| Age | Commit message (Collapse) | Author |
|---|
|
Commit 7406ab623fe added a gist support function that we internally
refer to by the symbol GIST_STRATNUM_PROC. This translated from
"well-known" strategy numbers to opfamily-specific strategy numbers.
However, we later (commit 630f9a43cec) changed this to fit into
index-AM-level compare type mapping, so this function actually now
maps from compare type to opfamily-specific strategy numbers. So this
name is no longer fitting.
Moreover, the index AM level also supports the opposite, a function to
map from strategy number to compare type. This is currently not
supported in gist, but one might wonder what this function is supposed
to be called when it is added.
This patch changes the naming of the gist-level functionality to be
more in line with the index-AM-level functionality. This makes sense
because these are essentially the same thing on different levels.
This also changes the names of the externally visible functions that
are provided for use as such a support function.
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/37ebb1d9-9036-485f-a215-e55435689917%40eisentraut.org
|
|
A cascading WAL sender doing logical decoding (as known as doing its
work on a standby) has been using as flush LSN the value returned by
GetStandbyFlushRecPtr() (last position safely flushed to disk). This is
incorrect as such processes are only able to decode changes up to the
LSN that has been replayed by the startup process.
This commit changes cascading logical WAL senders to use the replay LSN,
as returned by GetXLogReplayRecPtr(). This distinction is important
particularly during shutdown, when WAL senders need to send any
remaining available data to their clients, switching WAL senders to a
caught-up state. Using the latest flush LSN rather than the replay LSN
could cause the WAL senders to be stuck in an infinite loop preventing
them to shut down, as the startup process does not run when WAL senders
attempt to catch up, so they could keep waiting for work that would
never happen.
Backpatch down to v16, where logical decoding on standbys has been
introduced.
Author: Alexey Makhmutov <a.makhmutov@postgrespro.ru>
Reviewed-by: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/52138028-7246-421c-9161-4fa108b88070@postgrespro.ru
Backpatch-through: 16
|
|
|
|
Clean up after rearranging PG_TRY blocks.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2954090.1748723636@sss.pgh.pa.us
Backpatch-through: 13
|
|
PLy_elog_impl and its subroutine PLy_traceback intended to avoid
leaking any PyObject reference counts, but their coverage of the
matter was sadly incomplete. In particular, out-of-memory errors
in most of the string-construction subroutines could lead to
reference count leaks, because those calls were outside the
PG_TRY blocks responsible for dropping reference counts.
Fix by (a) adjusting the scopes of the PG_TRY blocks, and
(b) moving the responsibility for releasing the reference counts
of the traceback-stack objects to PLy_elog_impl. This requires
some additional "volatile" markers, but not too many.
In passing, fix an ancient thinko: use of the "e_module_o" PyObject
was guarded by "if (e_type_s)", where surely "if (e_module_o)"
was meant. This would only have visible consequences if the
"__name__" attribute were present but the "__module__" attribute
wasn't, which apparently never happens; but someday it might.
Rearranging the PG_TRY blocks requires indenting a fair amount
of code one more tab stop, which I'll do separately for clarity.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2954090.1748723636@sss.pgh.pa.us
Backpatch-through: 13
|
|
Previously, postgres_fdw always 1) opened a remote transaction in READ
WRITE mode even when the local transaction was READ ONLY, causing a READ
ONLY transaction using it that references a foreign table mapped to a
remote view executing a volatile function to write in the remote side,
and 2) opened the remote transaction in NOT DEFERRABLE mode even when
the local transaction was DEFERRABLE, causing a SERIALIZABLE READ ONLY
DEFERRABLE transaction using it to abort due to a serialization failure
in the remote side.
To avoid these, modify postgres_fdw to open a remote transaction in the
same access/deferrable modes as the local transaction. This commit also
modifies it to open a remote subtransaction in the same access mode as
the local subtransaction.
Although these issues exist since the introduction of postgres_fdw,
there have been no reports from the field. So it seems fine to just fix
them in master only.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAPmGK16n_hcUUWuOdmeUS%2Bw4Q6dZvTEDHb%3DOP%3D5JBzo-M3QmpQ%40mail.gmail.com
|
|
When a MERGE's target table is the parent of an inheritance tree, any
INSERT actions insert into the parent table using ModifyTableState's
rootResultRelInfo. However, there are two bugs in the way is
initialized:
1. ExecInitMerge() incorrectly uses a different ResultRelInfo entry
from ModifyTableState's resultRelInfo array to build the insert
projection, which may not be compatible with rootResultRelInfo.
2. ExecInitModifyTable() does not fully initialize rootResultRelInfo.
Specifically, ri_WithCheckOptions, ri_WithCheckOptionExprs,
ri_returningList, and ri_projectReturning are not initialized.
This can lead to crashes, or incorrect query results due to failing to
check WCO's or process the RETURNING list for INSERT actions.
Fix both these bugs in ExecInitMerge(), noting that it is only
necessary to fully initialize rootResultRelInfo if the MERGE has
INSERT actions and the target table is a plain inheritance parent.
Backpatch to v15, where MERGE was introduced.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/4rlmjfniiyffp6b3kv4pfy4jw3pciy6mq72rdgnedsnbsx7qe5@j5hlpiwdguvc
Backpatch-through: 15
|
|
uint64 was chosen to be consistent with the type used by the query ID,
but the conclusion of a recent discussion for the query ID is that int64
is a better fit as the signed form is shown to the user, for PGSS or
EXPLAIN outputs.
This commit changes the plan ID to use int64, following c3eda50b0648
that has done the same for the query ID.
The plan ID is new to v18, introduced in 2a0cd38da5cc.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aCvzJNwetyEI3Sgo@paquier.xyz
|
|
A few places that access system catalogs don't set up an active
snapshot before potentially accessing their TOAST tables. To fix,
push an active snapshot just before each section of code that might
require accessing one of these TOAST tables, and pop it shortly
afterwards. While at it, this commit adds some rather strict
assertions in an attempt to prevent such issues in the future.
Commit 16bf24e0e4 recently removed pg_replication_origin's TOAST
table in order to fix the same problem for that catalog. On the
back-branches, those bugs are left in place. We cannot easily
remove a catalog's TOAST table on released major versions, and only
replication origins with extremely long names are affected. Given
the low severity of the issue, fixing older versions doesn't seem
worth the trouble of significantly modifying the patch.
Also, on v13 and v14, the aforementioned strict assertions have
been omitted because commit 2776922201, which added
HaveRegisteredOrActiveSnapshot(), was not back-patched. While we
could probably back-patch it now, I've opted against it because it
seems unlikely that new TOAST snapshot issues will be introduced in
the oldest supported versions.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/18127-fe54b6a667f29658%40postgresql.org
Discussion: https://postgr.es/m/18309-c0bf914950c46692%40postgresql.org
Discussion: https://postgr.es/m/ZvMSUPOqUU-VNADN%40nathan
Backpatch-through: 13
|
|
postgres_fdw tries to use PG_TRY blocks to ensure that it will
eventually free the PGresult created by the remote modify command.
However, it's fundamentally impossible for this scheme to work
reliably when there's RETURNING data, because the query could fail
in between invocations of postgres_fdw's DirectModify methods.
There is at least one instance of exactly this situation in the
regression tests, and the ensuing session-lifespan leak is visible
under Valgrind.
We can improve matters by using a memory context reset callback
attached to the ExecutorState context. That ensures that the
PGresult will be freed when the ExecutorState context is torn
down, even if control never reaches postgresEndDirectModify.
I have little faith that there aren't other potential PGresult
leakages in the backend modules that use libpq. So I think it'd
be a good idea to apply this concept universally by creating
infrastructure that attaches a reset callback to every PGresult
generated in the backend. However, that seems too invasive for
v18 at this point, let alone the back branches. So for the
moment, apply this narrow fix that just makes DirectModify safe.
I have a patch in the queue for the more general idea, but it
will have to wait for v19.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Backpatch-through: 13
|
|
Our GSSAPI code only allows packet sizes up to 16kB. However it
emerges that during authentication, larger packets might be needed;
various authorities suggest 48kB or 64kB as the maximum packet size.
This limitation caused login failure for AD users who belong to many
AD groups. To add insult to injury, we gave an unintelligible error
message, typically "GSSAPI context establishment error: The routine
must be called again to complete its function: Unknown error".
As noted in code comments, the 16kB packet limit is effectively a
protocol constant once we are doing normal data transmission: the
GSSAPI code splits the data stream at those points, and if we change
the limit then we will have cross-version compatibility problems
due to the receiver's buffer being too small in some combinations.
However, during the authentication exchange the packet sizes are
not determined by us, but by the underlying GSSAPI library. So we
might as well just try to send what the library tells us to.
An unpatched recipient will fail on a packet larger than 16kB,
but that's not worse than the sender failing without even trying.
So this doesn't introduce any meaningful compatibility problem.
We still need a buffer size limit, but we can easily make it be
64kB rather than 16kB until transport negotiation is complete.
(Larger values were discussed, but don't seem likely to add
anything.)
Reported-by: Chris Gooch <cgooch@bamfunds.com>
Fix-suggested-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DS0PR22MB5971A9C8A3F44BCC6293C4DABE99A@DS0PR22MB5971.namprd22.prod.outlook.com
Backpatch-through: 13
|
|
Previously, XactLockTableWait() and ConditionalXactLockTableWait() could enter
a non-interruptible loop when they successfully acquired a lock on a transaction
but the transaction still appeared to be running. Since this loop continued
until the transaction completed, it could result in long, uninterruptible waits.
Although this scenario is generally unlikely since XactLockTableWait() and
ConditionalXactLockTableWait() can basically acquire a transaction lock
only when the transaction is not running, it can occur in a hot standby.
In such cases, the transaction may still appear active due to
the KnownAssignedXids list, even while no lock on the transaction exists.
For example, this situation can happen when creating a logical replication
slot on a standby.
The cause of the non-interruptible loop was the absence of CHECK_FOR_INTERRUPTS()
within it. This commit adds CHECK_FOR_INTERRUPTS() to the loop in both functions,
ensuring they can be interrupted safely.
Back-patch to all supported branches.
Author: Kevin K Biju <kevinkbiju@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAM45KeELdjhS-rGuvN=ZLJ_asvZACucZ9LZWVzH7bGcD12DDwg@mail.gmail.com
Backpatch-through: 13
|
|
uint64 was perhaps chosen in cff440d36 as the type was uint32 prior to
that widening work.
Having this as uint64 doesn't make much sense and just adds the overhead of
having to remember that we always output this in its signed form. Let's
remove that overhead.
The signed form output is seemingly required since we have no way to
represent the full range of uint64 in an SQL type. We use BIGINT in places
like pg_stat_statements, which maps directly to int64.
The release notes "Source Code" section may want to mention this
adjustment as some extensions may wish to adjust their code.
Author: David Rowley <dgrowleyml@gmail.com>
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/50cb0c8b-994b-48f9-a1c4-13039eb3536b@eisentraut.org
|
|
Add "etc." to indicate other actions will also be improved by
asynchronous I/O.
Reported-by: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bqjgSYA+OdemL-X91Yv53OwsVARZy+-tRyj8YQ=kcj0A@mail.gmail.com
|
|
If we hit out-of-memory between creating the PGconn and inserting
it into dblink's hashtable, we'd lose track of the PGconn, which
is quite bad since it represents a live connection to a remote DB.
Fix by rearranging things so that we create the hashtable entry
first.
Also reduce the number of states we have to deal with by getting rid
of the separately-allocated remoteConn object, instead allocating it
in-line in the hashtable entries. (That incidentally removes a
session-lifespan memory leak observed in the regression tests.)
There is an apparently-irreducible remaining OOM hazard, which
is that if the connection fails at the libpq level (ie it's
CONNECTION_BAD) then we have to pstrdup the PGconn's error message
before we can release it, and theoretically that could fail. However,
in such cases we're only leaking memory not a live remote connection,
so I'm not convinced that it's worth sweating over.
This is a pretty low-probability failure mode of course, but losing
a live connection seems bad enough to justify back-patching.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/1346940.1748381911@sss.pgh.pa.us
Backpatch-through: 13
|
|
An assertion test added in commit 049ef33 could fail when pg_prewarm()
was called on objects without storage, such as partitioned tables.
This resulted in the following failure in assert-enabled builds:
Failed Assert("RelFileNumberIsValid(rlocator.relNumber)")
Note that, in non-assert builds, pg_prewarm() just failed with an error
in that case, so there was no ill effect in practice.
This commit fixes the issue by having pg_prewarm() raise an error early
if the specified object has no storage. This approach is similar to
the fix in commit 4623d7144 for pg_freespacemap.
Back-patched to v17, where the issue was introduced.
Author: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e082e6027610fd0a4091ae6d033aa117@oss.nttdata.com
Backpatch-through: 17
|
|
Oversight in c325a7633fcb, where the LWLock tranche AioUringCompletion
has been added.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aDT5sBOxJTdulXnE@paquier.xyz
|
|
Also add details to asynchronous I/O item.
Reported-by: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_YsVvyantS0X0Y_-vp_97=yGaoYJMXXyCEkR7pumAH3Jg@mail.gmail.com
|
|
pg_stat_statements anticipates that certain constant locations may be
recorded multiple times and attempts to avoid calculating a length for
these locations in fill_in_constant_lengths().
However, during generate_normalized_query() where normalized query
strings are generated, these locations are not excluded from
consideration. This could increment the parameter number counter for
every recorded occurrence at such a location, leading to an incorrect
normalization in certain cases with gaps in the numbers reported.
For example, take this query:
SELECT WHERE '1' IN ('2'::int, '3'::int::text)
Before this commit, it would be normalized like that, with gaps in the
parameter numbers:
SELECT WHERE $1 IN ($3::int, $4::int::text)
However the correct, less confusing one should be like that:
SELECT WHERE $1 IN ($2::int, $3::int::text)
This commit fixes the computation of the parameter numbers to track the
number of constants replaced with an $n by a separate counter instead of
the iterator used to loop through the list of locations.
The underlying query IDs are not changed, neither are the normalized
strings for existing PGSS hash entries. New entries with fresh
normalized queries would automatically get reshaped based on the new
parameter numbering.
Issue discovered while discussing a separate problem for HEAD, but this
affects all the stable branches.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tzxvWXsacGyxrixdhy3tTTDfJQqxyFBRFh31nNHBQ5qA@mail.gmail.com
Backpatch-through: 13
|
|
|
|
Reported-by: Yugo Nagata
Author: Yugo Nagata
Discussion: https://postgr.es/m/20250528232503.7db770f651c2c821c0e3c1df@sraoss.co.jp
|
|
ParseFraction only expects to deal with fields that contain a decimal
point and digit(s). However it's possible in some edge cases for it
to be passed input that doesn't look like that. In particular the
input could look like a valid floating-point number, such as ".123e6".
strtod() will happily eat that, possibly producing a result that is
not within the expected range 0..1, which can result in integer
overflow in the callers. That doesn't have any security consequences,
but it's still not very desirable. Fix by checking that the input
has the expected form.
Similarly, DecodeNumberField only expects to deal with fields that
contain a decimal point and digit(s), but it's sometimes abused to
parse strings that might not look like that. This could result in
failure to reject bogus input, yielding silly results. Again, fix
by rejecting input that doesn't look as-expected. That decision
also means that we can affirmatively answer the very old comment
questioning whether we couldn't save some duplicative code by
using ParseFractionalSecond here.
While these changes should only reject input that nobody would
consider valid, it still doesn't seem like a change to make in
stable branches. Apply to HEAD only.
Reported-by: Evgeniy Gorbanev <gorbanev.es@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1328335.1748371099@sss.pgh.pa.us
|
|
In pl_comp.c, initially create the plpgsql function's cache context
under the assumed-short-lived caller's context, and reparent it under
CacheMemoryContext only upon success. This avoids a process-lifespan
leak of 8kB or more if the function contains syntax errors. (This
leakage has existed for a long time without many complaints, but as
we move towards a possibly multi-threaded future, getting rid of
process-lifespan leaks grows more important.)
In funccache.c, arrange to reclaim the CachedFunction struct in case
the language-specific compile callback function throws an error;
previously, that resulted in an independent process-lifespan leak.
This is arguably a new bug in v18, since the leakage now occurred
for SQL-language functions as well as plpgsql.
Also, don't fill fn_xmin/fn_tid/dcallback until after successful
completion of the compile callback. This avoids a scenario where a
partially-built function cache might appear already valid upon later
inspection, and another scenario where dcallback might fail upon being
presented with an incomplete cache entry. We would have to reach such
a faulty cache entry via a pre-existing fn_extra pointer, so I'm not
sure these scenarios correspond to any live bug. (The predecessor
code in pl_comp.c never took any care about this, and we've heard no
complaints about that.) Still, it's better to be careful.
Given the lack of field complaints, I'm not very excited about
back-patching any of this; but it seems still in-scope for v18.
Discussion: https://postgr.es/m/999171.1748300004@sss.pgh.pa.us
|
|
Reported-by: Dean Rasheed
Author: Dean Rasheed
Discussion: https://postgr.es/m/CAEZATCXZGU3LLMZHobYys1MLpyNMAus7+UUpWeeFYwSaPNC2CA@mail.gmail.com
|
|
As written, the test was throwing an error because of an unbalanced
parenthesis. The regex used in the test is adjusted to not fail and to
test the case of an opening parenthesis in a character class after some
nested square brackets.
Oversight in d46911e584d4.
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
|
|
The code that translates SIMILAR TO pattern matching expressions to
POSIX-style regular expressions did not consider that square brackets
can be nested. For example, in an expression like [[:alpha:]%_], the
logic replaced the placeholders '_' and '%' but it should not.
This commit fixes the conversion logic by tracking the nesting level of
square brackets marking character class areas, while considering that
in expressions like []] or [^]] the first closing square bracket is a
regular character. Multiple tests are added to show how the conversions
should or should not apply applied while in a character class area, with
specific cases added for all the characters converted outside character
classes like an opening parenthesis '(', dollar sign '$', etc.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
Backpatch-through: 13
|
|
Reported-by: Nathan Bossart
Author: Nathan Bossart
Discussion: https://postgr.es/m/aDXLoTcBYjfyqeTA@nathan
|
|
Reported-by: Peter Smith
Discussion: https://postgr.es/m/CAHut+PswZ7wFtpNgv3bdtYK5D0eGMpvz4CcnAxvj7gR_acazGQ@mail.gmail.com
|
|
Set the default behavior of pg_dump and pg_dumpall to be
--no-statistics.
Leave the default for pg_restore and pg_upgrade to be
--with-statistics.
Discussion: https://postgr.es/m/CA+TgmoZ9=RnWcCOZiKYYjZs_AW1P4QXCw--h4dOLLHuf1Omung@mail.gmail.com
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
|
|
Previously, we asserted that the eager scan's success and failure
counters were positive before decrementing them. However, this
assumption was incorrect, as it's possible that some blocks have
already been eagerly scanned by the time eager scanning is disabled.
This commit replaces the assertions with guards to handle this
scenario gracefully.
With this change, we continue to allow read-ahead operations by the
read stream that exceed the success and failure caps. While there is a
possibility that overruns will trigger eager scans of additional
pages, this does not pose a practical concern as the overruns will not
be substantial and remain within an acceptable range.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAD21AoConf6tkVCv-=JhQJj56kYsDwo4jG5+WqgT+ukSkYomSQ@mail.gmail.com
|
|
Improve the wording of the comment a bit, fix whitespace. Also move
the entry so that the section order is consistent with config.sgml.
|
|
Remove superfluous 'is' from sentence.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20250526154412.5f77dfead87af9afc089cc48@sraoss.co.jp
|
|
The test did not wait for all the subscriptions to have caught up when
dropping the subscription "tab_copy". In a slow environment, it could
be possible for the replay of the COMMIT PREPARED transaction "mygid"
to not be confirmed yet, causing one prepared transaction to be left
around before moving to the next steps of the test.
One failure noticed is a transaction found in pg_prepared_xacts for the
cases where copy_data = false and two_phase = true, but there should be
none after dropping the subscription.
As an extra safety measure, a check is added before dropping the
subscription, scanning pg_prepared_xacts to make sure that no prepared
transactions are left once both subscriptions have caught up.
Issue introduced by a8fd13cab0ba, fixing a problem similar to
eaf5321c3524.
Per buildfarm member kestrel.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm329QaZ+bwU--bW6GjbNSZ8-38cDE8QWofafub7NV67oA@mail.gmail.com
Backpatch-through: 15
|
|
To improve the usability of logical replication examples, we need to
enable bulk copy-pasting of DML/DDL series.
Currently, output command tags and prompts disrupt this workflow. While
prompts are typically removed, converting them to comments is acceptable
here, given the multi-server context.
Additionally, ensure all examples containing operators like < and > are
wrapped in CDATA blocks to guarantee correct rendering and consistency
with other places.
Author: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwbhbL1uaDTuo9shmo1rA-fX6XGotR7qZQ7rd-ia5ZDoQA@mail.gmail.com
|
|
The documentation for exported snapshots in logical decoding previously
stated that snapshot creation may fail on a hot standby. This is no longer
accurate, as snapshot exporting on standbys has been supported since
PostgreSQL 10. This commit removes the outdated description.
Additionally, the docs referred to the NOEXPORT_SNAPSHOT option to
suppress snapshot exporting in CREATE_REPLICATION_SLOT. However,
since PostgreSQL 15, NOEXPORT_SNAPSHOT is considered legacy syntax
and retained only for backward compatibility. This commit updates
the documentation for v15 and later to use the modern equivalent:
SNAPSHOT 'nothing'. The older syntax is preserved in documentation for
v14 and earlier.
Back-patched to all supported branches.
Reported-by: Kevin K Biju <kevinkbiju@gmail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Kevin K Biju <kevinkbiju@gmail.com>
Discussion: https://postgr.es/m/174791480466.798.17122832105389395178@wrigleys.postgresql.org
Backpatch-through: 13
|
|
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wzko57+sT=FcxHHo7jnPLhh35up_5aAvogLtj_D9bATsgQ@mail.gmail.com
|
|
I added libcurl to the Requires.private section of libpq.pc in commit
b0635bfda, but I missed that the Autoconf side needs commas added
explicitly. Configurations which used both --with-libcurl and
--with-openssl ended up with the following entry:
Requires.private: libssl, libcrypto libcurl
The pkg-config parser appears to be fairly lenient in this case, and
accepts the whitespace as an equivalent separator, but let's not rely on
that. Add an add_to_list macro (inspired by Makefile.global's
add_to_path) to build up the PKG_CONFIG_REQUIRES_PRIVATE list correctly.
Reported-by: Wolfgang Walther <walther@technowledgy.de>
Reviewed-by: FabrÃzio de Royes Mello <fabriziomello@gmail.com>
Discussion: https://postgr.es/m/CAOYmi+k2z7Rqj5xiWLUT0+bSXLvdE7TYgS5gCOSqSyXyTSSXiQ@mail.gmail.com
|
|
Check the ctx->nested level as we go, to prevent a server from running
the client out of stack space.
The limit we choose when communicating with authorization servers can't
be overly strict, since those servers will continue to add extensions in
their JSON documents which we need to correctly ignore. For the SASL
communication, we can be more conservative, since there are no defined
extensions (and the peer is probably more Postgres code).
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CAOYmi%2Bm71aRUEi0oQE9ciBnBS8xVtMn3CifaPu2kmJzUfhOZgA%40mail.gmail.com
|
|
Includes runtime injection point item by Michael Paquier.
Reported-by: Michael Paquier
Author: Michael Paquier
Discussion: https://postgr.es/m/aDAS0_eWzeGl4sok@paquier.xyz
|
|
PgStat_StatTabEntry and AutoVacOpts structs were leaked until
the end of the autovacuum worker's run, which is bad news if
there are a lot of relations in the database.
Note: pfree'ing the PgStat_StatTabEntry structs here seems a bit
risky, because pgstat_fetch_stat_tabentry_ext does not guarantee
anything about whether its result is long-lived. It appears okay
so long as autovacuum forces PGSTAT_FETCH_CONSISTENCY_NONE, but
I think that API could use a re-think.
Also ensure that the VacuumRelation structure passed to
vacuum() is in recoverable storage.
Back-patch to v15 where we started to manage table statistics
this way. (The AutoVacOpts leakage is probably older, but
I'm not excited enough to worry about just that part.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
Backpatch-through: 15
|
|
If the inner allocation call returns NULL, we should restore the
previous state and return NULL. Previously this code pfree'd
the old chunk anyway, which is surely wrong.
Also, make it call MemoryContextAllocationFailure rather than
summarily returning NULL. The fact that we got control back from the
inner call proves that MCXT_ALLOC_NO_OOM was passed, so this change
is just cosmetic, but someday it might be less so.
This is just a latent bug at present: AFAICT no in-core callers use
this function at all, let alone call it with MCXT_ALLOC_NO_OOM.
Still, it's the kind of bug that might bite back-patched code pretty
hard someday, so let's back-patch to v17 where the bug was introduced
(by commit 743112a2e).
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
Backpatch-through: 17
|
|
Due to concerns raised about the approach, and memory leaks found
in sensitive contexts the functionality is reverted. This reverts
commits 45e7e8ca9, f8c115a6c, d2a1ed172, 55ef7abf8 and 042a66291
for v18 with an intent to revisit this patch for v19.
Discussion: https://postgr.es/m/594293.1747708165@sss.pgh.pa.us
|
|
Move oauth_validator_libraries in postgresql.conf.sample to be grouped
with the other CONN_AUTH_AUTH settings, rather than making up a new
ad-hoc category. This matches the internal categorization and also
how it is listed in the documentation.
|
|
Reported-by: vignesh C
Discussion: https://postgr.es/m/CALDaNm0Wy-vJ6dE+e=y=yuq31i2KvGf-Rs-u6QOG4K7TpU_6Tw@mail.gmail.com
|
|
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-Wz=2CWXgO1+uyR-VfN3ALMtFnfTtXK-VtkoQQ89ogm=4sg@mail.gmail.com
|
|
Item related to btree skip scans.
|
|
Valgrind'ing the postgres_fdw tests showed me that libpq was leaking
PGconn.be_cancel_key. It looks like freePGconn is expecting
pqDropServerData to release it ... but in a cancel connection
object, that doesn't happen.
Looking a little closer, I was dismayed to find that freePGconn
also missed freeing the pgservice, min_protocol_version,
max_protocol_version, sslkeylogfile, scram_client_key_binary,
and scram_server_key_binary strings. There's much less excuse
for those oversights. Worse, that's from five different commits
(a460251f0, 4b99fed75, 285613c60, 2da74d8d6, 761c79508),
some of them by extremely senior hackers.
Fortunately, all of these are new in v18, so we haven't
shipped any leaky versions of libpq.
While at it, reorder the operations in freePGconn to match the
order of the fields in struct PGconn. Some of those free's seem
to have been inserted with the aid of a dartboard.
|
|
9219093cab2607f modularized log_connections output to allow more
granular control over which aspects of connection establishment are
logged. It converted the boolean log_connections GUC into a list of strings
and deprecated previously supported boolean-like values on, off, true,
false, 1, 0, yes, and no. Those values still work, but they are
supported mainly for backwards compatability. As such, documented
examples of log_connections should not use these deprecated values.
Update references in the docs to deprecated log_connections values. Many
of the tests use log_connections. This commit also updates the tests to
use the new values of log_connections. In some of the tests, the updated
log_connections value covers a narrower set of aspects (e.g. the
'authentication' aspect in the tests in src/test/authentication and the
'receipt' aspect in src/test/postmaster). In other cases, the new value
for log_connections is a superset of the previous included aspects (e.g.
'all' in src/test/kerberos/t/001_auth.pl).
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/e1586594-3b69-4aea-87ce-73a7488cdc97%40eisentraut.org
|
|
The code carelessly modified mtstate->ps.plan->targetlist,
which it's not supposed to do. Fortunately, there's not
really any need to do that because the planner already
set up a perfectly acceptable targetlist for the plan node.
We just need to remove the erroneous assignments and update some
relevant comments.
As it happens, the erroneous assignments caused the targetlist to
point to a different part of the source plan tree, so that there
isn't really a risk of the pointer becoming dangling after executor
termination. The only visible effect of this change we can find is
that EXPLAIN will show upper references to the ModifyTable's output
expressions using different variables. Formerly it showed Vars from
the first target relation that survived executor-startup pruning.
Now it always shows such references using the first relation appearing
in the planner output, independently of what happens during executor
pruning. On the whole that seems like a good thing.
Also make a small tweak in ExplainPreScanNode to ensure that the first
relation will receive a refname assignment in set_rtable_names, even
if it got pruned at startup. Previously the Vars might be shown
without any table qualification, which is confusing in a multi-table
query.
I considered back-patching this, but since the bug doesn't seem to
have any really terrible consequences in existing branches, it
seems better to not change their EXPLAIN output. It's not too late
for v18 though, especially since v18 already made other changes in
the EXPLAIN output for these cases.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Andres Freund <andres@anarazel.de>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/213261.1747611093@sss.pgh.pa.us
|
|
xmltotext_with_options sometimes tries to replace the existing
root node of a libxml2 document. In that case xmlDocSetRootElement
will unlink and return the old root node; if we fail to free it,
it's leaked for the remainder of the session. The amount of memory
at stake is not large, a couple hundred bytes per occurrence, but
that could still become annoying in heavy usage.
Our only other xmlDocSetRootElement call is not at risk because
it's working on a just-created document, but let's modify that
code too to make it clear that it's dependent on that.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/1358967.1747858817@sss.pgh.pa.us
Backpatch-through: 16
|
