition (if any) appears after the Window
property and before the Filter (if any). This seems more
sensible since the Run Condition is associated with the Window
and acts before the Filter.
Thanks to David G. Johnston and Álvaro Herrera for design
suggestions.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/144530.1741469955@sss.pgh.pa.us
|
|
Make nbtree's "1/3 of a page limit" BTMaxItemSize function-like macro
(which accepts a "page" argument) into an object-like macro that can be
used from code that doesn't have convenient access to an nbtree page.
Preparation for an upcoming patch that adds skip scan to nbtree.
Parallel index scans that use skip scan will serialize datums (not just
SAOP array subscripts) when scheduling primitive scans. BTMaxItemSize
will be used by btestimateparallelscan to determine how much DSM to
request.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=H_RG5weNGeUG_TkK87tRBnH9mGCQj6WpM4V4FNWKv2g@mail.gmail.com
|
|
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan/index-only scan/bitmap index scan nodes. This
information is particularly useful with scans that use ScalarArrayOp
quals, where the number of index searches can be unpredictable due to
implementation details that interact with physical index characteristics
(at least with nbtree SAOP scans, since Postgres 17 commit 5bf748b8).
The information shown also provides useful context when EXPLAIN ANALYZE
runs a plan with an index scan node that successfully applied the skip
scan optimization (set to be added to nbtree by an upcoming patch).
The instrumentation works by teaching all index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs already increment
the pg_stat_*_indexes.idx_scan counter (we're counting the same event,
but at the scan level rather than the relation level). Parallel queries
have workers copy their local counter struct into shared memory when an
index scan node ends -- even when it isn't a parallel aware scan node.
An earlier version of this patch that only worked with parallel aware
scans became commit 5ead85fb (though that was quickly reverted by commit
d00107cd following "debug_parallel_query=regress" buildfarm failures).
Our approach doesn't match the approach used when tracking other index
scan related costs (e.g., "Rows Removed by Filter:"). It is comparable
to the approach used in similar cases involving costs that are only
readily accessible inside an access method, not from the executor proper
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan, which was recently
enhanced to show per-worker costs by commit 5a1e6df3, using essentially
the same scheme as the one used here). It is necessary for index AMs to
have direct responsibility for maintaining the new counter, since the
counter might need to be incremented multiple times per amgettuple call
(or per amgetbitmap call). But it is also necessary for the executor
proper to manage the shared memory now used to transfer each worker's
counter struct to the leader.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
|
|
After more discussion about commit ce62f2f2a0a, rename the index AM
property amcancrosscompare to two separate properties
amconsistentequality and amconsistentordering. Also improve the
documentation and update some comments that were previously missed.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/E1tngY6-0000UL-2n%40gemulon.postgresql.org
|
|
This reverts commit 5ead85fbc81162ab1594f656b036a22e814f96b3.
This commit shows test failures with debug_parallel_query=regress. The
underlying issue needs to be debugged, so revert for now.
|
|
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan nodes. This information is particularly useful
with scans that use ScalarArrayOp quals, where the number of index scans
isn't predictable in advance (at least not with optimizations like the
one added to nbtree by Postgres 17 commit 5bf748b8). It will also be
useful when EXPLAIN ANALYZE shows details of an nbtree index scan that
uses skip scan optimizations set to be introduced by an upcoming patch.
The instrumentation works by teaching index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs must already
increment the index's pg_stat_*_indexes.idx_scan counter (we're counting
the same event, but at the scan level rather than the relation level).
The new counter is stored in the scan descriptor (IndexScanDescData),
which explain.c reaches by going through the scan node's PlanState.
This approach doesn't match the approach used when tracking other index
scan specific costs (e.g., "Rows Removed by Filter:"). It is similar to
the approach used in other cases where we must track costs that are only
readily accessible inside an access method, and not from the executor
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan). It is inherently
necessary to maintain a counter that can be incremented multiple times
during a single amgettuple call (or amgetbitmap call), and directly
exposing PlanState.instrument to index access methods seems unappealing.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
|
|
This commit adds a new "remote_backend_pid" output column to
the postgres_fdw_get_connections function. It returns the process ID of
the remote backend, on the foreign server, handling the connection.
This enhancement is useful for troubleshooting, monitoring, and reporting.
For example, if a connection is unexpectedly closed by the foreign server,
the remote backend's PID can help diagnose the cause.
No extension version bump is needed, as commit c297a47c5f already
handled it for v18~.
Author: Sagar Dilip Shedge <sagar.shedge92@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAPhYifF25q5xUQWXETfKwhc0YVa_6+tfG9Kw4bCvCjpCWxYs2A@mail.gmail.com
|
|
This commit adjusts auto_explain's GUC descriptions to follow the
style guidelines established by commit 977d865c36. Specifically,
it ensures the accepted special values are listed in a consistent
manner.
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/e82d4647-ce7f-45c7-9b01-fb900a050767%40tantorlabs.com
|
|
explain.c has grown rather large, so move various functions that
are principally concerned with output generation to a new source
file, explain_format.c, instead of lumping them in with everything
else that is part of explain.c
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: http://postgr.es/m/CA+TgmoYutMw1Jgo8BWUmB3TqnOhsEAJiYO=rOQufF4gPLWmkLQ@mail.gmail.com
|
|
Commit ddb17e387aa28d61521227377b00f997756b8a27 attempted to avoid
confusing users by displaying digits after the decimal point only when
nloops > 1, since it's impossible to have a fraction row count after a
single iteration. However, this made the regression tests unstable since
parallal queries will have nloops>1 for all nodes below the Gather or
Gather Merge in normal cases, but if the workers don't start in time and
the leader finishes all the work, they will suddenly have nloops==1,
making it unpredictable whether the digits after the decimal point would
be displayed or not. Although 44cbba9a7f51a3888d5087fc94b23614ba2b81f2
seemed to fix the immediate failures, it may still be the case that there
are lower-probability failures elsewhere in the regression tests.
Various fixes are possible here. For example, it has previously been
proposed that we should try to display the digits after the decimal
point only if rows/nloops is an integer, but currently rows is storead
as a float so it's not theoretically an exact quantity -- precision
could be lost in extreme cases. It has also been proposed that we
should try to display the digits after the decimal point only if we're
under some sort of construct that could potentially cause looping
regardless of whether it actually does. While such ideas are not
without merit, this patch adopts the much simpler solution of always
display two decimal digits. If that approach stands up to scrutiny
from the buildfarm and human users, it spares us the trouble of doing
anything more complex; if not, we can reassess.
This commit incidentally reverts 44cbba9a7f51a3888d5087fc94b23614ba2b81f2,
which should no longer be needed.
Author: Robert Haas <robertmhaas@gmail.com>
Author: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Discussion: http://postgr.es/m/CA+TgmoazzVHn8sFOMFAEwoqBTDxKT45D7mvkyeHgqtoD2cn58Q@mail.gmail.com
|
|
Stop comparing access method OID values against HASH_AM_OID and
BTREE_AM_OID, and instead check the IndexAmRoutine for an index to see
if it advertises its ability to perform the necessary ordering,
hashing, or cross-type comparing functionality. A field amcanorder
already existed, this uses it more widely. Fields amcanhash and
amcancrosscompare are added for the other purposes.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
|
|
different architectures.
GIN and GiST indexes utilizing pg_trgm's opclasses store sorted
trigrams within index tuples. When comparing and sorting each trigram,
pg_trgm treats each character as a 'char[3]' type in C. However, the
char type in C can be interpreted as either signed char or unsigned
char, depending on the platform, if the signedness is not explicitly
specified. Consequently, during replication between different CPU
architectures, there was an issue where index scans on standby servers
could not locate matching index tuples due to the differing treatment
of character signedness.
This change introduces comparison functions for trgm that explicitly
handle signed char and unsigned char. The appropriate comparison
function will be dynamically selected based on the character
signedness stored in the control file. Therefore, upgraded clusters
can utilize the indexes without rebuilding, provided the cluster
upgrade occurs on platforms with the same character signedness as the
original cluster initialization.
The default char signedness information was introduced in 44fe30fdab6,
so no backpatch.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
|
|
The type argument wasn't actually really necessary. It was a remnant
of converting the API of the gist strategy translation from using
opclass to using opfamily+opcintype (commits c09e5a6a016,
622f678c102). For looking up the gist translation function, we used
the convention "amproclefttype = amprocrighttype = opclass's
opcintype" (see pg_amproc.h). But each operator family should only
have one translation function, and getting the right type for the
lookup is sometimes cumbersome and fragile, so this is all
unnecessarily complicated.
To simplify this, change the gist stategy support procedure to take
"any", "any" as argument. (This is arbitrary but seems intuitive.
The alternative of using InvalidOid as argument(s) upsets various DDL
commands, so it's not practical.) Then we don't need opcintype for
the lookup, and we can remove it from all the API layers introduced by
commit c09e5a6a016.
This also adds some more documentation about the correct signature of
the gist support function and adds more checks in gistvalidate().
This was previously underspecified. (It relied implicitly on
convention mentioned above.)
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
|
|
Remove a number of (char *) casts that are unnecessary. Or in some
cases, rewrite the code to make the purpose of the cast clearer.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
|
Before executing a cached generic plan, AcquireExecutorLocks() in
plancache.c locks all relations in a plan's range table to ensure the
plan is safe for execution. However, this locks runtime-prunable
relations that will later be pruned during "initial" runtime pruning,
introducing unnecessary overhead.
This commit defers locking for such relations to executor startup and
ensures that if the CachedPlan is invalidated due to concurrent DDL
during this window, replanning is triggered. Deferring these locks
avoids unnecessary locking overhead for pruned partitions, resulting
in significant speedup, particularly when many partitions are pruned
during initial runtime pruning.
* Changes to locking when executing generic plans:
AcquireExecutorLocks() now locks only unprunable relations, that is,
those found in PlannedStmt.unprunableRelids (introduced in commit
cbc127917e), to avoid locking runtime-prunable partitions
unnecessarily. The remaining locks are taken by
ExecDoInitialPruning(), which acquires them only for partitions that
survive pruning.
This deferral does not affect the locks required for permission
checking in InitPlan(), which takes place before initial pruning.
ExecCheckPermissions() now includes an Assert to verify that all
relations undergoing permission checks, none of which can be in the
set of runtime-prunable relations, are properly locked.
* Plan invalidation handling:
Deferring locks introduces a window where prunable relations may be
altered by concurrent DDL, invalidating the plan. A new function,
ExecutorStartCachedPlan(), wraps ExecutorStart() to detect and handle
invalidation caused by deferred locking. If invalidation occurs,
ExecutorStartCachedPlan() updates CachedPlan using the new
UpdateCachedPlan() function and retries execution with the updated
plan. To ensure all code paths that may be affected by this handle
invalidation properly, all callers of ExecutorStart that may execute a
PlannedStmt from a CachedPlan have been updated to use
ExecutorStartCachedPlan() instead.
UpdateCachedPlan() replaces stale plans in CachedPlan.stmt_list. A new
CachedPlan.stmt_context, created as a child of CachedPlan.context,
allows freeing old PlannedStmts while preserving the CachedPlan
structure and its statement list. This ensures that loops over
statements in upstream callers of ExecutorStartCachedPlan() remain
intact.
ExecutorStart() and ExecutorStart_hook implementations now return a
boolean value indicating whether plan initialization succeeded with a
valid PlanState tree in QueryDesc.planstate, or false otherwise, in
which case QueryDesc.planstate is NULL. Hook implementations are
required to call standard_ExecutorStart() at the beginning, and if it
returns false, they should do the same without proceeding.
* Testing:
To verify these changes, the delay_execution module tests scenarios
where cached plans become invalid due to changes in prunable relations
after deferred locks.
* Note to extension authors:
ExecutorStart_hook implementations must verify plan validity after
calling standard_ExecutorStart(), as explained earlier. For example:
if (prev_ExecutorStart)
plan_valid = prev_ExecutorStart(queryDesc, eflags);
else
plan_valid = standard_ExecutorStart(queryDesc, eflags);
if (!plan_valid)
return false;
<extension-code>
return true;
Extensions accessing child relations, especially prunable partitions,
via ExecGetRangeTableRelation() must now ensure their RT indexes are
present in es_unpruned_relids (introduced in commit cbc127917e), or
they will encounter an error. This is a strict requirement after this
change, as only relations in that set are locked.
The idea of deferring some locks to executor startup, allowing locks
for prunable partitions to be skipped, was first proposed by Tom Lane.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: David Rowley <dgrowleyml@gmail.com> (earlier versions)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
|
|
There is at least one report in the field of storing millions of
integers in arrays, so it seems like a good time to specialize
intarray's qsort function. In doing so, streamline the comparators:
Previously there were three, two for each direction for sorting
and one passed to qunique_arg. To preserve the early exit in the
case of descending input, pass the direction as an argument to
the comparator. This requires giving up duplicate detection, which
previously allowed skipping the qunique_arg() call. Testing showed
no regressions this way.
In passing, get rid of nearby checks that the input has at least
two elements, since preserving them would make some macros less
readable. These are not necessary for correctness, and seem like
premature optimizations.
Author: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/098A3E67-E4A6-4086-9C66-B1EAEB1DFE1C@yandex-team.ru
|
|
wal_buffers_full tracks the number of times WAL buffers become full,
giving hints to be able to tune the GUC wal_buffers.
Up to now, this information was only available in pg_stat_wal. With
this field available in WalUsage since eaf502747bac, exposing it in
pg_stat_statements is straight-forward, and it offers more granularity
at query level.
pg_stat_statements does not need a version bump as one has been done in
commit cf54a2c00254 for this development cycle.
Author: Bertrand Drouvot
Reviewed-by: Ilia Evdokimov
Discussion: https://postgr.es/m/Z6SOha5YFFgvpwQY@ip-10-97-1-34.eu-west-3.compute.internal
|
|
Cipher Feedback Mode, CFB, is a self-synchronizing stream cipher which
is very similar to CBC performed in reverse. Since OpenSSL supports it,
we can easily plug it into the existing cipher selection code without
any need for infrastructure changes.
This patch was simultaneously submitted by Umar Hayat and Vladyslav
Nebozhyn, the latter whom suggested the feauture. The committed patch
is Umar's version.
Author: Umar Hayat <postgresql.wizard@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAPBGcbxo9ASzq14VTpQp3mnUJ5omdgTWUJOvWV0L6nNigWE5jw@mail.gmail.com
|
|
Remove (char *) casts no longer needed after XLogRegisterData() and
XLogRegisterBufData() argument type change.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
