| Age | Commit message (Collapse) | Author |
|---|
|
The existing format of pg_dependencies uses a single-object JSON
structure, with each key value embedding all the knowledge about the
set attributes tracked, like:
{"1 => 5": 1.000000, "5 => 1": 0.423130}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object, particularly when
tracking multiple attributes.
The new output format introduced in this commit is a JSON array of
objects, with:
- A key named "degree", with a float value.
- A key named "attributes", with an array of attribute numbers.
- A key named "dependency", with an attribute number.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"degree": 1.000000, "attributes": [1], "dependency": 5},
{"degree": 0.423130, "attributes": [5], "dependency": 1}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in the header introduced by 1f927cce4498, to ease the
integration of frontend-specific changes that are still under
discussion. (Again a personal note: if anybody comes up with better
name for the keys, of course feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
|
|
The existing format of pg_ndistinct uses a single-object JSON structure
where each key is itself a comma-separated list of attnums, like:
{"3, 4": 11, "3, 6": 11, "4, 6": 11, "3, 4, 6": 11}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object.
The new output format introduced in this commit is an array of objects,
with:
- A key named "attributes", that contains an array of attribute numbers.
- A key named "ndistinct", represented as an integer.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"ndistinct": 11, "attributes": [3,4]},
{"ndistinct": 11, "attributes": [3,6]},
{"ndistinct": 11, "attributes": [4,6]},
{"ndistinct": 11, "attributes": [3,4,6]}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in a new header, to ease with the integration of
frontend-specific changes that are still under discussion. (Personal
note: I am not specifically wedded to these key names, but if there are
better name suggestions for this release, feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
|
|
Presently, these functions look up the relation's OID, lock it, and
then check privileges. Not only does this approach provide no
guarantee that the locked relation matches the arguments of the
lookup, but it also allows users to briefly lock relations for
which they do not have privileges, which might enable
denial-of-service attacks. This commit adjusts these functions to
use RangeVarGetRelidExtended(), which is purpose-built to avoid
both of these issues. The new RangeVarGetRelidCallback function is
somewhat complicated because it must handle both tables and
indexes, and for indexes, we must check privileges on the parent
table and lock it first. Also, it needs to handle a couple of
extremely unlikely race conditions involving concurrent OID reuse.
A downside of this change is that the coding doesn't allow for
locking indexes in AccessShare mode anymore; everything is locked
in ShareUpdateExclusive mode. Per discussion, the original choice
of lock levels was intended for a now defunct implementation that
used in-place updates, so we believe this change is okay.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/Z8zwVmGzXyDdkAXj%40nathan
Backpatch-through: 18
|
|
For import and export, use schemaname/relname rather than
regclass.
This is more natural during export, fits with the other arguments
better, and it gives better control over error handling in case we
need to downgrade more errors to warnings.
Also, use text for the argument types for schemaname, relname, and
attname so that casts to "name" are not required.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=ceOSsx_=oe73QQ-BxUFR2Cwqum7-UP_fPe22DBY0NerA@mail.gmail.com
|
|
After commit f3dae2ae58, the primary purpose of separating the
pg_set_*_stats() from the pg_restore_*_stats() variants was
eliminated.
Leave pg_restore_relation_stats() and pg_restore_attribute_stats(),
which satisfy both purposes, and remove pg_set_relation_stats() and
pg_set_attribute_stats().
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/1457469.1740419458@sss.pgh.pa.us
|
|
Backpatch-through: 13
|
|
Similar to the pg_set_*_stats() functions, except with a variadic
signature that's designed to be more future-proof. Additionally, most
problems are reported as WARNINGs rather than ERRORs, allowing most
stats to be restored even if some cannot.
These functions are intended to be called from pg_dump to avoid the
need to run ANALYZE after an upgrade.
Author: Corey Huinker
Discussion: https://postgr.es/m/CADkLM=eErgzn7ECDpwFcptJKOk9SxZEk5Pot4d94eVTZsvj3gw@mail.gmail.com
|
|
Enable manipulation of attribute statistics. Only superficial
validation is performed, so it's possible to add nonsense, and it's up
to the planner (or other users of statistics) to behave reasonably in
that case.
Bump catalog version.
Author: Corey Huinker
Discussion: https://postgr.es/m/CADkLM=eErgzn7ECDpwFcptJKOk9SxZEk5Pot4d94eVTZsvj3gw@mail.gmail.com
|
|
These functions are used to tweak statistics on any relation, provided
that the user has MAINTAIN privilege on the relation, or is the database
owner.
Bump catalog version.
Author: Corey Huinker
Discussion: https://postgr.es/m/CADkLM=eErgzn7ECDpwFcptJKOk9SxZEk5Pot4d94eVTZsvj3gw@mail.gmail.com
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
The number of places where 10000 was hardcoded had grown a bit beyond
the comfort level. Introduce a macro MAX_STATISTICS_TARGET instead.
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/d6069765-5971-04d3-c10d-e4f7b2e9c459%40eisentraut.org
|
|
Backpatch-through: 11
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
Add pg_statistic_ext_data.stxdinherit flag, so that for each extended
statistics definition we can store two versions of data - one for the
relation alone, one for the whole inheritance tree. This is analogous to
pg_statistic.stainherit, but we failed to include such flag in catalogs
for extended statistics, and we had to work around it (see commits
859b3003de, 36c4bc6e72 and 20b9fa308e).
This changes the relationship between the two catalogs storing extended
statistics objects (pg_statistic_ext and pg_statistic_ext_data). Until
now, there was a simple 1:1 mapping - for each definition there was one
pg_statistic_ext_data row, and this row was inserted while creating the
statistics (and then updated during ANALYZE). With the stxdinherit flag,
we don't know how many rows there will be (child relations may be added
after the statistics object is defined), so there may be up to two rows.
We could make CREATE STATISTICS to always create both rows, but that
seems wasteful - without partitioning we only need stxdinherit=false
rows, and declaratively partitioned tables need only stxdinherit=true.
So we no longer initialize pg_statistic_ext_data in CREATE STATISTICS,
and instead make that a responsibility of ANALYZE. Which is what we do
for regular statistics too.
Patch by me, with extensive improvements and fixes by Justin Pryzby.
Author: Tomas Vondra, Justin Pryzby
Reviewed-by: Tomas Vondra, Justin Pryzby
Discussion: https://postgr.es/m/20210923212624.GI831%40telsasoft.com
|
|
Backpatch-through: 10
|
|
Allow defining extended statistics on expressions, not just just on
simple column references. With this commit, expressions are supported
by all existing extended statistics kinds, improving the same types of
estimates. A simple example may look like this:
CREATE TABLE t (a int);
CREATE STATISTICS s ON mod(a,10), mod(a,20) FROM t;
ANALYZE t;
The collected statistics are useful e.g. to estimate queries with those
expressions in WHERE or GROUP BY clauses:
SELECT * FROM t WHERE mod(a,10) = 0 AND mod(a,20) = 0;
SELECT 1 FROM t GROUP BY mod(a,10), mod(a,20);
This introduces new internal statistics kind 'e' (expressions) which is
built automatically when the statistics object definition includes any
expressions. This represents single-expression statistics, as if there
was an expression index (but without the index maintenance overhead).
The statistics is stored in pg_statistics_ext_data as an array of
composite types, which is possible thanks to 79f6a942bd.
CREATE STATISTICS allows building statistics on a single expression, in
which case in which case it's not possible to specify statistics kinds.
A new system view pg_stats_ext_exprs can be used to display expression
statistics, similarly to pg_stats and pg_stats_ext views.
ALTER TABLE ... ALTER COLUMN ... TYPE now treats indexes the same way it
treats indexes, i.e. it drops and recreates the statistics. This means
all statistics are reset, and we no longer try to preserve at least the
functional dependencies. This should not be a major issue in practice,
as the functional dependencies actually rely on per-column statistics,
which were always reset anyway.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby, Dean Rasheed, Zhihong Yu
Discussion: https://postgr.es/m/ad7891d2-e90c-b446-9fe2-7419143847d7%40enterprisedb.com
|
|
Until now the bsearch_arg function was used only in extended statistics
code, so it was defined in that code. But we already have qsort_arg in
src/port, so let's move it next to it.
|
|
Backpatch-through: 9.5
|
|
Formerly we only applied extended statistics to an OR clause as part
of the clauselist_selectivity() code path for an OR clause appearing
in an implicitly-ANDed list of clauses. This meant that it could only
use extended statistics if all sub-clauses of the OR clause were
covered by a single extended statistics object.
Instead, teach clause_selectivity() how to apply extended statistics
to an OR clause by handling its ORed list of sub-clauses in a similar
manner to an implicitly-ANDed list of sub-clauses, but with different
combination rules. This allows one or more extended statistics objects
to be used to estimate all or part of the list of sub-clauses. Any
remaining sub-clauses are then treated as if they are independent.
Additionally, to avoid double-application of extended statistics, this
introduces "extended" versions of clause_selectivity() and
clauselist_selectivity(), which include an option to ignore extended
statistics. This replaces the old clauselist_selectivity_simple()
function which failed to completely ignore extended statistics when
called from the extended statistics code.
A known limitation of the current infrastructure is that an AND clause
under an OR clause is not treated as compatible with extended
statistics (because we don't build RestrictInfos for such sub-AND
clauses). Thus, for example, "(a=1 AND b=1) OR (a=2 AND b=2)" will
currently be treated as two independent AND clauses (each of which may
be estimated using extended statistics), but extended statistics will
not currently be used to account for any possible overlap between
those clauses. Improving that is left as a task for the future.
Original patch by Tomas Vondra, with additional improvements by me.
Discussion: https://postgr.es/m/20200113230008.g67iyk4cs3xbnjju@development
|
|
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
|
|
Commit 8f321bd16c added support for estimating ScalarArrayOpExpr clauses
(IN/ANY) clauses using functional dependencies. There's no good reason
not to support estimation of these clauses using multi-variate MCV lists
too, so this commits implements that. That makes the behavior consistent
and MCV lists can estimate all variants (ANY/ALL, inequalities, ...).
Author: Tomas Vondra
Review: Dean Rasheed
Discussion: https://www.postgresql.org/message-id/flat/13902317.Eha0YfKkKy%40pierred-pdoc
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
When picking the best extended statistics object for a list of clauses,
it's not enough to look at attnums extracted from the clause list as a
whole. Consider for example this query with OR clauses:
SELECT * FROM t WHERE (t.a = 1) OR (t.b = 1) OR (t.c = 1)
with a statistics defined on columns (a,b). Relying on attnums extracted
from the whole OR clause, we'd consider the statistics usable. That does
not work, as we see the conditions as a single OR-clause, referencing an
attribute not covered by the statistic, leading to empty list of clauses
to be estimated using the statistics and an assert failure.
This changes choose_best_statistics to check which clauses are actually
covered, and only using attributes from the fully covered ones. For the
previous example this means the statistics object will not be considered
as compatible with the OR-clause.
Backpatch to 12, where MCVs were introduced. The issue does not affect
older versions because functional dependencies don't handle OR clauses.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed
Reported-By: Manuel Rigger
Discussion: https://postgr.es/m/CA+u7OA7H5rcE2=8f263w4NZD6ipO_XOrYB816nuLXbmSTH9pQQ@mail.gmail.com
Backpatch-through: 12
|
|
Similar to commits 14aec03502, 7e735035f2 and dddf4cdc33, this commit
makes the order of header file inclusion consistent in more places.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
When building statistics, we need to decide how many rows to sample and
how accurate the resulting statistics should be. Until now, it was not
possible to explicitly define statistics target for extended statistics
objects, the value was always computed from the per-attribute targets
with a fallback to the system-wide default statistics target.
That's a bit inconvenient, as it ties together the statistics target set
for per-column and extended statistics. In some cases it may be useful
to require larger sample / higher accuracy for extended statics (or the
other way around), but with this approach that's not possible.
So this commit introduces a new command, allowing to specify statistics
target for individual extended statistics objects, overriding the value
derived from per-attribute targets (and the system default).
ALTER STATISTICS stat_name SET STATISTICS target_value;
When determining statistics target for an extended statistics object we
first look at this explicitly set value. When this value is -1, we fall
back to the old formula, looking at the per-attribute targets first and
then the system default. This means the behavior is backwards compatible
with older PostgreSQL releases.
Author: Tomas Vondra
Discussion: https://postgr.es/m/20190618213357.vli3i23vpkset2xd@development
Reviewed-by: Kirk Jamison, Dean Rasheed
|
|
This is numbered take 8, and addresses again a set of issues with code
comments, variable names and unreferenced variables.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/b137b5eb-9c95-9c2f-586e-38aba7d59788@gmail.com
|
|
The examine_opclause_expression function needs to return information on
which side of the operator we found the Var, but the variable was called
"isgt" which is rather misleading (it assumes the operator is either
less-than or greater-than, but it may be equality or something else).
Other places in the planner use a variable called "varonleft" for this
purpose, so just adopt the same convention here.
The code also assumed we don't care about this flag for equality, as
(Var = Const) and (Const = Var) should be the same thing. But that does
not work for cross-type operators, in which case we need to pass the
parameters to the procedure in the right order. So just use the same
code for all types of expressions.
This means we don't need to care about the selectivity estimation
function anymore, at least not in this code. We should only get the
supported cases here (thanks to statext_is_compatible_clause).
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
Backpatch-to: 12
|
|
We expect opclauses to have exactly one Var and one Const, but the code
was checking the Const by calling is_pseudo_constant_clause() which is
incorrect - we need a proper constant.
Fixed by using plain IsA(x,Const) to check type of the node. We need to
do these checks in two places, so move it into a separate function that
can be called in both places.
Reported by Andreas Seltenreich, based on crash reported by sqlsmith.
Backpatch to v12, where this code was introduced.
Discussion: https://postgr.es/m/8736jdhbhc.fsf%40ansel.ydns.eu
Backpatch-to: 12
|
|
The serialization format of multivariate MCV lists included alignment in
order to allow direct access to part of the serialized data, but despite
multiple fixes (see for example commits d85e0f366a and ea4e1c0e8f) this
proved to be problematic.
This commit abandons alignment in the serialized format, and just copies
everything during deserialization. We now also track amount of memory
needed after deserialization (including alignment), which allows us to
deserialize the MCV list in a single pass.
Bump catversion, as this affects contents of pg_statistic_ext_data.
Backpatch to 12, where multi-column MCV lists were introduced.
Author: Tomas Vondra
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/2201.1561521148@sss.pgh.pa.us
|
|
Reported-by: Alexander Lakhin
Author: Alexander Lakhin
Reviewed-by: Amit Kapila and Tom Lane
Discussion: https://postgr.es/m/7208de98-add8-8537-91c0-f8b089e2928c@gmail.com
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
|
|
The formulas used to calculate size while (de)serializing mvndistinct
and functional dependencies were based on offset() of the structs. But
that is incorrect, because the structures are not copied directly, we
we copy the individual fields directly.
At the moment this works fine, because there is no alignment padding
on any platform we support. But it might break if we ever added some
fields into any of the structs, for example. It's also confusing.
Fixed by reworking the macros to directly sum sizes of serialized
fields. The macros are now useful only for serialiation, so there is
no point in keeping them in the public header file. So make them
private by moving them to the .c files.
Also adds a couple more asserts to check the serialization, and fixes
an incorrect allocation of MVDependency instead of (MVDependency *).
Reported-By: Tom Lane
Discussion: https://postgr.es/m/29785.1555365602@sss.pgh.pa.us
|
|
This struct seems to have not gotten the word about preferred
coding style for variable-length arrays.
|
|
There were multiple issues in deserialization of pg_mcv_list values.
Firstly, the data is loaded from syscache, but the deserialization was
performed after ReleaseSysCache(), at which point the data might have
already disappeared. Fixed by moving the calls in statext_mcv_load,
and using the same NULL-handling code as existing stats.
Secondly, the deserialized representation used pointers into the
serialized representation. But that is also unsafe, because the data
may disappear at any time. Fixed by reworking and simplifying the
deserialization code to always copy all the data.
And thirdly, when deserializing values for types passed by value, the
code simply did memcpy(d,s,typlen) which however does not work on
bigendian machines. Fixed by using fetch_att/store_att_byval.
|
|
The MCV build should always call get_mincount_for_mcv_list(), as the
there is no other logic to decide whether the MCV list represents all
the data. So just remove the (ngroups > nitems) condition.
Also, when building MCV lists, the number of items was limited by the
statistics target (i.e. up to 10000). But when deserializing the MCV
list, a different value (8192) was used to check the input, causing
an error. Simply ensure that the same value is used in both places.
This should have been included in 7300a69950, but I forgot to include it
in that commit.
|
|
Introduce a third extended statistic type, supported by the CREATE
STATISTICS command - MCV lists, a generalization of the statistic
already built and used for individual columns.
Compared to the already supported types (n-distinct coefficients and
functional dependencies), MCV lists are more complex, include column
values and allow estimation of much wider range of common clauses
(equality and inequality conditions, IS NULL, IS NOT NULL etc.).
Similarly to the other types, a new pseudo-type (pg_mcv_list) is used.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed, David Rowley, Mark Dilger, Alvaro Herrera
Discussion: https://postgr.es/m/dfdac334-9cf2-2597-fb27-f0fb3753f435@2ndquadrant.com
|
|
The old name of this file was never a very good indication of what it
was for. Now that there's also access/relation.h, we have a potential
confusion hazard as well, so let's rename it to something more apropos.
Per discussion, "pathnodes.h" is reasonable, since a good fraction of
the file is Path node definitions.
While at it, tweak a couple of other headers that were gratuitously
importing relation.h into modules that don't need it.
Discussion: https://postgr.es/m/7719.1548688728@sss.pgh.pa.us
|
|
Backpatch-through: certain files through 9.4
|
|
When we first put in collations support, we basically punted on teaching
pg_statistic, ANALYZE, and the planner selectivity functions about that.
They've just used DEFAULT_COLLATION_OID independently of the actual
collation of the data. It's time to improve that, so:
* Add columns to pg_statistic that record the specific collation associated
with each statistics slot.
* Teach ANALYZE to use the column's actual collation when comparing values
for statistical purposes, and record this in the appropriate slot. (Note
that type-specific typanalyze functions are now expected to fill
stats->stacoll with the appropriate collation, too.)
* Teach assorted selectivity functions to use the actual collation of
the stats they are looking at, instead of just assuming it's
DEFAULT_COLLATION_OID.
This should give noticeably better results in selectivity estimates for
columns with nondefault collations, at least for query clauses that use
that same collation (which would be the default behavior in most cases).
It's still true that comparisons with explicit COLLATE clauses different
from the stored data's collation won't be well-estimated, but that's no
worse than before. Also, this patch does make the first step towards
doing better with that, which is that it's now theoretically possible to
collect stats for a collation other than the column's own collation.
Patch by me; thanks to Peter Eisentraut for review.
Discussion: https://postgr.es/m/14706.1544630227@sss.pgh.pa.us
|
|
Backpatch-through: certain files through 9.3
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Avoid using prefix "staext" when everything else uses "statext".
Author: Kyotaro HORIGUCHI
Discussion: https://postgr.es/m/20170615.140041.165731947.horiguchi.kyotaro@lab.ntt.co.jp
|
|
perltidy run not included.
|
|
Follow on patch in the multi-variate statistics patch series.
CREATE STATISTICS s1 WITH (dependencies) ON (a, b) FROM t;
ANALYZE;
will collect dependency stats on (a, b) and then use the measured
dependency in subsequent query planning.
Commit 7b504eb282ca2f5104b5c00b4f05a3ef6bb1385b added
CREATE STATISTICS with n-distinct coefficients. These are now
specified using the mutually exclusive option WITH (ndistinct).
Author: Tomas Vondra, David Rowley
Reviewed-by: Kyotaro HORIGUCHI, Álvaro Herrera, Dean Rasheed, Robert Haas
and many other comments and contributions
Discussion: https://postgr.es/m/56f40b20-c464-fad2-ff39-06b668fac47c@2ndquadrant.com
|
|
Valgrind complains that some uninitialized bytes are being passed around
by the extended statistics code since commit 7b504eb282ca2f, as reported
by Andres Freund. Silence it.
Tomas Vondra submitted a patch which he verified to fix the complaints
in his machine; however I messed with it a bit before pushing, so any
remaining problems are likely my (Álvaro's) fault.
Author: Tomas Vondra
Discussion: https://postgr.es/m/20170325211031.4xxoptigqxm2emn2@alap3.anarazel.de
|
|
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
|
