| Age | Commit message (Collapse) | Author |
|---|
|
Discussion: https://postgr.es/m/82c4c816-06f6-d3e3-ba02-fca4a5cef065%40enterprisedb.com
Reviewed-by: Peter Eisentraut
|
|
Instead of checking for the much older gss_init_sec_context, check for
gss_store_cred_into which was added in MIT Kerberos 1.11 (circa 2012).
Discussion: https://postgr.es/m/2313469.1681695223%40sss.pgh.pa.us
|
|
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
|
|
Calling fseek() or ftello() on a handle to a non-seeking device such as
a pipe or a communications device is not supported. Unfortunately,
MSVC's flavor of these routines, _fseeki64() and _ftelli64(), do not
return an error when given a pipe as handle. Some of the logic of
pg_dump and restore relies on these routines to check if a handle is
seekable, causing failures when passing the contents of pg_dump to
pg_restore through a pipe, for example.
This commit introduces wrappers for fseeko() and ftello() on MSVC so as
any callers are able to properly detect the cases of non-seekable
handles. This relies mainly on GetFileType(), sharing a bit of code
with the MSVC port for fstat(). The code in charge of getting a file
type is refactored into a new file called win32common.c, shared by
win32stat.c and the new win32fseek.c. It includes the MSVC ports for
fseeko() and ftello().
Like 765f5df, this is backpatched down to 14, where the fstat()
implementation for MSVC is able to understand about files larger than
4GB in size. Using a TAP test for that is proving to be tricky as
IPC::Run handles the pipes by itself, still I have been able to check
the fix manually.
Reported-by: Daniel Watzinger
Author: Juan José SantamarÃa Flecha, Michael Paquier
Discussion: https://postgr.es/m/CAC+AXB26a4EmxM2suXxPpJaGrqAdxracd7hskLg-zxtPB50h7A@mail.gmail.com
Backpatch-through: 14
|
|
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
|
|
Support for SCM credential authentication has been removed in the
backend in 9.1, and libpq has kept some code to handle it for
compatibility.
Commit be4585b, that did the cleanup of the backend code, has done
so because the code was not really portable originally. And, as there
are likely little chances that this is used these days, this removes the
remaining code from libpq. An error will now be raised by libpq if
attempting to connect to a server that returns AUTH_REQ_SCM_CREDS,
instead.
References to SCM credential authentication are removed from the
protocol documentation. This removes some meson and configure checks.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZBLH8a4otfqgd6Kn@paquier.xyz
|
|
Time to remove various code, comments and configure/meson probes
relating to ancient BSD, SunOS, GNU/Hurd, IRIX, NeXT and Unixware.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGJMNGUAqf27WbckYFrM-Mavy0RKJvocfJU%3DJ2XcAZyv%2Bw%40mail.gmail.com
|
|
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
|
|
Backpatch-through: 11
|
|
Clang 16 is still in development, but seawasp reveals that it has
started warning about many of our casts of function pointers (those
introduced by commit 1c27d16e, and some older ones). Disable the new
warning for now, since otherwise buildfarm animal seawasp fails, and we
have no current plans to change our strategy for these callback function
types.
May be back-patched with other Clang/LLVM 16 changes around release
time.
Discussion: https://postgr.es/m/CA%2BhUKGJvX%2BL3aMN84ksT-cGy08VHErRNip3nV-WmTx7f6Pqhyw%40mail.gmail.com
|
|
The tests don't have much coverage of segment related code, as we don't create
large enough tables. To make it easier to test these paths, add a new option
specifying the segment size in blocks.
Set the new option to 6 blocks in one of the CI tasks. Smaller numbers
currently fail one of the tests, for understandable reasons.
While at it, fix some segment size related issues in the meson build.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20221107171355.c23fzwanfzq2pmgt@awork3.anarazel.de
|
|
Previously export_dynamic was set in src/makefiles/Makefile.$port. For solaris
this required exporting with_gnu_ld. The determination of with_gnu_ld would be
nontrivial to copy for meson PGXS compatibility. It's also nice to delete
libtool.m4.
This uses -Wl,--export-dynamic on all platforms, previously all platforms but
FreeBSD used -Wl,-E. The likelihood of a name conflict seems lower with the
longer spelling.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
|
|
The only use of $(LD) in Makefiles is for AIX, to generate the export file for
the backend. We only support the system linker on AIX and we already hardcode
the path to a number of other binaries. Removing LD substitution will simplify
the upcoming meson PGXS compatibility.
While at it, add a comment why -r is used.
A subsequent commit will remove the determination of LD from configure as
well.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
|
|
Until now we emitted the cflags to build the CRC objects into architecture
specific variables. That doesn't make a whole lot of sense to me - we're never
going to target x86 and arm at the same time, so they don't need to be
separate variables.
It might be better to instead continue to have CFLAGS_SSE42 /
CFLAGS_ARMV8_CRC32C be computed by PGAC_ARMV8_CRC32C_INTRINSICS /
PGAC_SSE42_CRC32_INTRINSICS and then set CFLAGS_CRC based on those. But it
seems unlikely that we'd need other sets of CRC specific flags for those two
architectures at the same time.
This simplifies the upcoming meson PGXS compatibility.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
|
|
Various test suites use the "openssl" program as part of their setup.
There isn't a way to override which openssl program is to be used,
other than by fiddling with the path, perhaps. This has gotten
increasingly problematic because different versions of openssl have
different capabilities and do different things by default.
This patch checks for an openssl binary in configure and meson setup,
with appropriate ways to override it. This is similar to how "lz4"
and "zstd" are handled, for example. The meson build system actually
already did this, but the result was only used in some places. This
is now applied more uniformly.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/dc638b75-a16a-007d-9e1c-d16ed6cf0ad2%40enterprisedb.com
|
|
Per https://llvm.org/docs/OpaquePointers.html, support for non-opaque
pointers still exists and we can request that on our context. We have
until LLVM 16 to move to opaque pointers, a much larger change.
Back-patch to 11, where LLVM support arrived.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAMHz58Sf_xncdyqsekoVsNeKcruKootLtVH6cYXVhhUR1oKPCg%40mail.gmail.com
|
|
This way we don't need RANLIB anymore, making it a bit simpler for the meson
build to generate Makefile.global for PGXS compatibility.
FreeBSD, NetBSD, OpenBSD, the only platforms where we didn't use AROPT=crs,
all have supported the 's' option for a long time.
On macOS we ran ranlib after installing a static library. This was added a
long time ago, in 58ad65ec2def. I cannot reproduce an issue in more recent
macOS versions. This is removed now.
Based on discussion with Tom, I left the 'touch' at the end of static
libraries generation, added in 826eff57c4c, in place. While it looks like
current versions of Apple's ar/ranlib don't need it, it was needed not too
long ago.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
|
|
Since cd4e8caaa, we've been able to build the source tree with
-Wshadow=compatible-local without any warnings. Lots of work was done by
Justin Pryzby and I (David) to get all our code to compile warning free
with that flag. In that process, 2 bugs (16d69ec29 and af7d270dd) were
discovered and fixed. Additionally, "git log --grep=shadow" shows that
there is no shortage of other bugs that have been fixed over the years
which were caused by variable shadowing.
In light of the above, it seems very much worthwhile to add at least
-Wshadow=compatible-local to our standard compilation flags. We *may*
want to go further and take this to -Wshadow=local in the future, but
we're not ready for that today, so let's add -Wshadow=compatible-local now
to help make sure we don't introduce further local variable shadowing.
Author: Andres Freund
Discussion: https://postgr.es/m/20221006003920.6xlqaoccxwisza5k@awork3.anarazel.de
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
|
|
We got rid of the need for them in 4f5f485d10c and 846e91e0223.
Discussion: https://postgr.es/m/20220915022626.5xx3ccgkzpkqw5mq@awork3.anarazel.de
|
|
Unfortunately xlc 12.1 and earlier don't support -qvisibility. Therefore
be7c15b194a doesn't suffice to make extension libraries work without the
explicit mkldexport step removed in fe6a64a58ab. While 12.1 is EOL, there is
some desire to leave buildfarm animals using it run a bit longer. But instead
of adding back the complicated mkldexport step, we can use -Wl,-b,expfull to
force all symbols to be exported.
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2490844.1663123546@sss.pgh.pa.us
|
|
It looks like icc and sunpro both support -fvisibility=hidden and xlc supports
-qvisibility=hidden. I tested this on AIX and solaris with their proprietary
compilers as well as gcc, and with gcc or clang on freebsd, linux, macos,
netbsd and openbsd.
Apparently my prior commit fe6a64a58ab only works in combination with this
patch. While I tried to test them separately, an unknown caching issue
prevented me from noticing the problem.
Per discussion with Tom Lane and buildfarm member hoverfly.
Discussion: https://postgr.es/m/20220910052741.t7w7csyrggwus2ze%40awork3.anarazel.de
Discussion: https://postgr.es/m/20220820174213.d574qde4ptwdzoqz@awork3.anarazel.de
|
|
SUSv3 <netinet/in.h> defines struct sockaddr_in6, and all targeted Unix
systems have it. Windows has it in <ws2ipdef.h>. Remove the configure
probe, the macro and a small amount of dead code.
Also remove a mention of IPv6-less builds from the documentation, since
there aren't any.
This is similar to commits f5580882 and 077bf2f2 for Unix sockets. Even
though AF_INET6 is an "optional" component of SUSv3, there are no known
modern operating system without it, and it seems even less likely to be
omitted from future systems than AF_UNIX.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
|
|
Remove four probes for members of sockaddr_storage. Keep only the probe
for sockaddr's sa_len, which is enough for our two remaining places that
know about _len fields:
1. ifaddr.c needs to know if sockaddr has sa_len to understand the
result of ioctl(SIOCGIFCONF). Only AIX is still using the relevant code
today, but it seems like a good idea to keep it compilable on Linux.
2. ip.c was testing for presence of ss_len to decide whether to fill in
sun_len in our getaddrinfo_unix() function. It's just as good to test
for sa_len. If you have one, you have them all.
(The code in #2 isn't actually needed at all on several OSes I checked
since modern versions ignore sa_len on input to system calls. Proving
that's the case for all relevant OSes is left for another day, but
wouldn't get rid of that last probe anyway if we still want it for #1.)
Discussion: https://postgr.es/m/CA%2BhUKGJJjF2AqdU_Aug5n2MAc1gr%3DGykNjVBZq%2Bd6Jrcp3Dyvg%40mail.gmail.com
|
|
They're not referenced, so we don't need them in in pg_config.h.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: http://postgr.es/m/e0c44fb2-8b66-a4b9-b274-7ed3a1a0ab74@enterprisedb.com
|
|
configure extracts TCL_SHLIB_LD_LIBS from tclConfig.sh, and puts the
value into Makefile.global, but then we never use it anywhere. It
looks like I removed the only usage in cd75f94da, but didn't notice
that it was the only usage. Might as well mop this up while we're
trying to get rid of unnecessary configure steps.
Discussion: https://postgr.es/m/2442359.1660835043@sss.pgh.pa.us
|
|
<netinet/tcp.h> is in SUSv3 and all targeted Unix systems have it.
For Windows, we can provide a stub include file, to avoid some #ifdef
noise.
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
|
|
On BSD-family systems, header <sys/sockio.h> defines socket ioctl
numbers like SIOCGIFCONF. Only AIX is using those now, but it defines
them in <net/if.h> anyway.
Supposing some PostgreSQL hacker wants to test that AIX-only code path
on a more common development system by pretending not to have
getifaddrs(). It's enough to include <sys/ioctl.h>, at least on macOS,
FreeBSD and Linux, and we're already doing that.
|
|
<net/if.h> is in SUSv3 and all targeted Unixes have it. It's used in a
region that is already ifdef'd out for Windows. We're not using it for
any standard definitions, but it's where AIX defines conventional socket
ioctl numbers.
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
|
|
It was only used by src/port/getaddrinfo.c, removed by the previous
commit.
Discussion: https://postgr.es/m/CA%2BhUKGJFLPCtAC58EAimF6a6GPw30TU_59FUY%3DGWB_kC%3DJEmVQ%40mail.gmail.com
|
|
SUSv3, all targeted Unixes and modern Windows have getaddrinfo() and
related interfaces. Drop the replacement implementation, and adjust
some headers slightly to make sure that the APIs are visible everywhere
using standard POSIX headers and names.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
<sys/socket.h> provides sockaddr_storage in SUSv3 and all targeted Unix
systems have it. Windows has it too.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
Assume that we can use LWARX hint flags and the LWSYNC instruction
on any PPC machine. The check on the assembler's behavior was only
needed for Apple's old assembler, which is no longer of interest
now that we've de-supported all PPC-era versions of macOS (thanks
to them not having clock_gettime()). Also, given an up-to-date
assembler these instructions work even on Apple's old hardware.
It seems quite unlikely that anyone would be interested in running
current Postgres on PPC hardware that's so old as to not have
these instructions.
Hence, rip out associated configure test and manual configuration
options, and just use the modernized instructions all the time.
Also, update atomics/arch-ppc.h to use these instructions as well.
(It was already using LWSYNC unconditionally in another place,
providing further proof that nobody is using PG on hardware old
enough to have a problem with that.)
Discussion: https://postgr.es/m/166622.1660323391@sss.pgh.pa.us
|
|
This was needed only by HP-UX 10, so it became redundant with commit
9db300ce.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
<sys/resource.h> is in SUSv2 and is on all targeted Unix systems. We
have a replacement for getrusage() on Windows, so let's just move its
declarations into src/include/port/win32/sys/resource.h so that we can
use a standard-looking #include. Also remove an obsolete reference to
CLK_TCK. Also rename src/port/getrusage.c to win32getrusage.c,
following the convention for Windows-only fallback code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
These are in SUSv2 and every targeted Unix system has them. It's not
hard to avoid including them on Windows system because they're mostly
used in platform-specific translation units.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
<sys/select.h> is in SUSv3 and every targeted Unix system has it.
Provide an empty header in src/include/port/win32 so that we can
include it unguarded even on Windows.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
<sys/un.h> is in SUSv3 and every targeted Unix has it. Some Windows
tool chains may still lack the approximately equivalent header
<afunix.h>, so we already defined struct sockaddr_un ourselves on that
OS for now. To harmonize things a bit, move our definition into a new
header src/include/port/win32/sys/un.h.
HAVE_UNIX_SOCKETS is now defined unconditionally. We migh remove that
in a separate commit, pending discussion.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
<sys/uio.h> is in SUSv2, and all targeted Unix system have it, so we
might as well drop the probe (in fact we never really needed this one).
It's where struct iovec is defined, and as a common extension, it's also
where non-standard preadv() and pwritev() are declared on systems that
have them.
We should also be able to assume that IOV_MAX is defined on Unix.
To spell out what our pg_iovec.h header does for the OSes in the build
farm as of today:
Windows: our own struct and functions
Solaris, Cygwin: <sys/uio.h>'s struct, our own functions
Every other Unix: <sys/uio.h>'s struct and functions
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
At some point in the past some headers (net/if.h on some BSDs in 2009,
netinet/tcp.h on IRIX in 2000, sys/ucred.h in 2013 on then older openbsd),
only compiled if other heades were included first, complicating configure
tests. More recent tests indicate that that's not required anymore.
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220807012914.ydz73yte6j3coulo@awork3.anarazel.de
|
|
We've relied on it being present for msvc for ages...
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220807012914.ydz73yte6j3coulo@awork3.anarazel.de
|
|
Previously we fell back to __FUNCTION__ and then NULL. As __func__ is in C99
that shouldn't be necessary anymore.
Solution.pm defined HAVE_FUNCNAME__FUNCTION instead of
HAVE_FUNCNAME__FUNC (originating in 4164e6636e2), as at some point in the past
MSVC only supported __FUNCTION__. Our minimum version supports __func__.
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220807012914.ydz73yte6j3coulo@awork3.anarazel.de
|
|
strtof() is in C99 and all targeted systems have it. We can remove the
configure probe and some dead code, but we still need replacement code
for a couple of systems that have known buggy implementations selected
via platform template.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/152683.1659830125%40sss.pgh.pa.us
|
|
There's no known supported system needing 1 argument gettimeofday()
support. The test for it was added a long time ago (92c6bf9775b). Remove.
Until now we tested whether a gettimeofday() fallback is needed when
targetting windows. Which lead to the odd result that HAVE_GETTIMEOFDAY only
being defined when targetting MinGW (which has gettimeofday() since at least
2007). As the fallback is specific to msvc, remove the configure code and
rename src/port/gettimeofday.c to src/port/win32gettimeofday.c.
While at it, also remove the definition of struct timezone, a forward
declaration of the struct is sufficient.
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220806000311.ywx65iuchvj4qn2k@awork3.anarazel.de
|
|
strtoll was backfilled with either __strtoll or strtoq on systems without
strtoll. The last such system on the buildfarm was an ancient HP-UX animal. We
don't support HP-UX anymore, so remove.
On other systems strtoll was present, but did not have a declaration. The last
known instance on the buildfarm was running an ancient OSX and shut down in
2019.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220804013546.h65najrzig764jar@awork3.anarazel.de
|
|
fdatasync() is in SUSv2, and all targeted Unix systems have it. We have
a replacement function for Windows.
We retain the probe for the function declaration, which allows us to
supply the mysteriously missing declaration for macOS, and also for
Windows. No need to keep a HAVE_FDATASYNC macro around.
Also rename src/port/fdatasync.c to win32fdatasync.c since it's only for
Windows.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGJZJVO%3DiX%2Beb-PXi2_XS9ZRqnn_4URh0NUQOwt6-_51xQ%40mail.gmail.com
|
|
clock_gettime() is in SUSv2 and all targeted Unix systems have it.
Remove a chunk of fallback code for old Unix is no longer reachable on
modern systems, and untested as of the retirement of build farm animal
prairiedog.
There is no need to retain a HAVE_CLOCK_GETTIME macro here, because it
is already used in a context with Unix and Windows code paths.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
|
|
preadv() and pwritev() are not standardized by POSIX, but appeared in
NetBSD in 1999 and were adopted by at least OpenBSD, FreeBSD,
DragonFlyBSD, Linux, AIX, illumos and macOS. We don't use them much
yet, but an active proposal uses them heavily.
In 15, we had two replacement implementations for other OSes: one based
on lseek() + -v function if available for true vector I/O, and the other
based on a loop over p- function.
The former would be an obstacle to hypothetical future multi-threaded
code sharing file descriptors, while the latter would not, since commit
cf112c12. Furthermore, the number of targeted systems that could
benefit from the former's potential upside has dwindled to just one
niche OS, since macOS added the functions and we de-supported HP-UX.
That doesn't seem like a good trade-off.
Therefore, drop the lseek()-based variant, and also the pg_ prefix now
that the file position portability hazard is gone.
At the time of writing, the only systems in our build farm that lack
native preadv/pwritev and thus use fallback code are:
* Solaris (but not illumos)
* macOS before release 11.0
* Windows
With this commit, the above systems will now use the *same* fallback
code, the version that loops over pread()/pwrite(). Windows already
used that (though a later proposal may include true vector I/O for
Windows), so this decision really only affects Solaris, until it gets
around to adding these system calls.
Also remove some useless includes while here.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
|
|
pread() and pwrite() are in SUSv2, and all targeted Unix systems have
them.
Previously, we defined pg_pread and pg_pwrite to emulate these function
with lseek() on old Unixen. The names with a pg_ prefix were a reminder
of a portability hazard: they might change the current file position.
That hazard is gone, so we can drop the prefixes.
Since the remaining replacement code is Windows-only, move it into
src/port/win32p{read,write}.c, and move the declarations into
src/include/port/win32_port.h.
No need for vestigial HAVE_PREAD, HAVE_PWRITE macros as they were only
used for declarations in port.h which have now moved into win32_port.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
|
|
setenv() and unsetenv() are in SUSv3 and targeted Unix systems have
them. We still need special code for these on Windows, but that doesn't
require a configure probe.
This marks the first time we require a SUSv3 (POSIX.1-2001) facility
(rather than SUSv2). The replacement code removed here was not needed
on any targeted system or any known non-EOL'd Unix system, and was
therefore dead and untested.
No need for vestigial HAVE_SETENV and HAVE_UNSETENV macros, because we
provide a replacement for Windows, and we didn't previously test the
macros.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Greg Stark <stark@mit.edu>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
|
