| Age | Commit message (Collapse) | Author |
|---|
|
There was a missing makefile rule to clean up the guc_tables.inc.c
symlink in src/include/. Oversight in commit 63599896545.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/dae6fe89-1e0c-4c3f-8d92-19d23374fb10%40eisentraut.org
|
|
Redefine our exact width types with standard C99 types and macros,
including int64_t, INT64_MAX, INT64_C(), PRId64 etc. We were already
using <stdint.h> types in a few places.
One complication is that Windows' <inttypes.h> uses format strings like
"%I64d", "%I32", "%I" for PRI*64, PRI*32, PTR*PTR, instead of mapping to
other standardized format strings like "%lld" etc as seen on other known
systems. Teach our snprintf.c to understand them.
This removes a lot of configure clutter, and should also allow 64-bit
numbers and other standard types to be used in localized messages
without casting.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/ME3P282MB3166F9D1F71F787929C0C7E7B6312%40ME3P282MB3166.AUSP282.PROD.OUTLOOK.COM
|
|
With the makefile rules, the output of genbki.pl was written to
src/backend/catalog/, and then the header files were linked to
src/include/catalog/.
This changes it so that the output files are written directly to
src/include/catalog/. This makes the logic simpler, and it also makes
the behavior consistent with the meson build system. Also, the list
of catalog files is now kept in parallel in
src/include/catalog/{meson.build,Makefile}, while before the makefiles
had it in src/backend/catalog/Makefile.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/21b74bdc-183d-4dd5-9c27-9378d178f459@eisentraut.org
|
|
The new files added in 9b1a6f50b9 need to be mentioned in a few more
places in the makefiles.
Discussion: https://www.postgresql.org/message-id/flat/E1rSAY2-002hIk-4y%40gemulon.postgresql.org
|
|
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
|
|
An extra rule is needed in src/include/Makefile for VPATH builds to
install any generated server-side include files, and wait_event_types.h
was forgotten from the set.
Issue introduced by fa88928470b5.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/ZTAA11u7CtX6NqlK@msg.df7cb.de
|
|
This commit introduces descriptively-named macros for the
identifiers used in wire protocol messages. These new macros are
placed in a new header file so that they can be easily used by
third-party code.
Author: Dave Cramer
Reviewed-by: Alvaro Herrera, Tatsuo Ishii, Peter Smith, Robert Haas, Tom Lane, Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/CADK3HHKbBmK-PKf1bPNFoMC%2BoBt%2BpD9PH8h5nvmBQskEHm-Ehw%40mail.gmail.com
|
|
The documentation and the code is generated automatically from a new
file called wait_event_names.txt, formatted in sections dedicated to
each wait event class (Timeout, Lock, IO, etc.) with three tab-separated
fields:
- C symbol in enums
- Format in the system views
- Description in the docs
Using this approach has several advantages, as we have proved to be
rather bad in maintaining this area of the tree across the years:
- The order of each item in the documentation and the code, which should
be alphabetical, has become incorrect multiple times, and the script
generating the code and documentation has a few rules to enforce that,
making the maintenance a no-brainer.
- Some wait events were added to the code, but not documented, so this
cannot be missed now.
- The order of the tables for each wait event class is enforced in the
documentation (the input .txt file does so as well for clarity, though
this is not mandatory).
- Less code, shaving 1.2k lines from the tree, with 1/3 of the savings
coming from the code, the rest from the documentation.
The wait event types "Lock" and "LWLock" still have their own code path
for their code, hence only the documentation is created for them. These
classes are listed with a special marker called WAIT_EVENT_DOCONLY in
the input file.
Adding a new wait event now requires only an update of
wait_event_names.txt, with "Lock" and "LWLock" treated as exceptions.
This commit has been tested with configure/Makefile, the CI and VPATH
build. clean, distclean and maintainer-clean were working fine.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
|
|
These new headers have been recently added in 35739b8, but they were not
installed. Sravan has provided the patch for configure/make, while I
have fixed the meson part.
Author: Sravan Kumar, Michael Paquier
Discussion: https://postgr.es/m/CA+=NbjguiQy-MbVqfQ-jQ=2Fcmx3Zs36OkKb-vjt28jMTG0OOg@mail.gmail.com
|
|
This header is semi-private, being used only in files related to
raw parsing, so move to the backend directory where those files
live. This allows removal of Makefile rules that symlink gram.h to
src/include/parser, since gramparse.h can now include gram.h from
within the same directory. This has the side-effect of no longer
installing gram.h and gramparse.h, but there doesn't seem to be a
good reason to continue doing so.
Per suggestion from Andres Freund and Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/20220904181759.px6uosll6zbxcum5%40awork3.anarazel.de
|
|
Commit a7032690f9 replaced $(INSTALL) with plain "cp" for installing the
server header files. It sped up "make install" significantly, because
the old logic called $(INSTALL) separately for every header file,
whereas plain "cp" could copy all the files in one command. However, we
have long since made it a requirement that $(INSTALL) can also install
multiple files in one command, see commit f1c5247563. Switch back to
$(INSTALL).
Discussion: https://www.postgresql.org/message-id/200503252305.j2PN52m23610%40candle.pha.pa.us
Discussion: https://www.postgresql.org/message-id/2415283.1641852217%40sss.pgh.pa.us
|
|
|
|
Add a script to automatically generate the node support functions
(copy, equal, out, and read, as well as the node tags enum) from the
struct definitions.
For each of the four node support files, it creates two include files,
e.g., copyfuncs.funcs.c and copyfuncs.switch.c, to include in the main
file. All the scaffolding of the main file stays in place.
I have tried to mostly make the coverage of the output match what is
currently there. For example, one could now do out/read coverage of
utility statement nodes, but I have manually excluded those for now.
The reason is mainly that it's easier to diff the before and after,
and adding a bunch of stuff like this might require a separate
analysis and review.
Subtyping (TidScan -> Scan) is supported.
For the hard cases, you can just write a manual function and exclude
generating one. For the not so hard cases, there is a way of
annotating struct fields to get special behaviors. For example,
pg_node_attr(equal_ignore) has the field ignored in equal functions.
(In this patch, I have only ifdef'ed out the code to could be removed,
mainly so that it won't constantly have merge conflicts. It will be
deleted in a separate patch. All the code comments that are worth
keeping from those sections have already been moved to the header
files where the structs are defined.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce%40enterprisedb.com
|
|
This follows in the spirit of commit dfb75e478, which created primary
key and uniqueness constraints to improve the visibility of constraints
imposed on the system catalogs. While our catalogs contain many
foreign-key-like relationships, they don't quite follow SQL semantics,
in that the convention for an omitted reference is to write zero not
NULL. Plus, we have some cases in which there are arrays each of whose
elements is supposed to be an FK reference; SQL has no way to model that.
So we can't create actual foreign key constraints to describe the
situation. Nonetheless, we can collect and use knowledge about these
relationships.
This patch therefore adds annotations to the catalog header files to
declare foreign-key relationships. (The BKI_LOOKUP annotations cover
simple cases, but we weren't previously distinguishing which such
columns are allowed to contain zeroes; we also need new markings for
multi-column FK references.) Then, Catalog.pm and genbki.pl are
taught to collect this information into a table in a new generated
header "system_fk_info.h". The only user of that at the moment is
a new SQL function pg_get_catalog_foreign_keys(), which exposes the
table to SQL. The oidjoins regression test is rewritten to use
pg_get_catalog_foreign_keys() to find out which columns to check.
Aside from removing the need for manual maintenance of that test
script, this allows it to cover numerous relationships that were not
checked by the old implementation based on findoidjoins. (As of this
commit, 217 relationships are checked by the test, versus 181 before.)
Discussion: https://postgr.es/m/3240355.1612129197@sss.pgh.pa.us
|
|
Jsonpath grammar and scanner are both quite small. It doesn't worth complexity
to compile them separately. This commit makes grammar and scanner be compiled
at once. Therefore, jsonpath_gram.h and jsonpath_gram.h are no longer needed.
This commit also does some reorganization of code in jsonpath_gram.y.
Discussion: https://postgr.es/m/d47b2023-3ecb-5f04-d253-d557547cf74f%402ndQuadrant.com
|
|
Reported-by: Jeff Janes, Tom Lane
Discussion: https://postgr.es/m/CAMkU%3D1w1qBvoW82ZTFpAKae027R-2OHw-m6ALe0VQRNAFueBVA%40mail.gmail.com
|
|
There's no reason not to install these, and jit.h can be useful for
users of e.g. planner hooks.
Author: Donald Dong
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/296D405F-7F95-49F1-B565-389D6AA78505@csumb.edu
Backpatch: 11-, where JIT compilation was introduced
|
|
Nowadays, all platforms except Windows and older HP-UX have standard
dlopen() support. So having a separate implementation per platform
under src/backend/port/dynloader/ is a bit excessive. Instead, treat
dlopen() like other library functions that happen to be missing
sometimes and put a replacement implementation under src/port/.
Discussion: https://www.postgresql.org/message-id/flat/e11a49cb-570a-60b7-707d-7084c8de0e61%402ndquadrant.com#54e735ae37476a121abb4e33c2549b03
|
|
Make these rules look more like the ones associated with genbki.pl,
to wit:
* Use a stamp file to record when we last ran the script, instead of
relying on the timestamps of the individual output files.
* Take the knowledge out of backend/Makefile and put it in utils/Makefile
where it belongs. I moved down the handling of errcodes.h and probes.h
too, although those continue to be built by separate processes.
In itself, this is just much-needed cleanup with little practical effect.
However, by decoupling these makefile rules from the timestamps of the
generated header files, we open the door to not advancing those timestamps
unnecessarily, which will be taken advantage of by the next commit.
msvc/Solution.pm should be taught to do things similarly, but I'll leave
that for another commit.
Discussion: https://postgr.es/m/16925.1525376229@sss.pgh.pa.us
|
|
This omission prevented partitioning header files from being installed.
Per buildfarm member crake.
|
|
Addition of the catalog/pg_foo_d.h headers seems to have pushed us over
the brink of the maximum command line length for some older platforms
during "make install" for our header files. The main culprit here is
repetition of the target directory path, which could be long.
Rearrange so that we don't repeat that once per file, but only once
per subdirectory.
Per buildfarm.
Discussion: https://postgr.es/m/E1f5Dwm-0004n5-7O@gemulon.postgresql.org
|
|
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
|
|
Commit 7b504eb282ca2f5104b5c00b4f05a3ef6bb1385b overlooked this.
Report and patch by Kyotaro Horiguchi
Discussion: http://postgr.es/m/20170608.145852.54673832.horiguchi.kyotaro@lab.ntt.co.jp
|
|
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
|
|
Per discussion, we want to create a static library and put the stuff into
it that until now has been shared across src/bin/ directories by ad-hoc
methods like symlinking a source file. This commit creates the library and
populates it with a couple of files that contain the widely-useful portions
of pg_dump's dumputils.c file. dumputils.c survives, because it has some
stuff that didn't seem appropriate for fe_utils, but it's significantly
smaller and is no longer referenced from any other directory.
Follow-on patches will move more stuff into fe_utils.
The Mkvcbuild.pm hacking here is just a best guess; we'll see how the
buildfarm likes it.
|
|
Per buildfarm member crake.
|
|
Previously, by mistake, only atomics.h was installed.
Kohei KaiGai
|
|
make maintainer-check was obscure and rarely called in practice, and
many breakages were missed. Fold everything that make maintainer-check
used to do into the normal build. Specifically:
- Call duplicate_oids when genbki.pl is called.
- Check for tabs in SGML files when the documentation is built.
- Run msgfmt with the -c option during the regular build. Add an
additional configure check to see whether we are using the GNU
version. (make maintainer-check probably used to fail with non-GNU
msgfmt.)
Keep maintainer-check as around as phony target for the time being in
case anyone is calling it. But it won't do anything anymore.
|
|
This got missed in commit 8396447cdbdff0b62914748de2fec04281dc9114.
Andres Freund
|
|
Get rid of the fundamentally indefensible assumption that "long long int"
exists and is exactly 64 bits wide on every platform Postgres runs on.
Instead let the configure script select the type to use for "pg_int64".
This is a bit of a pain in the rear since we do not want to pollute client
namespace with all the random symbols that pg_config.h defines; instead
we have to create a separate generated header file, "pg_config_ext.h".
But now that the infrastructure is there, we might have the ability to
add some other stuff that's long been wanting in this area.
|
|
Several server header files would not be installed in vpath builds
because they live in the build directory.
|
|
New header datatype/timestamp.h should be installed for server-side dev.
|
|
This can do various source code checks that are not appropriate for
either the build or the regression tests. Currently: duplicate_oids,
SGML syntax and tabs check, NLS syntax check.
|
|
This fixes make distprep, and seems more robust in other ways as well.
Some special handling is required because errcodes.txt is needed by
some stuff in src/port, but just by src/backend as is the case for the
other generated headers.
While I'm at it, fix a few other things that were overlooked in the
original patch.
|
|
src/pl/plpgsql/src/plerrcodes.h, src/include/utils/errcodes.h, and a
big chunk of errcodes.sgml are now automatically generated from a single
file, src/backend/utils/errcodes.txt.
Jan Urbański, reviewed by Tom Lane.
|
|
|
|
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
|
|
pg_attribute, by having genbki.pl derive the information from the various
catalog header files. This greatly simplifies modification of the
"bootstrapped" catalogs.
This patch finally kills genbki.sh and Gen_fmgrtab.sh; we now rely entirely on
Perl scripts for those build steps. To avoid creating a Perl build dependency
where there was not one before, the output files generated by these scripts
are now treated as distprep targets, ie, they will be built and shipped in
tarballs. But you will need a reasonably modern Perl (probably at least
5.6) if you want to build from a CVS pull.
The changes to the MSVC build process are untested, and may well break ---
we'll soon find out from the buildfarm.
John Naylor, based on ideas from Robert Haas and others
|
|
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
|
|
The original coding was not dealing specially with this file being a symlink,
with the end result that it was not installed in VPATH builds. Oddly enough,
the clean target does know about it ...
|
|
INSTALLDIR/include/server/. Itagaki Takahiro
|
|
change build system to use only Bison. Simplify build rules, make file names
uniform. Don't build the token table header file where it is not needed.
|
|
file portability/instr_time.h, and add a couple more macros to eliminate
some abstraction leakage we formerly had. Also update psql to use this
header instead of its own copy of nearly the same code.
This commit in itself is just code cleanup and shouldn't change anything.
It lays some groundwork for the upcoming function-stats patch, though.
|
|
support DTrace in the future.
Switch from using DTRACE_PROBEn macros to the dynamically generated macros.
Use "dtrace -h" to create a header file that contains the dynamically
generated macros to be used in the source code instead of the DTRACE_PROBEn
macros. A dummy header file is generated for builds without DTrace support.
Author: Robert Lor <Robert.Lor@sun.com>
|
|
but it was missing a bunch of recently-added subdirectories.
|
|
Add tsearch subdirectory is added to Makefile to allow
compile custom tsearch dictionary as an external module.
|
|
|
|
This reduces header file install from 8 seconds to 0.40 seconds.
|
|
|
|
Fabien COELHO
|
