| Age | Commit message (Collapse) | Author |
|---|
|
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
|
|
Commit dae761a87ed modified brin_page_items() to return the new "empty"
flag for each BRIN range. But the new output parameter was added in the
middle, which may cause crashes when using the new binary with old
function definition.
The ideal solution would be to introduce API versioning similar to what
pg_stat_statements does, but it's too late for that as PG17 was already
released (so we can't introduce a new extension version). We could do
something similar in brin_page_items() by checking the number of output
columns (and ignoring the new flag), but it doesn't seem very nice.
Instead, simply error out and suggest updating the extension to the
latest version. pageinspect is a superuser-only extension, and there's
not much reason to run an older version. Moreover, there's a precedent
for this approach in 691e8b2e18.
Reported by Ľuboslav Špilák, investigation and patch by me. Backpatch to
17, same as dae761a87ed.
Reported-by: Ľuboslav Špilák
Reviewed-by: Michael Paquier, Hayato Kuroda, Peter Geoghegan
Backpatch-through: 17
Discussion: https://postgr.es/m/VI1PR02MB63331C3D90E2104FD12399D38A5D2@VI1PR02MB6333.eurprd02.prod.outlook.com
Discussion: https://postgr.es/m/flat/3385a58f-5484-49d0-b790-9a198a0bf236@vondra.me
|
|
I managed to break this test in two different ways in commit
05036a3155.
First, the output of the new call to tuple_data_split() on the test
sequence is dependent on endianness. This is fixed by setting a
special start value for the test sequence that produces the same
output regardless of the endianness of the machine.
Second, on versions older than v15, the new test case fails under
"force_parallel_mode = regress" with the following error:
ERROR: cannot access temporary tables during a parallel operation
This is because pageinspect's disk-accessing functions are
incorrectly marked PARALLEL SAFE on versions older than v15 (see
commit aeaaf520f4 for details). This one is fixed by changing the
test sequence to be permanent. The only reason it was previously
marked temporary was to avoid needing a DROP SEQUENCE command at
the end of the test. Unlike some other tests in this file, the use
of a permanent sequence here shouldn't result in any test
instability like what was fixed by commit e2933a6e11.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZuOKOut5hhDlf_bP%40nathan
Backpatch-through: 12
|
|
Commit 4b82664156 restricted a number of functions provided by
contrib modules to only relations that use the "heap" table access
method. Sequences always use this table access method, but they do
not advertise as such in the pg_class system catalog, so the
aforementioned commit also (presumably unintentionally) removed
support for sequences from some of these functions. This commit
reintroduces said support for sequences to these functions and adds
a couple of relevant tests.
Co-authored-by: Ayush Vatsa
Reviewed-by: Robert Haas, Michael Paquier, Matthias van de Meent
Discussion: https://postgr.es/m/CACX%2BKaP3i%2Bi9tdPLjF5JCHVv93xobEdcd_eB%2B638VDvZ3i%3DcQA%40mail.gmail.com
Backpatch-through: 12
|
|
To allow test to pass in OpenSSL FIPS mode, similar to 657f5f223e, for
a new test that has been added since.
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://www.postgresql.org/message-id/86763810-70a1-4872-8ba7-1676f788e5a2@eisentraut.org
|
|
As explained in 4d916dd876, the test instability is caused by delayed
cleanup of deleted rows. This commit removes the DELETE, stabilizing the
test without accidentally disabling parallel builds.
The intent of the delete however was to produce empty ranges, and test
that the parallel index build populates those correctly. But there's
another way to create empty ranges - partial indexes, which does not
rely on cleanup of deleted rows.
Idea to use partial indexes by Matthias van de Meent, patch by me.
Discussion: https://postgr.es/m/95d9cd43-5a92-407c-b7e4-54cd303630fe%40enterprisedb.com
|
|
This reverts commit 4d916dd876c3. The goal of that commit was to
stabilize a test of parallel BRIN build, but using a TEMPORARY table
disables parallel index builds on that table, making the test useless.
Discussion: https://postgr.es/m/95d9cd43-5a92-407c-b7e4-54cd303630fe%40enterprisedb.com
|
|
The test for parallel create of BRIN indexes added by commit 8225c2fd40
happens to be unstable - a background transaction (e.g. auto-analyze)
may hold back global xmin for the initial VACUUM / CREATE INDEX. If the
cleanup happens before the next CREATE INDEX, the indexes will not be
exactly the same.
This is the same issue as e2933a6e11, so fix it the same way by making
the table TEMPORARY, which uses an up-to-date cutoff xmin that is not
held back by other processes.
Reported by Alexander Lakhin, who also suggested the fix.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/b58901cd-a7cc-29c6-e2b1-e3d7317c3c69@gmail.com
Discussion: https://postgr.es/m/2892135.1668976646@sss.pgh.pa.us
|
|
Adds a regression test for parallel CREATE INDEX for BRIN indexes, to
improve coverage for BRIN code, particularly code to allow parallel
index builds introduced by b43757171470.
The test is added to pageinspect, as that allows comparing the index to
one built without parallelism. Another option would be to just build the
index with parallelism and then check it produces correct results. But
checking the index is exactly as if built without parallelism makes
these query checks unnecessary.
Discussion: https://postgr.es/m/1df00a66-db5a-4e66-809a-99b386a06d86%40enterprisedb.com
|
|
The new facility makes it easier to optimize bulk loading, as the
logic for buffering, WAL-logging, and syncing the relation only needs
to be implemented once. It's also less error-prone: We have had a
number of bugs in how a relation is fsync'd - or not - at the end of a
bulk loading operation. By centralizing that logic to one place, we
only need to write it correctly once.
The new facility is faster for small relations: Instead of of calling
smgrimmedsync(), we register the fsync to happen at next checkpoint,
which avoids the fsync latency. That can make a big difference if you
are e.g. restoring a schema-only dump with lots of relations.
It is also slightly more efficient with large relations, as the WAL
logging is performed multiple pages at a time. That avoids some WAL
header overhead. The sorted GiST index build did that already, this
moves the buffering to the new facility.
The changes to pageinspect GiST test needs an explanation: Before this
patch, the sorted GiST index build set the LSN on every page to the
special GistBuildLSN value, not the LSN of the WAL record, even though
they were WAL-logged. There was no particular need for it, it just
happened naturally when we wrote out the pages before WAL-logging
them. Now we WAL-log the pages first, like in B-tree build, so the
pages are stamped with the record's real LSN. When the build is not
WAL-logged, we still use GistBuildLSN. To make the test output
predictable, use an unlogged index.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/30e8f366-58b3-b239-c521-422122dd5150%40iki.fi
|
|
This function reads directly a page from a relation, relying on
index_open() to open the index to read from. Unfortunately, this would
crash when using partitioned indexes, as these can be opened with
index_open() but they have no physical pages.
Alexander has fixed the module, while I have written the test.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/18246-f4d9ff7cb3af77e6@postgresql.org
Backpatch-through: 12
|
|
When building BRIN indexes, the brinbuildCallback only advances to the
next page range when seeing a tuple that doesn't belong to the current
one. This means that the index may end up missing ranges at the end of
the table, if those pages do not contain any indexable tuples.
We tend not to have completely empty pages at the end of a relation, but
this also applies to partial indexes, where the tuples may simply not
match the index predicate. This results in inefficient scans using the
affected BRIN index - without the summaries, the page ranges have to be
read and processed, which consumes I/O and possibly also CPU time.
The existing code already added empty ranges for earlier parts of the
table, this commit makes sure we add them for the ranges at the end of
the table too.
Patch by Matthias van de Meent, with review/improvements by me.
Author: Matthias van de Meent
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/CAEze2WiMsPZg%3DxkvSF_jt4%3D69k6K7gz5B8V2wY3gCGZ%2B1BzCbQ%40mail.gmail.com
|
|
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
|
|
Attempting to use this function with a raw page not coming from a GiST
index would cause a crash, as it was missing the same sanity checks as
gist_page_items_bytea(). This slightly refactors the code so as all the
basic validation checks for GiST pages are done in a single routine,
in the same fashion as the pageinspect functions for hash and BRIN.
This fixes an issue similar to 076f4d9. A test is added to stress for
this case. While on it, I have added a similar test for
brin_page_items() with a combination make of a valid GiST index and a
raw btree page. This one was already protected, but it was not tested.
Reported-by: Egor Chindyaskin
Author: Dmitry Koval
Discussion: https://postgr.es/m/17815-fc4a2d3b74705703@postgresql.org
Backpatch-through: 14
|
|
This is like the existing bt_page_stats() function, but it can
report on a range of pages rather than just one at a time.
I don't have a huge amount of faith in the portability of the
new test cases, but they do pass in a 32-bit FreeBSD VM here.
Further adjustment may be needed depending on buildfarm results.
Hamid Akhtar, reviewed by Naeem Akhter, Bertrand Drouvot,
Bharath Rupireddy, and myself
Discussion: https://postgr.es/m/CANugjht-=oGMRmNJKMqnBC69y7vr+wHDmm0ZK6-1pJsxoBKBbA@mail.gmail.com
|
|
pageinspect has occasionally failed on slow buildfarm members,
with symptoms indicating that the expected effects of VACUUM
FREEZE didn't happen. This is presumably because a background
transaction such as auto-analyze was holding back global xmin.
We can work around that by using a temp table in the test.
Since commit a7212be8b, that will use an up-to-date cutoff xmin
regardless of other processes. And pageinspect itself shouldn't
really care whether the table is temp.
Back-patch to v14. There would be no point in older branches
without back-patching a7212be8b, which seems like more trouble
than the problem is worth.
Discussion: https://postgr.es/m/2892135.1668976646@sss.pgh.pa.us
|
|
Getting from get_raw_page() an all-zero page is considered as a valid
case by the buffer manager and it can happen for example when finding a
corrupted page with zero_damaged_pages enabled (using zero_damaged_pages
to look at corrupted pages happens), or after a crash when a relation
file is extended before any WAL for its new data is generated (before a
vacuum or autovacuum job comes in to do some cleanup).
However, all the functions of pageinspect, as of the index AMs (except
hash that has its own idea of new pages), heap, the FSM or the page
header have never worked with all-zero pages, causing various crashes
when going through the page internals.
This commit changes all the pageinspect functions to be compliant with
all-zero pages, where the choice is made to return NULL or no rows for
SRFs when finding a new page. get_raw_page() still works the same way,
returning a batch of zeros in the bytea of the page retrieved. A hard
error could be used but NULL, while more invasive, is useful when
scanning relation files in full to get a batch of results for a single
relation in one query. Tests are added for all the code paths
impacted.
Reported-by: Daria Lepikhova
Author: Michael Paquier
Discussion: https://postgr.es/m/561e187b-3549-c8d5-03f5-525c14e65bd0@postgrespro.ru
Backpatch-through: 10
|
|
A couple of code paths use the special area on the page passed by the
function caller, expecting to find some data in it. However, feeding
an incorrect page can lead to out-of-bound reads when trying to access
the page special area (like a heap page that has no special area,
leading PageGetSpecialPointer() to grab a pointer outside the allocated
page).
The functions used for hash and btree indexes have some protection
already against that, while some other functions using a relation OID
as argument would make sure that the access method involved is correct,
but functions taking in input a raw page without knowing the relation
the page is attached to would run into problems.
This commit improves the set of checks used in the code paths of BRIN,
btree (including one check if a leaf page is found with a non-zero
level), GIN and GiST to verify that the page given in input has a
special area size that fits with each access method, which is done
though PageGetSpecialSize(), becore calling PageGetSpecialPointer().
The scope of the checks done is limited to work with pages that one
would pass after getting a block with get_raw_page(), as it is possible
to craft byteas that could bypass existing code paths. Having too many
checks would also impact the usability of pageinspect, as the existing
code is very useful to look at the content details in a corrupted page,
so the focus is really to avoid out-of-bound reads as this is never a
good thing even with functions whose execution is limited to
superusers.
The safest approach could be to rework the functions so as these fetch a
block using a relation OID and a block number, but there are also cases
where using a raw page is useful.
Tests are added to cover all the code paths that needed such checks, and
an error message for hash indexes is reworded to fit better with what
this commit adds.
Reported-By: Alexander Lakhin
Author: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/16527-ef7606186f0610a1@postgresql.org
Discussion: https://postgr.es/m/561e187b-3549-c8d5-03f5-525c14e65bd0@postgrespro.ru
Backpatch-through: 10
|
|
This commit fixes a set of issues related to the use of the SQL
functions in this module when the caller is able to pass down raw page
data as input argument:
- The page size check was fuzzy in a couple of places, sometimes
looking after only a sub-range, but what we are looking for is an exact
match on BLCKSZ. After considering a few options here, I have settled
down to do a generalization of get_page_from_raw(). Most of the SQL
functions already used that, and this is not strictly required if not
accessing an 8-byte-wide value from a raw page, but this feels safer in
the long run for alignment-picky environment, particularly if a code
path begins to access such values. This also reduces the number of
strings that need to be translated.
- The BRIN function brin_page_items() uses a Relation but it did not
check the access method of the opened index, potentially leading to
crashes. All the other functions in need of a Relation already did
that.
- Some code paths could fail on elog(), but we should to use ereport()
for failures that can be triggered by the user.
Tests are added to stress all the cases that are fixed as of this
commit, with some junk raw pages (\set VERBOSITY ensures that this works
across all page sizes) and unexpected index types when functions open
relations.
Author: Michael Paquier, Justin Prysby
Discussion: https://postgr.es/m/20220218030020.GA1137@telsasoft.com
Backpatch-through: 10
|
|
Some words were duplicated while other places were grammatically
incorrect, including one variable name in the code.
Author: Otto Kekalainen, Justin Pryzby
Discussion: https://postgr.es/m/7DDBEFC5-09B6-4325-B942-B563D1A24BDC@amazon.com
|
|
ld_upper, ld_lower, pd_special and the page size have been using
smallint as return type, which could cause those fields to return
negative values in certain cases for builds configures with a page size
of 32kB.
Bump pageinspect to 1.10. page_header() is able to handle the correct
return type of those fields at runtime when using an older version of
the extension, with some tests are added to cover that.
Author: Quan Zongliang
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/8b8ec36e-61fe-14f9-005d-07bc85aa4eed@yeah.net
|
|
By default VACUUM will skip pages that it can't immediately get
exclusive access to, which means that even activities as harmless
and unpredictable as checkpoint buffer writes might prevent a page
from being processed. Ordinarily this is no big deal, but we have
a small number of test cases that examine the results of VACUUM's
processing and therefore will fail if the page of interest is skipped.
This seems to be the explanation for some rare buildfarm failures.
To fix, add the DISABLE_PAGE_SKIPPING option to the VACUUM commands
in tests where this could be an issue.
In passing, remove a duplicated query in pageinspect/sql/page.sql.
Back-patch as necessary (some of these cases are as old as v10).
Discussion: https://postgr.es/m/413923.1611006484@sss.pgh.pa.us
|
|
Block numbers are 32-bit unsigned integers. Therefore, the smallest
SQL integer type that they can fit in is bigint. However, in the
pageinspect module, most input and output parameters dealing with
block numbers were declared as int. The behavior with block numbers
larger than a signed 32-bit integer was therefore dubious. Change
these arguments to type bigint and add some more explicit error
checking on the block range.
(Other contrib modules appear to do this correctly already.)
Since we are changing argument types of existing functions, in order
to not misbehave if the binary is updated before the extension is
updated, we need to create new C symbols for the entry points, similar
to how it's done in other extensions as well.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
|
|
The newly-added gist pageinspect test prints the LSNs of GiST pages,
expecting them all to be 1 (GistBuildLSN). But with wal_level=minimal,
they got updated by the whole-relation WAL-logging at commit. Fix by
wrapping the problematic tests in the same transaction with the CREATE
INDEX.
Per buildfarm failure on thorntail.
Discussion: https://www.postgresql.org/message-id/3B4F97E5-40FB-4142-8CAA-B301CDFBF982%40iki.fi
|
|
1. The raw bytea representation of the point-type keys used in the test
depends on endianess. Remove the raw key_data column from the test.
2. The items stored on non-leftmost gist page depends on how many items
git on the other pages. This showed up as a failure on 32-bit i386
systems. To fix, only test the gist_page_items() function on the
leftmost leaf page.
Per Andrey Borodin and the buildfarm.
Discussion: https://www.postgresql.org/message-id/9FCEC1DC-86FB-4A57-88EF-DD13663B36AF%40yandex-team.ru
|
|
Author: Andrey Borodin and me
Discussion: https://www.postgresql.org/message-id/3E4F9093-A1B5-4DF8-A292-0B48692E3954%40yandex-team.ru
|
|
Seems like a good idea in view of 006517432 and addd034ae.
Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200306075230.GA118430@paquier.xyz
|
|
After more discussion, the new function added by ddbd5d8 could have been
designed in a better way. Based on an idea from Álvaro, instead of
returning one column which includes both the raw and combined flags, use
two columns, with one for the raw flags and one for the combined flags.
This also takes care of some issues with HEAP_LOCKED_UPGRADED and
HEAP_XMAX_IS_LOCKED_ONLY which are not really combined flags as they
depend on conditions defined by other raw bits, as mentioned by Amit.
While on it, fix an extra issue with combined flags. A combined flag
was returned if at least one of its bits was set, but all its bits need
to be set to include it in the result.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Amit Kapila
Discussion: https://postgr.es/m/20190913114950.GA3824@alvherre.pgsql
|
|
Flags of t_infomask and t_infomask2 for each tuple are already included
in the information returned by heap_page_items as integers, and we
lacked a way to make that information human-readable.
Per discussion, the function includes an option which controls if
combined flags should be decomposed or not. The default is false, to
not decompose combined flags.
The module is bumped to version 1.8.
Author: Craig Ringer, Sawada Masahiko
Reviewed-by: Peter Geoghegan, Robert Haas, Álvaro Herrera, Moon Insung,
Amit Kapila, Michael Paquier, Tomas Vondra
Discussion: https://postgr.es/m/CAMsr+YEY7jeaXOb+oX+RhDyOFuTMdmHjGsBxL=igCm03J0go9Q@mail.gmail.com
|
|
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
|
|
In b0eaa4c51b, we allow FSM to be created only after 4 pages. One of the
tests check the FSM contents and to do that it populates many tuples in
the relation. The FSM contents depend on the availability of freespace in
the page and it could vary because of the alignment of tuples.
This commit removes the dependency on FSM contents.
Author: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KADF6K1bagr0--mGv3dMcZ%3DH_Z-Qtvdfbp5PjaC6PJJA%40mail.gmail.com
|
|
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
|
|
This reverts commit ac88d2962a96a9c7e83d5acfc28fe49a72812086.
|
|
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor with design inputs and some code contribution by Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
|
|
Commit 8b08f7d4820f failed to update these modules to at least give
non-broken error messages for partitioned indexes. Add appropriate
error support to them.
Peter G. was complaining about a problem of unfriendly error messages;
while we haven't fixed that yet, subsequent discussion let to discovery
of these unhandled cases.
Author: Michaël Paquier
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzkOKptQiE51Bh4_xeEHhaBwHkZkGtKizrFMgEkfUuRRQg@mail.gmail.com
|
|
Per buildfarm.
Discussion: https://postgr.es/m/ec295792-a69f-350f-6287-25a20e8f31d5@gmail.com
|
|
Instead of using our standard macro for this calculation, this code
did it itself ... and got it wrong, leading to incorrect display of
the null bitmap in some cases. Noted and fixed by Maksim Milyutin.
In passing, remove a uselessly duplicative error check.
Errors were introduced in commit d6061f83a; back-patch to 9.6
where that came in.
Maksim Milyutin, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/ec295792-a69f-350f-6287-25a20e8f31d5@gmail.com
|
|
Author: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
|
|
Author: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
|
|
|
|
The contrib extensions pageinspect, pg_visibility and pgstattuple only
work against regular relations which have storage. They don't work
against foreign tables, partitioned (parent) tables, views, et al.
Add checks to the user-callable functions to return a useful error
message to the user if they mistakenly pass an invalid relation to a
function which doesn't accept that kind of relation.
In passing, improve some of the existing checks to use ereport() instead
of elog(), add a function to consolidate common checks where
appropriate, and add some regression tests.
Author: Amit Langote, with various changes by me
Reviewed by: Michael Paquier and Corey Huinker
Discussion: https://postgr.es/m/ab91fd9d-4751-ee77-c87b-4dd704c1e59c@lab.ntt.co.jp
|
|
Per a report from Tom Lane, the ffactor reported by hash_metapage_info
and the free_size reported by hash_page_stats vary by platform.
Ashutosh Sharma and Robert Haas
|
|
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
|
|
On closer inspection, commit 84ad68d64 broke gin_leafpage_items(),
because the aligned copy of the page got palloc'd in a short-lived
context whereas it needs to be in the SRF's multi_call_memory_ctx.
This was not exposed by the regression test, because the regression
test doesn't actually exercise the function in a meaningful way.
Fix the code bug, and extend the test in what I hope is a portable
fashion.
|
|
Choose test data that makes the output independent of endianness.
|
|
Choose test data that makes the output independent of endianness and
alignment.
|
|
|
