| Age | Commit message (Collapse) | Author |
|---|
|
If a time zone abbreviation used in datetime input is defined in
the currently active timezone, use that definition in preference
to looking in the timezone_abbreviations list. That allows us to
correctly handle abbreviations that have different meanings in
different timezones. Also, it eliminates an inconsistency between
datetime input and datetime output: the non-ISO datestyles for
timestamptz have always printed abbreviations taken from the IANA
data, not from timezone_abbreviations. Before this fix, it was
possible to demonstrate cases where casting a timestamp to text
and back fails or changes the value significantly because of that
inconsistency.
While this change removes the ability to override the IANA data about
an abbreviation known in the current zone, it's not clear that there's
any real use-case for doing so. But it is clear that this makes life
a lot easier for dealing with abbreviations that have conflicts across
different time zones.
Also update the pg_timezone_abbrevs view to report abbreviations
that are recognized via the IANA data, and *not* report any
timezone_abbreviations entries that are thereby overridden.
Under the hood, there are now two SRFs, one that pulls the IANA
data and one that pulls timezone_abbreviations entries. They're
combined by logic in the view. This approach was useful for
debugging (since the functions can be called on their own).
While I don't intend to document the functions explicitly,
they might be useful to call directly.
Also improve DecodeTimezoneAbbrev's caching logic so that it can
cache zone abbreviations found in the IANA data. Without that,
this patch would have caused a noticeable degradation of the
runtime of timestamptz_in.
Per report from Aleksander Alekseev and additional investigation.
Discussion: https://postgr.es/m/CAJ7c6TOATjJqvhnYsui0=CO5XFMF4dvTGH+skzB--jNhqSQu5g@mail.gmail.com
|
|
Backpatch-through: 13
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
Backpatch-through: 11
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
|
|
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
|
|
Backpatch-through: 10
|
|
pgtime.h documented the PG interpretation of tm_mon right alongside
the POSIX interpretation of tm_year, with no hint that neither
comment was correct throughout our code.
Perhaps someday we ought to switch to using two separate struct
definitions to provide a clearer indication of which semantics are
in use where. But I fear the tedium-versus-safety-gain tradeoff
would not be very good.
Discussion: https://postgr.es/m/CAJ7c6TOMG8zSNEZtCn5SPe+cCk3Lfxb71ZaQwT2F4T7PJ_t=KA@mail.gmail.com
|
|
Backpatch-through: 9.5
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
Backpatch-through: certain files through 9.4
|
|
Backpatch-through: certain files through 9.3
|
|
This makes life easier for extension authors who wish to support
Windows.
Brian Cloutier, slightly amended by me.
Discussion: http://postgr.es/m/CAJCy68fscdNhmzFPS4kyO00CADkvXvEa-28H-OtENk-pa2OTWw@mail.gmail.com
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The comments in formatting.c already said that tm_mon was 1-based not
0-based, but the comments here disagreed.
Dmitry Fedin
|
|
|
|
Backpatch certain files through 9.1
|
|
Backpatch certain files through 9.0
|
|
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
Formerly, when using a SQL-spec timezone setting with a fixed GMT offset
(called a "brute force" timezone in the code), the session_timezone
variable was not updated to match the nominal timezone; rather, all code
was expected to ignore session_timezone if HasCTZSet was true. This is
of course obviously fragile, though a search of the code finds only
timeofday() failing to honor the rule. A bigger problem was that
DetermineTimeZoneOffset() supposed that if its pg_tz parameter was
pointer-equal to session_timezone, then HasCTZSet should override the
parameter. This would cause datetime input containing an explicit zone
name to be treated as referencing the brute-force zone instead, if the
zone name happened to match the session timezone that had prevailed
before installing the brute-force zone setting (as reported in bug #8572).
The same malady could affect AT TIME ZONE operators.
To fix, set up session_timezone so that it matches the brute-force zone
specification, which we can do using the POSIX timezone definition syntax
"<abbrev>offset", and get rid of the bogus lookaside check in
DetermineTimeZoneOffset(). Aside from fixing the erroneous behavior in
datetime parsing and AT TIME ZONE, this will cause the timeofday() function
to print its result in the user-requested time zone rather than some
previously-set zone. It might also affect results in third-party
extensions, if there are any that make use of session_timezone without
considering HasCTZSet, but in all cases the new behavior should be saner
than before.
Back-patch to all supported branches.
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
|
|
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
|
|
|
|
|
|
|
|
|
|
|
|
between the setting of log_line_prefix and the setting of log_timezone. We
can't realistically set log_timezone any earlier than we do now, so the best
behavior seems to be to use GMT zone if any timestamps are to be logged during
early startup. Create a dummy zone variable with a minimal definition of GMT
(in particular it will never know about leap seconds), so that we can set it
up without reference to any external files.
|
|
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
|
|
back-stamped for this.
|
|
timezone actually has a daylight-savings rule. This avoids breaking
cases that used to work because they went through the DecodePosixTimezone
code path. Per contrib regression failures (mea culpa for not running
those yesterday...). Also document the already-applied change to allow
GMT offsets up to 14 hours.
|
|
and create a new view pg_timezone_names that provides information about
the zones known in the 'zic' database. Magnus Hagander, with some
additional work by Tom Lane.
|
|
|
|
|
|
in the zic database or zone names found in the date token table. This
preserves the old ability to do AT TIME ZONE 'PST' along with the new
ability to do AT TIME ZONE 'PST8PDT'. Per gripe from Bricklen Anderson.
Also, fix some inconsistencies in usage of TZ_STRLEN_MAX --- the old
code had the potential for one-byte buffer overruns, though given
alignment considerations it's unlikely there was any real risk.
|
|
|
|
"AT TIME ZONE", and not just the shorlist previously available. For
example:
SELECT CURRENT_TIMESTAMP AT TIME ZONE 'Europe/London';
works fine now. It will also obey whatever DST rules were in effect at
just that date, which the previous implementation did not.
It also supports the AT TIME ZONE on the timetz datatype. The whole
handling of DST is a bit bogus there, so I chose to make it use whatever
DST rules are in effect at the time of executig the query. not sure if
anybody is actuallyi *using* timetz though, it seems pretty
unpredictable just because of this...
Magnus Hagander
|
|
* Changes the APIs to the timezone functions to take a pg_tz pointer as
an argument, representing the timezone to use for the selected
operation.
* Adds a global_timezone variable that represents the current timezone
in the backend as set by SET TIMEZONE (or guc, or env, etc).
* Implements a hash-table cache of loaded tables, so we don't have to
read and parse the TZ file everytime we change a timezone. While not
necesasry now (we don't change timezones very often), I beleive this
will be necessary (or at least good) when "multiple timezones in the
same query" is eventually implemented. And code-wise, this was the time
to do it.
There are no user-visible changes at this time. Implementing the
"multiple zones in one query" is a later step...
This also gets rid of some of the cruft needed to "back out a timezone
change", since we previously couldn't check a timezone unless it was
activated first.
Passes regression tests on win32, linux (slackware 10) and solaris x86.
Magnus Hagander
|
|
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
|
|
use it, as per my proposal of yesterday. This gives us a means of
determining the zone offset to impute to an unlabeled timestamp that
is both efficient and reliable, unlike all our previous tries involving
mktime() and localtime(). The behavior for invalid or ambiguous times
at a DST transition is fixed to be really and truly "assume standard
time", fixing a bug that has come and gone repeatedly but was back
again in 7.4. (There is some ongoing discussion about whether we should
raise an error instead, but for the moment I'll make it do what it was
previously intended to do.)
|
|
|
|
|
|
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
|
|
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
|
