| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 14
|
|
This is the last batch of changes that have been suggested by the
author, this part covering the non-trivial changes. Some of the changes
suggested have been discarded as they seem to lead to more instructions
generated, leaving the parts that can be qualified as in-place
replacements.
Similar work has been done in 1b105f9472bd, 0c3c5c3b06a3 and
31d3847a37be.
Author: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/ad0748d4-3080-436e-b0bc-ac8f86a3466a@gmail.com
|
|
The code over-allocated the memory required for os_page_status, relying
on uint64 for its element size instead of an int, hence doubling what
was required. This could mean quite a lot of memory if dealing with a
lot of NUMA pages.
Oversight in ba2a3c2302f1.
Author: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/ad0748d4-3080-436e-b0bc-ac8f86a3466a@gmail.com
Backpatch-through: 18
|
|
This commit introduces three new functions for marking shared buffers as
dirty by using the functions introduced in 9660906dbd69:
* pg_buffercache_mark_dirty() for one shared buffer.
- pg_buffercache_mark_dirt_relation() for all the shared buffers in a
relation.
* pg_buffercache_mark_dirty_all() for all the shared buffers in pool.
The "_all" and "_relation" flavors are designed to address the
inefficiency of repeatedly calling pg_buffercache_mark_dirty() for each
individual buffer, which can be time-consuming when dealing with with
large shared buffers pool.
These functions are intended as developer tools and are available only
to superusers. There is no need to bump the version of pg_buffercache,
4b203d499c61 having done this job in this release cycle.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aidar Imamov <a.imamov@postgrespro.ru>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ0h_YoSqqutxV6DES1RW8ig6wcA8CR9rJk358YRMxZFmw@mail.gmail.com
|
|
ba2a3c2302f has added a way to check if a buffer is spread across
multiple pages with some NUMA information, via a new view
pg_buffercache_numa that depends on pg_buffercache_numa_pages(), a SQL
function. These can only be queried when support for libnuma exists,
generating an error if not.
However, it can be useful to know how shared buffers and OS pages map
when NUMA is not supported or not available. This commit expands the
capabilities around pg_buffercache_numa:
- pg_buffercache_numa_pages() is refactored as an internal function,
able to optionally process NUMA. Its SQL definition prior to this
commit is still around to ensure backward-compatibility with v1.6.
- A SQL function called pg_buffercache_os_pages() is added, able to work
with or without NUMA.
- The view pg_buffercache_numa is redefined to use
pg_buffercache_os_pages().
- A new view is added, called pg_buffercache_os_pages. This ignores
NUMA for its result processing, for a better efficiency.
The implementation is done so as there is no code duplication between
the NUMA and non-NUMA views/functions, relying on one internal function
that does the job for all of them. The module is bumped to v1.7.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z/fFA2heH6lpSLlt@ip-10-97-1-34.eu-west-3.compute.internal
|
|
These fields have been added in commit ba2a3c2302f, and have never been
used. While on it, this commit moves a comment that was out of place,
improving it.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aSBOKX6pLJzumbmF@ip-10-97-1-34.eu-west-3.compute.internal
|
|
pg_buffercache_pages.relforknumber is defined as an int2, but its value
was stored with ObjectIdGetDatum() rather than Int16GetDatum() in the
result record.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/CAExHW5s2_qwSdhKpVnUzjRMf0cf1PvmhUHQDLaFM3QzKbP1OyQ@mail.gmail.com
|
|
Until now BufferDesc.state was not allowed to be modified while the buffer
header spinlock was held. This meant that operations like unpinning buffers
needed to use a CAS loop, waiting for the buffer header spinlock to be
released before updating.
The benefit of that restriction is that it allowed us to unlock the buffer
header spinlock with just a write barrier and an unlocked write (instead of a
full atomic operation). That was important to avoid regressions in
48354581a49c. However, since then the hottest buffer header spinlock uses have
been replaced with atomic operations (in particular, the most common use of
PinBuffer_Locked(), in GetVictimBuffer() (formerly in BufferAlloc()), has been
removed in 5e899859287).
This change will allow, in a subsequent commit, to release buffer pins with a
single atomic-sub operation. This previously was not possible while such
operations were not allowed while the buffer header spinlock was held, as an
atomic-sub would not have allowed a race-free check for the buffer header lock
being held.
Using atomic-sub to unpin buffers is a nice scalability win, however it is not
the primary motivation for this change (although it would be sufficient). The
primary motivation is that we would like to merge the buffer content lock into
BufferDesc.state, which will result in more frequent changes of the state
variable, which in some situations can cause a performance regression, due to
an increased CAS failure rate when unpinning buffers. The regression entirely
vanishes when using atomic-sub.
Naively implementing this would require putting CAS loops in every place
modifying the buffer state while holding the buffer header lock. To avoid
that, introduce UnlockBufHdrExt(), which can set/add flags as well as the
refcount, together with releasing the lock.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
|
|
This commit adds CHECK_FOR_INTERRUPTS to loops iterating over shared
buffers in several pg_buffercache functions, allowing them to be
interrupted during long-running operations.
Backpatch to all supported versions. Add CHECK_FOR_INTERRUPTS to the
loop in pg_buffercache_pages() in all supported branches, and to
pg_buffercache_summary() and pg_buffercache_usage_counts() in version
16 and newer.
Author: SATYANARAYANA NARLAPURAM <satyanarlapuram@gmail.com>
Discussion: https://postgr.es/m/CAHg+QDcejeLx7WunFT3DX6XKh1KshvGKa8F5au8xVhqVvvQPRw@mail.gmail.com
Backpatch-through: 13
|
|
When querying NUMA status of pages in shared memory, we need to touch
the memory first to get valid results. This may trigger valgrind
reports, because some of the memory (e.g. unpinned buffers) may be
marked as noaccess.
Solved by adding a valgrind suppresion. An alternative would be to
adjust the access/noaccess status before touching the memory, but that
seems far too invasive. It would require all those places to have
detailed knowledge of what the shared memory stores.
The pg_numa_touch_mem_if_required() macro is replaced with a function.
Macros are invisible to suppressions, so it'd have to suppress reports
for the caller - e.g. pg_get_shmem_allocations_numa(). So we'd suppress
reports for the whole function, and that seems to heavy-handed. It might
easily hide other valid issues.
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aEtDozLmtZddARdB@msg.df7cb.de
Backpatch-through: 18
|
|
These are all new to v18
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvrMcr8XD107H3NV=WHgyBcu=sx5+7=WArr-n_cWUqdFXQ@mail.gmail.com
|
|
The large majority of these have been introduced by recent commits done
in the v18 development cycle.
Author: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/9a7763ab-5252-429d-a943-b28941e0e28b@gmail.com
|
|
This moves/renames some of the functions defined in pg_numa.c:
* pg_numa_get_pagesize() is renamed to pg_get_shmem_pagesize(), and
moved to src/backend/storage/ipc/shmem.c. The new name better reflects
that the page size is not related to NUMA, and it's specifically about
the page size used for the main shared memory segment.
* move pg_numa_available() to src/backend/storage/ipc/shmem.c, i.e. into
the backend (which more appropriate for functions callable from SQL).
While at it, improve the comment to explain what page size it returns.
* remove unnecessary includes from src/port/pg_numa.c, adding
unnecessary dependencies (src/port should be suitable for frontent).
These were either leftovers or unnecessary thanks to the other changes
in this commit.
This eliminates unnecessary dependencies on backend symbols, which we
don't want in src/port.
Reported-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
https://postgr.es/m/CALdSSPi5fj0a7UG7Fmw2cUD1uWuckU_e8dJ+6x-bJEokcSXzqA@mail.gmail.com
|
|
The page_num was defined as integer, which should be sufficient for the
near future (with 4K pages it's 8TB). But it's virtually free to return
bigint, and get a wider range. This was agreed on the thread, but I
forgot to tweak this in ba2a3c2302f1.
While at it, make the data types in CREATE VIEW a bit more consistent.
Discussion: https://postgr.es/m/CAKZiRmxh6KWo0aqRqvmcoaX2jUxZYb4kGp3N%3Dq1w%2BDiH-696Xw%40mail.gmail.co
|
|
In addition to the added functions, the pg_buffercache_evict() function now
shows whether the buffer was flushed.
pg_buffercache_evict_relation(): Evicts all shared buffers in a
relation at once.
pg_buffercache_evict_all(): Evicts all shared buffers at once.
Both functions provide mechanism to evict multiple shared buffers at
once. They are designed to address the inefficiency of repeatedly calling
pg_buffercache_evict() for each individual buffer, which can be time-consuming
when dealing with large shared buffer pools. (e.g., ~477ms vs. ~2576ms for
16GB of fully populated shared buffers).
These functions are intended for developer testing and debugging
purposes and are available to superusers only.
Minimal tests for the new functions are included. Also, there was no test for
pg_buffercache_evict(), test for this added too.
No new extension version is needed, as it was already increased this release
by ba2a3c2302f.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aidar Imamov <a.imamov@postgrespro.ru>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ0h_YoSqqutxV6DES1RW8ig6wcA8CR9rJk358YRMxZFmw%40mail.gmail.com
|
|
Introduces a new view pg_buffercache_numa, showing NUMA memory nodes
for individual buffers. For each buffer the view returns an entry for
each memory page, with the associated NUMA node.
The database blocks and OS memory pages may have different size - the
default block size is 8KB, while the memory page is 4K (on x86). But
other combinations are possible, depending on configure parameters,
platform, etc. This means buffers may overlap with multiple memory
pages, each associated with a different NUMA node.
To determine the NUMA node for a buffer, we first need to touch the
memory pages using pg_numa_touch_mem_if_required, otherwise we might get
status -2 (ENOENT = The page is not present), indicating the page is
either unmapped or unallocated.
The view may be relatively expensive, especially when accessed for the
first time in a backend, as it touches all memory pages to get reliable
information about the NUMA node. This may also force allocation of the
shared memory.
Author: Jakub Wartak <jakub.wartak@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CAKZiRmxh6KWo0aqRqvmcoaX2jUxZYb4kGp3N%3Dq1w%2BDiH-696Xw%40mail.gmail.com
|
|
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
|
|
Backpatch-through: 13
|
|
When testing buffer pool logic, it is useful to be able to evict
arbitrary blocks. This function can be used in SQL queries over the
pg_buffercache view to set up a wide range of buffer pool states. Of
course, buffer mappings might change concurrently so you might evict a
block other than the one you had in mind, and another session might
bring it back in at any time. That's OK for the intended purpose of
setting up developer testing scenarios, and more complicated interlocking
schemes to give stronger guararantees about that would likely be less
flexible for actual testing work anyway. Superuser-only.
Author: Palak Chaturvedi <chaturvedipalak1911@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com> (docs, small tweaks)
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Cary Huang <cary.huang@highgo.ca>
Reviewed-by: Cédric Villemain <cedric.villemain+pgsql@abcsql.com>
Reviewed-by: Jim Nasby <jim.nasby@gmail.com>
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CALfch19pW48ZwWzUoRSpsaV9hqt0UPyaBPC4bOZ4W+c7FF566A@mail.gmail.com
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
It was pointed out that pg_buffercache_summary()'s report of
the overall average usage count isn't that useful, and what
would be more helpful in many cases is to report totals for
each possible usage count. Add a new function to do it like
that. Since pg_buffercache 1.4 is already new for v16,
we don't need to create a new extension version; we'll just
define this as part of 1.4.
Nathan Bossart
Discussion: https://postgr.es/m/20230130233040.GA2800702@nathanxps13
|
|
Backpatch-through: 11
|
|
Discussion: https://postgr.es/m/222b43a5-2fb3-2c1b-9cd0-375d376c8246@dunslane.net
|
|
Using pg_buffercache_summary() is significantly cheaper than querying
pg_buffercache and summarizing in SQL.
Author: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Discussion: https://postgr.es/m/CAGPVpCQAXYo54Q%3D8gqBsS%3Du0uk9qhnnq4%2B710BtUhUisX1XGEg%40mail.gmail.com
|
|
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
|
|
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
|
|
Commit 05d4cbf9b6ba708858984b01ca0fc56d59d4ec7c needed to do this,
but didn't.
Per Justin Pryzby.
Discussion: 20220927191710.GG6256@telsasoft.com
|
|
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
|
|
This is preparatory work for a project to increase the number of bits
in a RelFileNumber from 32 to 56.
Along the way, introduce static inline accessor functions for a couple
of BufferTag fields.
Dilip Kumar, reviewed by me. The overall patch series has also had
review at various times from Andres Freund, Ashutosh Sharma, Hannu
Krosing, Vignesh C, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CAFiTN-trubju5YbWAq-BSpZ90-Z6xCVBQE8BVqXqANOZAF1Znw@mail.gmail.com
|
|
We can't check the output of this view very closely without
creating portability headaches, but we can make sure that
the number of rows is as-expected. In any case, this is
sufficient to exercise all the C code within, which is a
lot better than the 0% coverage we had before.
DongWook Lee
Discussion: https://postgr.es/m/CAAcByaLCHGJB7qAENEcx9D09UL=w4ma+yijwF_-1MSqQZ9wK6Q@mail.gmail.com
|
|
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
|
|
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
|
|
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
|
|
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
|
|
That makes the view a lot less disruptive to use on a production system.
Without the locks, you don't get a consistent snapshot across all buffers,
but that's OK. It wasn't a very useful guarantee in practice.
Ivan Kartyshov, reviewed by Tomas Vondra and Robert Haas.
Discusssion: <f9d6cab2-73a7-7a84-55a8-07dcb8516ae5@postgrespro.ru>
|
|
Otherwise, users who have configured shared_buffers >= 256GB won't
be able to use this module. There probably aren't many of those, but
it doesn't hurt anything to fix it so that it works.
Backpatch to 9.4, where MemoryContextAllocHuge was introduced. The
same problem exists in older branches, but there's no easy way to
fix it there.
KaiGai Kohei
|
|
The pg_buffercache_pages function provided by this extension is
PARALLEL SAFE.
Andreas Karlsson
|
|
Pinning/Unpinning a buffer is a very frequent operation; especially in
read-mostly cache resident workloads. Benchmarking shows that in various
scenarios the spinlock protecting a buffer header's state becomes a
significant bottleneck. The problem can be reproduced with pgbench -S on
larger machines, but can be considerably worse for queries which touch
the same buffers over and over at a high frequency (e.g. nested loops
over a small inner table).
To allow atomic operations to be used, cram BufferDesc's flags,
usage_count, buf_hdr_lock, refcount into a single 32bit atomic variable;
that allows to manipulate them together using 32bit compare-and-swap
operations. This requires reducing MAX_BACKENDS to 2^18-1 (which could
be lifted by using a 64bit field, but it's not a realistic configuration
atm).
As not all operations can easily implemented in a lockfree manner,
implement the previous buf_hdr_lock via a flag bit in the atomic
variable. That way we can continue to lock the header in places where
it's needed, but can get away without acquiring it in the more frequent
hot-paths. There's some additional operations which can be done without
the lock, but aren't in this patch; but the most important places are
covered.
As bufmgr.c now essentially re-implements spinlocks, abstract the delay
logic from s_lock.c into something more generic. It now has already two
users, and more are coming up; there's a follupw patch for lwlock.c at
least.
This patch is based on a proof-of-concept written by me, which Alexander
Korotkov made into a fully working patch; the committed version is again
revised by me. Benchmarking and testing has, amongst others, been
provided by Dilip Kumar, Alexander Korotkov, Robert Haas.
On a large x86 system improvements for readonly pgbench, with a high
client count, of a factor of 8 have been observed.
Author: Alexander Korotkov and Andres Freund
Discussion: 2400449.GjM57CE0Yg@dinodell
|
|
|
|
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
|
|
Benchmarks has shown that aligning the buffer descriptor array to
cache lines is important for scalability; especially on bigger,
multi-socket, machines.
Currently the array sometimes already happens to be aligned by
happenstance, depending how large previous shared memory allocations
were. That can lead to wildly varying performance results after minor
configuration changes.
In addition to aligning the start of descriptor array, also force the
size of individual descriptors to be of a common cache line size (64
bytes). That happens to already be the case on 64bit platforms, but
this way we can change the struct BufferDesc more easily.
As the alignment primarily matters in highly concurrent workloads
which probably all are 64bit these days, and the space wastage of
element alignment would be a bit more noticeable on 32bit systems, we
don't force the stride to be cacheline sized on 32bit platforms for
now. If somebody does actual performance testing, we can reevaluate
that decision by changing the definition of BUFFERDESC_PADDED_SIZE.
Discussion: 20140202151319.GD32123@awork2.anarazel.de
Per discussion with Bruce Momjan, Tom Lane, Robert Haas, and Peter
Geoghegan.
|
|
Since the dawn of time (aka Postgres95) multiple pins of the same
buffer by one backend have been optimized not to modify the shared
refcount more than once. This optimization has always used a NBuffer
sized array in each backend keeping track of a backend's pins.
That array (PrivateRefCount) was one of the biggest per-backend memory
allocations, depending on the shared_buffers setting. Besides the
waste of memory it also has proven to be a performance bottleneck when
assertions are enabled as we make sure that there's no remaining pins
left at the end of transactions. Also, on servers with lots of memory
and a correspondingly high shared_buffers setting the amount of random
memory accesses can also lead to poor cpu cache efficiency.
Because of these reasons a backend's buffers pins are now kept track
of in a small statically sized array that overflows into a hash table
when necessary. Benchmarks have shown neutral to positive performance
results with considerably lower memory usage.
Patch by me, review by Robert Haas.
Discussion: 20140321182231.GA17111@alap3.anarazel.de
|
|
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
|
|
Peter Geoghegan
|
|
The new column shows how many backends have a buffer pinned. That can
be useful during development or to diagnose production issues
e.g. caused by vacuum waiting for cleanup locks.
To handle upgrades transparently - the extension might be used in
views - deal with callers expecting the old number of columns.
Reviewed by Fujii Masao and Rajeev rastogi.
|
|
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
|
|
Report by Robert Haas
|
