| Age | Commit message (Collapse) | Author |
|---|
|
|
|
perltidy run not included.
|
|
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
|
|
Ultra-modern versions of the perl Data::Dumper module have apparently
changed how they indent output. Instead of trying to keep up we choose
to tell it to supporess all indentation in the hstore_plperl regression
tests.
Backpatch to 9.5 where this feature was introduced.
|
|
The snapshot assembly during the creation of logical slots relied
waiting for transactions in xl_running_xacts to end, by checking for
their commit/abort records. Unfortunately, despite locking, it is
possible to see an xl_running_xact record listing transactions as
ready, that have already WAL-logged an commit/abort record, as the
locking just prevents the ProcArray to be adjusted, and the commit
record has to be logged first.
That lead to either delayed or hanging snapshot creation, because
snapbuild.c would wait "forever" to see commit/abort records for some
transactions. That hang resolved only if a xl_running_xacts record
without any running transactions happened to be logged, far from
certain on a busy server.
It's impractical to prevent that via more heavyweight locking, the
likelihood of deadlocks and significantly increased contention would
be too big.
Instead change the initial snapshot creation to be solely based on
tracking the oldest running transaction via
xl_running_xacts->oldestRunningXid - that actually ends up
significantly simplifying the code. That has two disadvantages:
1) Because we cannot fully "trust" the contents of xl_running_xacts,
we cannot use it to build the initial snapshot. Instead we have to
wait twice for all running transactions to finish.
2) Previously a slot, unless the race occurred, could be created when
the all transaction perceived as running based on commit/abort
records, now we have to wait for the next xl_running_xacts record.
To address that, trigger logging new xl_running_xacts record from
within snapbuild.c exactly when necessary.
Unfortunately snabuild.c's SnapBuild is stored on disk, one of the
stupider ideas of a certain Mr Freund, so we can't change it in a
minor release. As this is going to be backpatched, we have to hack
around a bit to keep on-disk compatibility. A later commit will
rejigger that on master.
Author: Andres Freund, based on a quite different patch from Petr Jelinek
Analyzed-By: Petr Jelinek
Reviewed-By: Petr Jelinek
Discussion: https://postgr.es/m/f37e975c-908f-858e-707f-058d3b1eb214@2ndquadrant.com
Backpatch: 9.4-, where logical decoding has been introduced
|
|
The mess cleaned up in commit da0759600 is clear evidence that it's a
bug hazard to expect the caller of get_attstatsslot()/free_attstatsslot()
to provide the correct type OID for the array elements in the slot.
Moreover, we weren't even getting any performance benefit from that,
since get_attstatsslot() was extracting the real type OID from the array
anyway. So we ought to get rid of that requirement; indeed, it would
make more sense for get_attstatsslot() to pass back the type OID it found,
in case the caller isn't sure what to expect, which is likely in binary-
compatible-operator cases.
Another problem with the current implementation is that if the stats array
element type is pass-by-reference, we incur a palloc/memcpy/pfree cycle
for each element. That seemed acceptable when the code was written because
we were targeting O(10) array sizes --- but these days, stats arrays are
almost always bigger than that, sometimes much bigger. We can save a
significant number of cycles by doing one palloc/memcpy/pfree of the whole
array. Indeed, in the now-probably-common case where the array is toasted,
that happens anyway so this method is basically free. (Note: although the
catcache code will inline any out-of-line toasted values, it doesn't
decompress them. At the other end of the size range, it doesn't expand
short-header datums either. In either case, DatumGetArrayTypeP would have
to make a copy. We do end up using an extra array copy step if the element
type is pass-by-value and the array length is neither small enough for a
short header nor large enough to have suffered compression. But that
seems like a very acceptable price for winning in pass-by-ref cases.)
Hence, redesign to take these insights into account. While at it,
convert to an API in which we fill a struct rather than passing a bunch
of pointers to individual output arguments. That will make it less
painful if we ever want further expansion of what get_attstatsslot can
pass back.
It's certainly arguable that this is new development and not something to
push post-feature-freeze. However, I view it as primarily bug-proofing
and therefore something that's better to have sooner not later. Since
we aren't quite at beta phase yet, let's put it in.
Discussion: https://postgr.es/m/16364.1494520862@sss.pgh.pa.us
|
|
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
|
|
Storing passwords in plaintext hasn't been a good idea for a very long
time, if ever. Now seems like a good time to finally forbid it, since we're
messing with this in PostgreSQL 10 anyway.
Remove the CREATE/ALTER USER UNENCRYPTED PASSSWORD 'foo' syntax, since
storing passwords unencrypted is no longer supported. ENCRYPTED PASSWORD
'foo' is still accepted, but ENCRYPTED is now just a noise-word, it does
the same as just PASSWORD 'foo'.
Likewise, remove the --unencrypted option from createuser, but accept
--encrypted as a no-op for backward compatibility. AFAICS, --encrypted was
a no-op even before this patch, because createuser encrypted the password
before sending it to the server even if --encrypted was not specified. It
added the ENCRYPTED keyword to the SQL command, but since the password was
already in encrypted form, it didn't make any difference. The documentation
was not clear on whether that was intended or not, but it's moot now.
Also, while password_encryption='on' is still accepted as an alias for
'md5', it is now marked as hidden, so that it is not listed as an accepted
value in error hints, for example. That's not directly related to removing
'plain', but it seems better this way.
Reviewed by Michael Paquier
Discussion: https://www.postgresql.org/message-id/16e9b768-fd78-0b12-cfc1-7b6b7f238fde@iki.fi
|
|
|
|
components.
This fixes a pgxc_ctl crash reported by Tomas, but it also makes sense because
GTM details must be added to configuration files of other components while
adding them.
In passing also fix problems while calling "clean/stop all" on non existing GTM
master.
|
|
precendence over the defaults.
As reported quite a while back by Tobias Oberstein, this bug remained
unaddressed for too long. This commit should fix and ensure that the values
supplied via gtmPxyExtraConfig are honored correctly.
|
|
Objects in an extension are shippable to a foreign server if the
extension is part of the foreign server definition's shippable
extensions list. But this was not properly considered in some cases
when checking whether a join condition can be pushed to a foreign server
and the join condition uses an object from a shippable extension. So
the join would never be pushed down in those cases.
So, the list of extensions needs to be made available in fpinfo of the
relation being considered to be pushed down before any expressions are
assessed for being shippable. Fix foreign_join_ok() to do that for a
join relation.
The code to save FDW options in fpinfo is scattered at multiple places.
Bring all of that together into functions apply_server_options(),
apply_table_options(), and merge_fdw_options().
David Rowley and Ashutosh Bapat, per report from David Rowley
|
|
This addresses the new warning types -Wformat-truncation
-Wformat-overflow that are part of -Wall, via -Wformat, in GCC 7.
|
|
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
|
|
Commit 9e43e8714 turns out to have been insufficient: not only is it
necessary to track tentative parent links while considering a set of
arc removals, but it's necessary to track tentative flag additions
as well. This is because we always merge arc target states into
arc source states; therefore, when considering a merge of the final
state with some other, it is the other state that will acquire a new
TSTATE_FIN bit. If there's another arc for the same color trigram
that would cause merging of that state with the initial state, we
failed to recognize the problem. The test cases for the prior commit
evidently only exercised situations where a tentative merge with the
initial state occurs before one with the final state. If it goes the
other way around, we'll happily merge the initial and final states,
either producing a broken final graph that would never match anything,
or triggering the Assert added by the prior commit.
It's tempting to consider switching the merge direction when the merge
involves the final state, but I lack the time to analyze that idea in
detail. Instead just keep track of the flag changes that would result
from proposed merges, in the same way that the prior commit tracked
proposed parent links.
Along the way, add some more debugging support, because I'm not entirely
confident that this is the last bug here. And tweak matters so that
the transformed.dot file uses small integers rather than pointer values
to identify states; that makes it more readable if you're just eyeballing
it rather than fooling with Graphviz. And rename a couple of identically
named struct fields to reduce confusion.
Per report from Corey Csuhta. Add a test case based on his example.
(Note: this case does not trigger the bug under 9.3, apparently because
its different measurement of costs causes it to stop merging states before
it hits the failure. I spent some time trying to find a variant that would
fail in 9.3, without success; but I'm sure such cases exist.)
Like the previous patch, back-patch to 9.3 where this code was added.
Report: https://postgr.es/m/E2B01A4B-4530-406B-8D17-2F67CF9A16BA@csuhta.com
|
|
Author: Alexander Law <exclusion@gmail.com>
|
|
regexport.c thought it could just ignore LACON arcs, but the correct
behavior is to treat them as satisfiable while consuming zero input
(rather reminiscently of commit 9f1e642d5). Otherwise, the emitted
simplified-NFA representation may contain no paths leading from initial
to final state, which unsurprisingly confuses pg_trgm, as seen in
bug #14623 from Jeff Janes.
Since regexport's output representation has no concept of an arc that
consumes zero input, recurse internally to find the next normal arc(s)
after any LACON transitions. We'd be forced into changing that
representation if a LACON could be the last arc reaching the final
state, but fortunately the regex library never builds NFAs with such
a configuration, so there always is a next normal arc.
Back-patch to 9.3 where this logic was introduced.
Discussion: https://postgr.es/m/20170413180503.25948.94871@wrigleys.postgresql.org
|
|
Hash indexes can contain both pages which are all-zeroes (i.e.
PageIsNew()) and pages which have been initialized but currently
aren't used. The latter category can happen either when a page
has been reserved but not yet used or when it is used for a time
and then freed. pgstattuple was only prepared to deal with the
pages that are actually-zeroes, which it called zero_pages.
Rename the column to unused_pages (extension version 1.5 is
as-yet-unreleased) and make it count both kinds of unused pages.
Along the way, slightly tidy up the way we test for pages of
various types.
Robert Haas and Ashutosh Sharma, reviewed by Amit Kapila
Discussion: http://postgr.es/m/CAE9k0PkTtKFB3YndOyQMjwuHx+-FtUP1ynK8E-nHtetoow3NtQ@mail.gmail.com
|
|
Commit 0bf3ae88a encountered a need to pass the finally chosen remote qual
conditions forward from postgresGetForeignPlan to postgresPlanDirectModify.
It solved that by sticking them into the plan node's fdw_private list,
which in hindsight was a pretty bad idea. In the first place, there's no
use for those qual trees either in EXPLAIN or execution; indeed they could
never safely be used for any post-planning purposes, because they would not
get processed by setrefs.c. So they're just dead weight to carry around in
the finished plan tree, plus being an attractive nuisance for somebody who
might get the idea that they could be used that way. Secondly, because
those qual trees (sometimes) contained RestrictInfos, they created a
plan-transmission hazard for parallel query, which is how come we noticed a
problem. We dealt with that symptom in commit 28b047875, but really a more
straightforward and more efficient fix is to pass the data through in a new
field of struct PgFdwRelationInfo. So do it that way. (There's no need
to revert 28b047875, as it has sufficient reason to live anyway.)
Per fuzz testing by Andreas Seltenreich.
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
|
|
Clauses in the lists retained by postgres_fdw during planning were
sometimes bare boolean clauses, sometimes RestrictInfos, and sometimes
a mixture of the two in the same list. The comment about that situation
didn't come close to telling the full truth, either. Aside from being
confusing, this had a couple of bad practical consequences:
* waste of planning cycles due to inability to cache per-clause selectivity
and cost estimates;
* sometimes, RestrictInfos would sneak into the fdw_private list of a
finished Plan node, causing failures if, for example, we tried to ship
the Plan tree to a parallel worker.
(It may well be that it's a bug in the parallel-query logic that we
would ever try to ship such a plan to a parallel worker, but in any
case this deserves to be cleaned up.)
To fix, rearrange so that clause lists in PgFdwRelationInfo are always
lists of RestrictInfos, and then strip the RestrictInfos at the last
minute when making a Plan node. In passing do a bit of refactoring and
comment cleanup in postgresGetForeignPlan and foreign_join_ok.
Although the messiness here dates back at least to 9.6, there's no evidence
that it causes anything worse than wasted planning cycles in 9.6, so no
back-patch for now.
Per fuzz testing by Andreas Seltenreich.
Tom Lane and Ashutosh Bapat
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
|
|
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
|
|
|
|
In commit 25542d77, regression test coverage was added to sepgsql
for partitioned tables. Unfortunately it was not robust in the face
of collation differences, per the buildfarm. Force "C" collation
in order to fix that.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
|
|
The new partitioned table capability added a new relkind, namely
RELKIND_PARTITIONED_TABLE. Update sepgsql to treat this new relkind
exactly the same way it does RELKIND_RELATION.
In addition, add regression test coverage for partitioned tables.
Issue raised by Stephen Frost and initial patch by Mike Palmiotto.
Review by Tom Lane and Robert Haas, and editorializing by me.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
|
|
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
|
|
Instead of allocating memory in brin_deform_tuple and brin_copy_tuple
over and over during a scan, allow reuse of previously allocated memory.
This is said to make for a measurable performance improvement.
Author: Jinyu Zhang, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/495deb78.4186.1500dacaa63.Coremail.beijing_pg@163.com
|
|
Discussion: https://postgr.es/m/CAKJS1f9yurJQW9pdnzL+rmOtsp2vOytkpXKGnMFJEO-qz5O5eA@mail.gmail.com
|
|
At -Og optimization gcc warns that variable tclass may be used
uninitialized when relkind == RELKIND_INDEX. Actually that can't
happen due to an early return, but quiet the compiler by initializing
tclass to 0.
In passing, use uint16_t consistently for the declaration of tclass.
Complaint and initial patch by Mike Palmiotto. Editorializing by me.
Probably not worth backpatching given that it is cosmetic, so apply
to development head only.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
|
|
<selinux/label.h> includes <stdbool.h>, which creates an incompatible
We don't care if <stdbool.h> redefines "true"/"false"; those are close
enough.
Complaint and initial patch by Mike Palmiotto. Final approach per
Tom Lane's suggestion, as discussed on hackers. Backpatching to
all supported branches.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
|
|
Using AclResult as a bool or vice versa works by accident, but it's
unusual and possibly confusing style, so write it out more explicitly.
|
|
Follow on patch in the multi-variate statistics patch series.
CREATE STATISTICS s1 WITH (dependencies) ON (a, b) FROM t;
ANALYZE;
will collect dependency stats on (a, b) and then use the measured
dependency in subsequent query planning.
Commit 7b504eb282ca2f5104b5c00b4f05a3ef6bb1385b added
CREATE STATISTICS with n-distinct coefficients. These are now
specified using the mutually exclusive option WITH (ndistinct).
Author: Tomas Vondra, David Rowley
Reviewed-by: Kyotaro HORIGUCHI, Álvaro Herrera, Dean Rasheed, Robert Haas
and many other comments and contributions
Discussion: https://postgr.es/m/56f40b20-c464-fad2-ff39-06b668fac47c@2ndquadrant.com
|
|
Make every page in a hash index which isn't all-zeroes have a valid
special space, so that tools like pageinspect don't error out.
Also, make pageinspect cope with all-zeroes pages, because
_hash_alloc_buckets can leave behind large numbers of those until
they're consumed by splits.
Ashutosh Sharma and Robert Haas, reviewed by Amit Kapila.
Original trouble report from Jeff Janes.
Discussion: http://postgr.es/m/CAMkU=1y6NjKmqbJ8wLMhr=F74WzcMALYWcVFhEpm7i=mV=XsOg@mail.gmail.com
|
|
suggested by Tom Lane
|
|
Author: Daniel Gustafsson <daniel@yesql.se>
|
|
Author: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
|
|
This was missed in a924c327 ff.
|
|
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507838733aba4748b514536af2d39d7f2.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
|
|
Currently, the only type of child relation is an "other member rel",
which is the child of a baserel, but in the future joins and even
upper relations may have child rels. To facilitate that, introduce
macros that test to test for particular RelOptKind values, and use
them in various places where they help to clarify the sense of a test.
(For example, a test may allow RELOPT_OTHER_MEMBER_REL either because
it intends to allow child rels, or because it intends to allow simple
rels.)
Also, remove find_childrel_top_parent, which will not work for a
child rel that is not a baserel. Instead, add a new RelOptInfo
member top_parent_relids to track the same kind of information in a
more generic manner.
Ashutosh Bapat, slightly tweaked by me. Review and testing of the
patch set from which this was taken by Rajkumar Raghuwanshi and Rafia
Sabih.
Discussion: http://postgr.es/m/CA+TgmoagTnF2yqR3PT2rv=om=wJiZ4-A+ATwdnriTGku1CLYxA@mail.gmail.com
|
|
Turned up by buildfarm animal rhinoceros. Fixing blind. Will have
to wait for next run by rhinoceros to know whether it worked.
|
|
A QueryEnvironment concept is added, which allows new types of
objects to be passed into queries from parsing on through
execution. At this point, the only thing implemented is a
collection of EphemeralNamedRelation objects -- relations which
can be referenced by name in queries, but do not exist in the
catalogs. The only type of ENR implemented is NamedTuplestore, but
provision is made to add more types fairly easily.
An ENR can carry its own TupleDesc or reference a relation in the
catalogs by relid.
Although these features can be used without SPI, convenience
functions are added to SPI so that ENRs can easily be used by code
run through SPI.
The initial use of all this is going to be transition tables in
AFTER triggers, but that will be added to each PL as a separate
commit.
An incidental effect of this patch is to produce a more informative
error message if an attempt is made to modify the contents of a CTE
from a referencing DML statement. No tests previously covered that
possibility, so one is added.
Kevin Grittner and Thomas Munro
Reviewed by Heikki Linnakangas, David Fetter, and Thomas Munro
with valuable comments and suggestions from many others
|
|
Don't import partitions. Do import partitioned tables which are
not themselves partitions.
Report by Stephen Frost. Design and patch by Michael Paquier,
reviewed by Amit Langote. Documentation revised by me.
Discussion: http://postgr.es/m/20170309141531.GD9812@tamriel.snowman.net
|
|
|
|
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
|
|
The V0 convention is failure prone because we've so far assumed that a
function is V0 if PG_FUNCTION_INFO_V1 is missing, leading to crashes
if a function was coded against the V1 interface. V0 doesn't allow
proper NULL, SRF and toast handling. V0 doesn't offer features that
V1 doesn't.
Thus remove V0 support and obsolete fmgr README contents relating to
it.
Author: Andres Freund, with contributions by Peter Eisentraut & Craig Ringer
Reviewed-By: Peter Eisentraut, Craig Ringer
Discussion: https://postgr.es/m/20161208213441.k3mbno4twhg2qf7g@alap3.anarazel.de
|
|
A later commit will remove V0 support.
Author: Andres Freund, with contributions by Craig Ringer
Reviewed-By: Peter Eisentraut, Craig Ringer
Discussion: https://postgr.es/m/20161208213441.k3mbno4twhg2qf7g@alap3.anarazel.de
|
|
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
|
|
The conname variable was not initialized in some code paths, resulting
in error reports referring to the "unnamed" connection rather than the
correct connection name.
Author: Rushabh Lathia <rushabh.lathia@gmail.com>
|
|
The trouble with the original choice here is that "?" is a valid (and
indeed used) operator name, so that you could end up with ambiguous
statement texts like "SELECT ? ? ?". With this patch, you instead
see "SELECT $1 ? $2", which seems significantly more readable.
The numbers used for this purpose begin after the last actual $N parameter
in the particular query. The conflict with external parameters has its own
potential for confusion of course, but it was agreed to be an improvement
over the previous behavior.
Lukas Fittl
Discussion: https://postgr.es/m/CAP53PkxeaCuwYmF-A4J5z2-qk5fYFo5_NH3gpXGJJBxv1DMwEw@mail.gmail.com
|
|
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
|
|
This extends the Aggregate node with two new features: HashAggregate
can now run multiple hashtables concurrently, and a new strategy
MixedAggregate populates hashtables while doing sorted grouping.
The planner will now attempt to save as many sorts as possible when
planning grouping sets queries, while not exceeding work_mem for the
estimated combined sizes of all hashtables used. No SQL-level changes
are required. There should be no user-visible impact other than the
new EXPLAIN output and possible changes to result ordering when ORDER
BY was not used (which affected a few regression tests). The
enable_hashagg option is respected.
Author: Andrew Gierth
Reviewers: Mark Dilger, Andres Freund
Discussion: https://postgr.es/m/87vatszyhj.fsf@news-spur.riddles.org.uk
|
