| Age | Commit message (Collapse) | Author |
|---|
|
Some of the test_decoding regression tests are unstable due to modifying
a sequence. The first increment of a sequence after a checkpoint is
always logged (and thus decoded), which makes the output unpredictable.
The runs are usually much shorter than a checkpoint internal, so these
failures are rare, but we've seen a couple of them on animals that are
either slow or are running with valgrind/clobber cache/...
Fixed by skipping sequence decoding in most tests, with the exception of
the test aimed at testing decoding of sequences.
Reported-by: Amita Kapila
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
|
|
Since 19252e8ec93 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove Python 2 specific code, including
the "Python 2/3 porting layer".
The code to detect conflicts between plpython using Python 2 and 3 is not
removed, in case somebody creates an out-of-tree version adding back support
for Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
|
|
Since 19252e8ec93 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove regression testing infrastructure
dealing with differing output between Python 2 / 3.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
|
|
Since 19252e8ec93 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove extension variants specific to
Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
|
|
9e98583 introduced a helper to centralize building their needed state
(tuplestore, tuple descriptors, etc.), checking for any errors. This
commit updates all places of contrib/ that can be switched to use
SetSingleFuncCall() as a drop-in replacement, resulting in the removal
of a lot of boilerplate code in all the modules updated by this commit.
Per analysis, some places remain as they are:
- pg_logdir_ls() in adminpack/ uses historically TYPEFUNC_RECORD as
return type, and I suspect that changing it may cause issues at run-time
with some of its past versions, down to 1.0.
- dblink/ uses a wrapper function doing exactly the work of
SetSingleFuncCall(). Here the switch should be possible, but rather
invasive so it does not seem the extra backpatch maintenance cost.
- tablefunc/, similarly, uses multiple helper functions with portions of
SetSingleFuncCall() spread across the code paths of this module.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bvDPJoL9mH6eYwvBpPtTGQwbDzfJbCM-OjkSZDu5yTPg@mail.gmail.com
|
|
Currently, only contrib/test_decoding has this property. Use \getenv to
load the timeout value.
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
|
|
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
|
|
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
|
|
The same is done a couple of lines above, so there is no need for the
same, extra, call.
Author: Dong Wook Lee
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAAcBya+szDd1Y6dJU4_dbH_Ye3=G=8O1oQGG01kv3Tpie7wELQ@mail.gmail.com
|
|
This makes more consistent the SRF-related checks in the area of
PL/pgSQL, PL/Perl, PL/Tcl, pageinspect and some of the JSON worker
functions, making it easier to grep for the same error patterns through
the code, reducing a bit the translation work.
It is worth noting that each_worker_jsonb()/each_worker() in jsonfuncs.c
and pageinspect's brin_page_items() were doing a check on expectedDesc
that is not required as they fetch their tuple descriptor directly from
get_call_result_type(). This looks like a set of copy-paste errors that
have spread over the years.
This commit is a continuation of the changes begun in 07daca5, for any
remaining code paths on sight. Like fcc2817, this makes the code more
consistent, easing the integration of a larger patch that will refactor
the way tuplestores are created and checked in a good portion of the
set-returning functions present in core.
I have worked my way through the changes of this patch by myself, and
Ranier has proposed the same changes in a different thread in parallel,
though there were some inconsistencies related in expectedDesc in what
was proposed by him.
Author: Michael Paquier, Ranier Vilela
Discussion: https://postgr.es/m/CAAKRu_azyd1Z3W_r7Ou4sorTjRCs+PxeHw1CWJeXKofkE6TuZg@mail.gmail.com
Discussion: https://postgr.es/m/CAEudQApm=AFuJjEHLBjBcJbxcw4pBMwg2sHwXyCXYcbBOj3hpg@mail.gmail.com
|
|
postgres_fdw commits remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
commits. This patch allows it to commit the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_commit". The default is false.
Etsuro Fujita, reviewed by Fujii Masao and David Zhang.
Discussion: http://postgr.es/m/CAPmGK17dAZCXvwnfpr1eTfknTGdt%3DhYTV9405Gt5SqPOX8K84w%40mail.gmail.com
|
|
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
|
|
PXE_DEV_READ_ERROR hasn't been used since random device support was
removed from pgcrypto (fe0a0b5993dfe24e4b3bcf52fa64ff41a444b8f1).
|
|
PXE_MCRYPT_INTERNAL was apparently never used even when it was added.
|
|
Since commit ffa2e4670, libpq accumulates text in conn->errorMessage
across a whole query cycle. In some situations, we may report more
than one error event within a cycle: the easiest case to reach is
where we report a FATAL error message from the server, and then a
bit later we detect loss of connection. Since, historically, each
error PGresult bears the entire content of conn->errorMessage,
this results in duplication of the FATAL message in any output that
concatenates the contents of the PGresults.
Accumulation in errorMessage still seems like a good idea, especially
in view of the number of places that did ad-hoc error concatenation
before ffa2e4670. So to fix this, let's track how much of
conn->errorMessage has been read out into error PGresults, and only
include new text in later PGresults. The tricky part of that is
to be sure that we never discard an error PGresult once made (else
we'd risk dropping some text, a problem much worse than duplication).
While libpq formerly did that in some code paths, a little bit of
rearrangement lets us postpone making an error PGresult at all until
we are about to return it.
A side benefit of that postponement is that it now becomes practical
to return a dummy static PGresult in cases where we hit out-of-memory
while trying to manufacture an error PGresult. This eliminates the
admittedly-very-rare case where we'd return NULL from PQgetResult,
indicating successful query completion, even though what actually
happened was an OOM failure.
Discussion: https://postgr.es/m/ab4288f8-be5c-57fb-2400-e3e857f53e46@enterprisedb.com
|
|
Commit 6e0cb3dec1 allowed postgres_fdw.application_name to include
escape sequences %a (application name), %d (database name), %u (user name)
and %p (pid). In addition to them, this commit makes it support
the escape sequences for session ID (%c) and cluster name (%C).
These are helpful to investigate where each remote transactions came from.
Author: Fujii Masao
Reviewed-by: Ryohei Takahashi, Kyotaro Horiguchi
Discussion: https://postgr.es/m/1041dc9a-c976-049f-9f14-e7d94c29c4b2@oss.nttdata.com
|
|
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
|
|
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
|
|
I didn't include this test in 2f6501fa3c5, because I was not sure the error
messages for the terminated connection is stable across platforms. But it
sounds like it is, and if not, we'd want to do something about the instability
anyway...
Discussion: https://postgr.es/m/CAD21AoDAeEpAbZEyYJsPZJUmSPaRicVSBObaL7sPaofnKz+9zg@mail.gmail.com
|
|
This function is unreferenced in modern usage; it was superseded in 9.1
by a core function of the same name. It has been left in place in the C
code only so that pre-9.1 SQL definitions of the contrib/xml2 functions
would continue to work. Eleven years seems like enough time for people
to have updated to the extension-style version of the xml2 module, so
let's drop this.
We did this once before, in 20540710e, and then reverted it because
the intended change of PGDLLEXPORT markings didn't happen. This
time the reason is to suppress link-time duplicate-symbol warnings
on AIX. That's not worth a lot perhaps, but the value of keeping
this function has surely dropped to about zero by now.
Discussion: https://postgr.es/m/2717731.1644778752@sss.pgh.pa.us
|
|
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
|
|
Regression tests need to use skip-empty-xacts = false, because there
might be accidental concurrent activity (like autovacuum), particularly
on slow machines. The tests added by 80901b3291 failed to do that in a
couple places, triggering occasional failures on buildfarm.
Fixing the tests however uncovered a bug in the code, because sequence
callbacks did not handle skip-empty-xacts properly. For trasactional
increments we need to check/update the xact_wrote_changes flag, and emit
the BEGIN if it's the first change in the transaction.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20220212220413.b25amklo7t4xb7ni%40alap3.anarazel.de
|
|
Commit 0da92dc530 improved the logical decoding infrastructure to handle
sequences, and did various changes to related parts (WAL logging etc.).
But it did not include any implementation of the new callbacks added to
OutputPluginCallbacks.
This extends test_decoding with two callbacks to decode sequences. The
decoding of sequences may be disabled using 'include-sequences', a new
option of the output plugin.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
|
|
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
|
|
Some pre-2017 Test::More versions need perfect $Test::Builder::Level
maintenance to find the variable. Buildfarm member snapper reported an
overall failure that the file intended to hide via the TODO construct.
That trouble was reachable in v11 and v10. For later branches, this
serves as defense in depth. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220202055556.GB2745933@rfd.leadboat.com
|
|
The GiST sorted build currently chooses split points according to the only page
space utilization. That may lead to higher non-leaf keys overlap and, in turn,
slower search query answers.
This commit makes the sorted build use the opclass's picksplit method. Once
four pages at the level are accumulated, the picksplit method is applied until
each split partition fits the page. Some of our split algorithms could show
significant performance degradation while processing 4-times more data at once.
But those opclasses haven't received the sorted build support and shouldn't
receive it before their split algorithms are improved.
Discussion: https://postgr.es/m/CAHqSB9jqtS94e9%3D0vxqQX5dxQA89N95UKyz-%3DA7Y%2B_YJt%2BVW5A%40mail.gmail.com
Author: Aliaksandr Kalenik, Sergei Shoulbakov, Andrey Borodin
Reviewed-by: Björn Harrtell, Darafei Praliaskouski, Andres Freund
Reviewed-by: Alexander Korotkov
|
|
That's normally the default, but buildfarm member thorntail has
other ideas.
Nathan Bossart
Discussion: http://postgr.es/m/20220203212539.GA1082940@nathanxps13
|
|
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
|
|
Given the existing stipulation that path_contains_parent_reference()
must only be invoked on canonicalized paths, we can simplify things
in the wake of commit c10f830c5. It is now only possible to see
".." at the start of a relative path. That means we can simplify
path_contains_parent_reference() itself quite a bit, and it makes
the two existing outside call sites dead code, since they'd already
checked that the path is absolute.
We could now fold path_contains_parent_reference() into its only
remaining caller path_is_relative_and_below_cwd(). But it seems
better to leave it as a separately callable function, in case any
extensions are using it.
Also document the pre-existing requirement for
path_is_relative_and_below_cwd's input to be likewise canonicalized.
Shenhao Wang and Tom Lane
Discussion: https://postgr.es/m/OSBPR01MB4214FA221FFE046F11F2AD74F2D49@OSBPR01MB4214.jpnprd01.prod.outlook.com
|
|
Teach canonicalize_path() how to strip all unnecessary uses of "."
and "..", replacing the previous ad-hoc code that got rid of only
some such cases. In particular, we can always remove all such
uses from absolute paths.
The proximate reason to do this is that Windows rejects paths
involving ".." in some cases (in particular, you can't put one in a
symlink), so we ought to be sure we don't use ".." unnecessarily.
Moreover, it seems like good cleanup on general principles.
There is other path-munging code that could be simplified now, but
we'll leave that for followup work.
It is tempting to call this a bug fix and back-patch it. On the other
hand, the misbehavior can only be reached if a highly privileged user
does something dubious, so it's not unreasonable to say "so don't do
that". And this patch could result in unexpected behavioral changes,
in case anybody was expecting uses of ".." to stay put. So at least
for now, just put it in HEAD.
Shenhao Wang, editorialized a bit by me
Discussion: https://postgr.es/m/OSBPR01MB4214FA221FFE046F11F2AD74F2D49@OSBPR01MB4214.jpnprd01.prod.outlook.com
|
|
xlog.h is directly and indirectly #included in a lot of places. With
this change, xloginsert.h is no longer unnecessarily included in the
large number of them that don't need it.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVe-W+WM5P44N7eG9C2_FmaeM8Dq5aCnD3fHt0Ba=WR6w@mail.gmail.com
|
|
The COPY CSV format supports the HEADER option to output a header
line. This patch adds the same option to the default text format. On
input, the HEADER option causes the first line to be skipped, same as
with CSV.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
|
|
postgresReScanForeignScan().
Commit 27e1f1456 failed to process a pending asynchronous request made
for a given ForeignScan node in postgresReScanForeignScan() (if any) in
cases where we would only reset the next_tuple counter in that function,
contradicting the assumption that there should be no pending
asynchronous requests that have been made for async-capable subplans for
the parent Append node after ReScan. This led to an assert failure in
an assert-enabled build. I think this would also lead to mis-rewinding
the cursor in that function in the case where we have already fetched
one batch for the ForeignScan node and the asynchronous request has been
made for the second batch, because even in that case we would just reset
the counter when called from that function, so we would fail to execute
MOVE BACKWARD ALL.
To fix, modify that function to process the asynchronous request before
restarting the scan.
While at it, add a comment to a function to match other places.
Per bug #17344 from Alexander Lakhin. Back-patch to v14 where the
aforesaid commit came in.
Patch by me. Test case by Alexander Lakhin, adjusted by me. Reviewed
and tested by Alexander Lakhin and Dmitry Dolgov.
Discussion: https://postgr.es/m/17344-226b78b00de73a7e@postgresql.org
|
|
Buildfarm members kittiwake, tadarida and snapper began to fail
frequently when commits 3cd9c3b921977272e6650a5efbeade4203c4bca2 and
f47ed79cc8a0cfa154dc7f01faaf59822552363f added tests of concurrency, but
the problem was reachable before those commits. Back-patch to v10 (all
supported versions).
Discussion: https://postgr.es/m/20220116210241.GC756210@rfd.leadboat.com
|
|
execution.
Commit 27e1f1456 resets the per-connection states of connections used to
scan foreign tables asynchronously during abort cleanup at main
transaction end, but it failed to do so during subabort cleanup at
subtransaction end, leading to a segmentation fault when re-executing an
asynchronous-foreign-table-scan query in a transaction that was
cancelled in a subtransaction of it.
Fix by modifying pgfdw_abort_cleanup() to reset the per-connection state
of a given connection also when called for subabort cleanup. Also,
modify that function to do the reset in both the abort-cleanup and
subabort-cleanup cases if necessary, to save cycles, and improve a
comment on it a little bit.
Back-patch to v14 where the aforesaid commit came in.
Reviewed by Alexander Pyhalov
Discussion: https://postgr.es/m/CAPmGK14cCV-JA7kNsyt2EUTKvZ4xkr2LNRthi1U1C3cqfGppAw@mail.gmail.com
|
|
Before, SQL-level boolean constants were represented by a string with
a cast, and internal Boolean values in DDL commands were usually
represented by Integer nodes. This takes the place of both of these
uses, making the intent clearer and having some amount of type safety.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8c1a2e37-c68d-703c-5a83-7a6077f4f997@enterprisedb.com
|
|
SELinux itself does this (at least in modern releases), and it
seems like a good idea to reduce confusion.
Dave Page
Discussion: https://postgr.es/m/CA+OCxowsQoLEYc=jN7OtNvOdX0Jg5L7nMYt++=k0X78HGq-sXg@mail.gmail.com
|
|
The existing cryptohash facility was causing problems in some code paths
related to MD5 (frontend and backend) that relied on the fact that the
only type of error that could happen would be an OOM, as the MD5
implementation used in PostgreSQL ~13 (the in-core implementation is
used when compiling with or without OpenSSL in those older versions),
could fail only under this circumstance.
The new cryptohash facilities can fail for reasons other than OOMs, like
attempting MD5 when FIPS is enabled (upstream OpenSSL allows that up to
1.0.2, Fedora and Photon patch OpenSSL 1.1.1 to allow that), so this
would cause incorrect reports to show up.
This commit extends the cryptohash APIs so as callers of those routines
can fetch more context when an error happens, by using a new routine
called pg_cryptohash_error(). The error states are stored within each
implementation's internal context data, so as it is possible to extend
the logic depending on what's suited for an implementation. The default
implementation requires few error states, but OpenSSL could report
various issues depending on its internal state so more is needed in
cryptohash_openssl.c, and the code is shaped so as we are always able to
grab the necessary information.
The core code is changed to adapt to the new error routine, painting
more "const" across the call stack where the static errors are stored,
particularly in authentication code paths on variables that provide
log details. This way, any future changes would warn if attempting to
free these strings. The MD5 authentication code was also a bit blurry
about the handling of "logdetail" (LOG sent to the postmaster), so
improve the comments related that, while on it.
The origin of the problem is 87ae969, that introduced the centralized
cryptohash facility. Extra changes are done for pgcrypto in v14 for the
non-OpenSSL code path to cope with the improvements done by this
commit.
Reported-by: Michael Mühlbeyer
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/89B7F072-5BBE-4C92-903E-D83E865D9367@trivadis.com
Backpatch-through: 14
|
|
If contrib/btree_gist is used to make a GIST index on a char(N)
(bpchar) column, and that column is retrieved via an index-only
scan, what came out had all trailing spaces removed. Since
that doesn't happen in any other kind of table scan, this is
clearly a bug. The cause is that gbt_bpchar_compress() strips
trailing spaces (using rtrim1) before a new index entry is made.
That was probably a good idea when this code was first written,
but since we invented index-only scans, it's not so good.
One answer could be to mark this opclass as incapable of index-only
scans. But to do so, we'd need an extension module version bump,
followed by manual action by DBAs to install the updated version
of btree_gist. And it's not really a desirable place to end up,
anyway.
Instead, let's fix the code by removing the unwanted space-stripping
action and adjusting the opclass's comparison logic to ignore
trailing spaces as bpchar normally does. This will not hinder
cases that work today, since index searches with this logic will
act the same whether trailing spaces are stored or not. It will
not by itself fix the problem of getting space-stripped results
from index-only scans, of course. Users who care about that can
REINDEX affected indexes after installing this update, to immediately
replace all improperly-truncated index entries. Otherwise, it can
be expected that the index's behavior will change incrementally as
old entries are replaced by new ones.
Per report from Alexander Lakhin. Back-patch to all supported branches.
Discussion: https://postgr.es/m/696c995b-b37f-5526-f45d-04abe713179f@gmail.com
|
|
Backpatch-through: 10
|
|
Commit 449ab63505 added postgres_fdw.application_name GUC that specifies
a value for application_name configuration parameter used when postgres_fdw
establishes a connection to a foreign server. Also commit 6e0cb3dec1
allowed it to include escape sequences. Both commits added the regression
tests for the GUC, but those tests were reverted by commits 98dbef90eb and
5e64ad3697 because they were unstable and caused some buildfarm members
to report the failure.
This is the third try to add the regression test for
postgres_fdw.application_name GUC.
One of issues to make the test unstable was to have used
postgres_fdw_disconnect_all() to close the existing remote connections.
The test expected that the remote connection and its corresponding backend
at the remote server disappeared just after postgres_fdw_disconnect_all()
was executed, but it could take a bit time for them to disappear.
To make sure that they exit, this commit makes the test use
pg_terminate_backend() with the timeout at the remote server, instead.
If the timeout is set to greater than zero, this function waits until
they are actually terminated (or until the given time has passed).
Another issue was that the test didn't take into consideration the case
where postgres_fdw.application_name containing some escape sequences was
converted to the string larger than NAMEDATALEN. In this case it was
truncated to less than NAMEDATALEN when it's passed to the remote server,
but the test expected wrongly that full string of application_name was
always viewable. This commit changes the test so that it can handle that case.
Author: Fujii Masao
Reviewed-by: Masahiko Sawada, Hayato Kuroda, Kyotaro Horiguchi
Discussion: https://postgr.es/m/3220909.1631054766@sss.pgh.pa.us
Discussion: https://postgr.es/m/20211224.180006.2247635208768233073.horikyota.ntt@gmail.com
Discussion: https://postgr.es/m/e7b61420-a97b-8246-77c4-a0d48fba5a45@oss.nttdata.com
|
|
These test cases have been commented out since citext was invented,
because at the time we had no nice way to deal with tests that
have restrictions such as requiring UTF8 encoding. But now we do
have a convention for that, ie put them into a separate test file
with an early-exit path. So let's enable these tests to run when
their prerequisites are satisfied.
(We may have to tighten the prerequisites beyond the "encoding = UTF8
and locale != C" checks made here. But let's put it on the buildfarm
and see what blows up.)
Dag Lem
Discussion: https://postgr.es/m/ygezgoacs4e.fsf_-_@sid.nimrod.no
|
|
We can revert the code changes of commit b5febc1d1 now, because
commit 9a3ddeb51 installed a real solution for the difficulty
that b5febc1d1 just dodged, namely that the planner might pick
the wrong one of several index columns nominally containing the
same value. It only matters which one we pick if we pick one
that's not returnable, and that mistake is now foreclosed.
Although both of the aforementioned commits were back-patched,
I don't feel a need to take any risk by back-patching this one.
The cases that it improves are very corner-ish.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
|
|
Since 4f0b096, pgss_store() does nothing if compute_query_id is disabled
or if no other module computed a query identifier, but the top comment
of this function did not reflect that. This behavior is already
documented in its own code path, and this just removes the inconsistent
comment.
Author: Kyotaro Horiguchi
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20211122.153823.1325120762360533122.horikyota.ntt@gmail.com
Backpatch-through: 14
|
|
Revert commits 5609cc01c, 2ed8a8cc5, and 75d22069e until we have
a less broken idea of how this should work in parallel workers.
Per buildfarm.
Discussion: https://postgr.es/m/1640909.1640638123@sss.pgh.pa.us
|
|
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
|
|
Commit 6e0cb3dec1 added the tests that check that escape sequences in
postgres_fdw.application_name setting are replaced with status information
expectedly. But they were unstable and caused some buildfarm
members to report the failure. This commit reverts those unstable tests.
|
|
application_name that used when postgres_fdw establishes a connection to
a foreign server can be specified in either or both a connection parameter
of a server object and GUC postgres_fdw.application_name. This commit
allows those parameters to include escape sequences that begins with
% character. Then postgres_fdw replaces those escape sequences with
status information. For example, %d and %u are replaced with user name
and database name in local server, respectively. This feature enables us
to add information more easily to track remote transactions or queries,
into application_name of a remote connection.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Hou Zhijie, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB5866FAE71C66547C64616584F5EB9@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
|
|
One code path related to this flavor of ALTER TABLE was checking that
the relation to detach has to be a normal table or a partitioned table,
which would fail if using the command with a different relation kind.
Views, sequences and materialized views cannot be part of a partition
tree, so these would cause the command to fail anyway, but the assertion
was triggered. Foreign tables can be part of a partition tree, and
again the assertion would have failed. The simplest solution is just to
remove this assertion, so as we get the same failure as the
non-concurrent code path.
While on it, add a regression test in postgres_fdw for the concurrent
partition detach of a foreign table, as per a suggestion from Alexander
Lakhin.
Issue introduced in 71f4c8c.
Reported-by: Alexander Lakhin
Author: Michael Paquier, Alexander Lakhin
Reviewed-by: Peter Eisentraut, Kyotaro Horiguchi
Discussion: https://postgr.es/m/17339-a9e09aaf38a3457a@postgresql.org
Backpatch-through: 14
|
|
Extensions that define any custom GUCs should call
EmitWarningsOnPlaceholders after doing so, to help catch misspellings.
Many of our contrib modules hadn't gotten the memo on that, though.
Also add such calls to src/test/modules extensions that have GUCs.
While these aren't really user-facing, they should illustrate good
practice not faulty practice.
Shinya Kato
Discussion: https://postgr.es/m/524fa2c0a34f34b68fbfa90d0760d515@oss.nttdata.com
|
