| Age | Commit message (Collapse) | Author |
|---|
|
Postgres-XL does not support FWD object, so the tests were failing
with "does not exist" errors, instead of testing that visibility on
FDW objects is not supported. So just remove the few test queries.
|
|
This could cause hash indexes to report greater than 100% free space.
Ashutosh Sharma, reviewed by Amit Kapila
Discussion: http://postgr.es/m/CAE9k0PnCKfg-ZK1CwGZJPF1yKcG2A=GUgC3BMdNMzLAXVOo4Eg@mail.gmail.com
|
|
Per a report from AP, it's not that hard to exhaust the supply of
bitmap pages if you create a table with a hash index and then insert a
few billion rows - and then you start getting errors when you try to
insert additional rows. In the particular case reported by AP,
there's another fix that we can make to improve recycling of overflow
pages, which is another way to avoid the error, but there may be other
cases where this problem happens and that fix won't help. So let's
buy ourselves as much headroom as we can without rearchitecting
anything.
The comments claim that the old limit was 64GB, but it was really
only 32GB, because we didn't use all the bits in the page for bitmap
bits - only the largest power of 2 that could fit after deducting
space for the page header and so forth. Thus, we have 4kB per page
for bitmap bits, not 8kB. The new limit is thus actually 8 times the
old *real* limit but only 4 times the old *purported* limit.
Since this breaks on-disk compatibility, bump HASH_VERSION. We've
already done this earlier in this release cycle, so this doesn't cause
any incremental inconvenience for people using pg_upgrade from
releases prior to v10. However, users who use pg_upgrade to reach
10beta3 or later from 10beta2 or earlier will need to REINDEX any hash
indexes again.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/20170704105728.mwb72jebfmok2nm2@zip.com.au
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
perltidy run not included.
|
|
Standardize on testing a hash index page's type by doing
(opaque->hasho_flag & LH_PAGE_TYPE) == LH_xxx_PAGE
Various places were taking shortcuts like
opaque->hasho_flag & LH_BUCKET_PAGE
which while not actually wrong, is still bad practice because
it encourages use of
opaque->hasho_flag & LH_UNUSED_PAGE
which *is* wrong (LH_UNUSED_PAGE == 0, so the above is constant false).
hash_xlog.c's hash_mask() contained such an incorrect test.
This also ensures that we mask out the additional flag bits that
hasho_flag has accreted since 9.6. pgstattuple's pgstat_hash_page(),
for one, was failing to do that and was thus actively broken.
Also fix assorted comments that hadn't been updated to reflect the
extended usage of hasho_flag, and fix some macros that were testing
just "(hasho_flag & bit)" to use the less dangerous, project-approved
form "((hasho_flag & bit) != 0)".
Coverity found the bug in hash_mask(); I noted the one in
pgstat_hash_page() through code reading.
|
|
Hash indexes can contain both pages which are all-zeroes (i.e.
PageIsNew()) and pages which have been initialized but currently
aren't used. The latter category can happen either when a page
has been reserved but not yet used or when it is used for a time
and then freed. pgstattuple was only prepared to deal with the
pages that are actually-zeroes, which it called zero_pages.
Rename the column to unused_pages (extension version 1.5 is
as-yet-unreleased) and make it count both kinds of unused pages.
Along the way, slightly tidy up the way we test for pages of
various types.
Robert Haas and Ashutosh Sharma, reviewed by Amit Kapila
Discussion: http://postgr.es/m/CAE9k0PkTtKFB3YndOyQMjwuHx+-FtUP1ynK8E-nHtetoow3NtQ@mail.gmail.com
|
|
Since hash indexes typically have very few overflow pages, adding a
new splitpoint essentially doubles the on-disk size of the index,
which can lead to large and abrupt increases in disk usage (and
perhaps long delays on occasion). To mitigate this problem to some
degree, divide larger splitpoints into four equal phases. This means
that, for example, instead of growing from 4GB to 8GB all at once, a
hash index will now grow from 4GB to 5GB to 6GB to 7GB to 8GB, which
is perhaps still not as smooth as we'd like but certainly an
improvement.
This changes the on-disk format of the metapage, so bump HASH_VERSION
from 2 to 3. This will force a REINDEX of all existing hash indexes,
but that's probably a good idea anyway. First, hash indexes from
pre-10 versions of PostgreSQL could easily be corrupted, and we don't
want to confuse corruption carried over from an older release with any
corruption caused despite the new write-ahead logging in v10. Second,
it will let us remove some backward-compatibility code added by commit
293e24e507838733aba4748b514536af2d39d7f2.
Mithun Cy, reviewed by Amit Kapila, Jesper Pedersen and me. Regression
test outputs updated by me.
Discussion: http://postgr.es/m/CAD__OuhG6F1gQLCgMQNnMNgoCvOLQZz9zKYJQNYvYmmJoM42gA@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoYty0jCf-pa+m+vYUJ716+AxM7nv_syvyanyf5O-L_i2A@mail.gmail.com
|
|
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables
Top level role - pg_monitor includes all of the above by default, plus others
Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
|
|
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
|
|
Replace ignoreVacuum parameter with more flexible flags.
Author: Eiji Seki
Review: Haribabu Kommi
|
|
The warning about hash indexes not being write-ahead logged and their
use being discouraged has been removed. "snapshot too old" is now
supported for tables with hash indexes. Most importantly, barring
bugs, hash indexes will now be crash-safe and usable on standbys.
This commit doesn't yet add WAL consistency checking for hash
indexes, as we now have for other index types; a separate patch has
been submitted to cure that lack.
Amit Kapila, reviewed and slightly modified by me. The larger patch
series of which this is a part has been reviewed and tested by Álvaro
Herrera, Ashutosh Sharma, Mark Kirkwood, Jeff Janes, and Jesper
Pedersen.
Discussion: http://postgr.es/m/CAA4eK1JOBX=YU33631Qh-XivYXtPSALh514+jR8XeD7v+K3r_Q@mail.gmail.com
|
|
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
|
|
Pointed out by Michael Paquier
|
|
The contrib extensions pageinspect, pg_visibility and pgstattuple only
work against regular relations which have storage. They don't work
against foreign tables, partitioned (parent) tables, views, et al.
Add checks to the user-callable functions to return a useful error
message to the user if they mistakenly pass an invalid relation to a
function which doesn't accept that kind of relation.
In passing, improve some of the existing checks to use ereport() instead
of elog(), add a function to consolidate common checks where
appropriate, and add some regression tests.
Author: Amit Langote, with various changes by me
Reviewed by: Michael Paquier and Corey Huinker
Discussion: https://postgr.es/m/ab91fd9d-4751-ee77-c87b-4dd704c1e59c@lab.ntt.co.jp
|
|
Since pgstattuple v1.5 hasn't been released yet, no need for a new
extension version. The new function exposes statistics about hash
indexes similar to what other pgstatindex functions return for other
index types.
Ashutosh Sharma, reviewed by Kuntal Ghosh. Substantial further
revisions by me.
|
|
This avoids that builtins.h has to include additional header files.
|
|
|
|
It's currently necessary to take a heavyweight lock when scanning a
hash bucket, but pgstattuple only examines individual pages, so it
doesn't need to do this. If, for some hypothetical reason, it did
need to do any heavyweight locking here, this logic would probably
still be incorrect, because most of the locks that it is taking are
meaningless. Only a heavyweight lock on a primary bucket page has any
meaning, but this takes heavyweight locks on all pages regardless of
function - and in particular overflow pages, where you might imagine
that we'd want to lock the primary bucket page if we needed to lock
anything at all.
This is arguably a bug that has existed since this code was added in
commit dab42382f483c3070bdce14a4d93c5d0cf61e82b, but I'm not going to
bother back-patching it because in most cases the only consequence is
that running pgstattuple() on a hash index is a little slower than it
otherwise might be, which is no big deal.
Extracted from a vastly larger patch by Amit Kapila which heavyweight
locking for hash indexes entirely; analysis of why this can be done
independently of the rest by me.
|
|
Now that we track initial privileges on extension objects and changes to
those permissions, we can drop the superuser() checks from the various
functions which are part of the pgstattuple extension and rely on the
GRANT system to control access to those functions.
Since a pg_upgrade will preserve the version of the extension which
existed prior to the upgrade, we can't simply modify the existing
functions but instead need to create new functions which remove the
checks and update the SQL-level functions to use the new functions
(and to REVOKE EXECUTE rights on those functions from PUBLIC).
Thanks to Tom and Andres for adding support for extensions to follow
update paths (see: 40b449a), allowing this patch to be much smaller
since no new base version script needed to be included.
Approach suggested by Noah.
Reviewed by Michael Paquier.
|
|
Extension scripts should never use CREATE OR REPLACE for initial object
creation. If there is a collision with a pre-existing (probably
user-created) object, we want extension installation to fail, not silently
overwrite the user's object. Bloom and sslinfo both violated this precept.
Also fix a number of scripts that had no standard header (the file name
comment and the \echo...\quit guard). Probably the \echo...\quit hack
is less important now than it was in 9.1 days, but that doesn't mean
that individual extensions get to choose whether to use it or not.
And fix a couple of evident copy-and-pasteos in file name comments.
No need for back-patch: the REPLACE bugs are both new in 9.6, and the
rest of this is pretty much cosmetic.
Andreas Karlsson and Tom Lane
|
|
All functions provided by this extension are PARALLEL SAFE.
Andreas Karlsson
|
|
CHECK_PAGE_OFFSET_RANGE() has been unused forever.
CHECK_RELATION_BLOCK_RANGE() has been unused in pgstatindex.c ever since
bt_page_stats() and bt_page_items() functions were moved from pgstattuple
to pageinspect module. It still exists in pageinspect/btreefuncs.c.
Daniel Gustafsson
|
|
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
|
|
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
|
|
|
|
The new bit indicates whether every tuple on the page is already frozen.
It is cleared only when the all-visible bit is cleared, and it can be
set only when we vacuum a page and find that every tuple on that page is
both visible to every transaction and in no need of any future
vacuuming.
A future commit will use this new bit to optimize away full-table scans
that would otherwise be triggered by XID wraparound considerations. A
page which is merely all-visible must still be scanned in that case, but
a page which is all-frozen need not be. This commit does not attempt
that optimization, although that optimization is the goal here. It
seems better to get the basic infrastructure in place first.
Per discussion, it's very desirable for pg_upgrade to automatically
migrate existing VM forks from the old format to the new format. That,
too, will be handled in a follow-on patch.
Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit
Kapila, Simon Riggs, Andres Freund, and others, and substantially
revised by me.
|
|
Dead or half-dead index leaf pages were incorrectly reported as live, as a
consequence of a code rearrangement I made (during a moment of severe brain
fade, evidently) in commit d287818eb514d431.
The index metapage was not counted in index_size, causing that result to
not agree with the actual index size on-disk.
Index root pages were not counted in internal_pages, which is inconsistent
compared to the case of a root that's also a leaf (one-page index), where
the root would be counted in leaf_pages. Aside from that inconsistency,
this could lead to additional transient discrepancies between the reported
page counts and index_size, since it's possible for pgstatindex's scan to
see zero or multiple pages marked as BTP_ROOT, if the root moves due to
a split during the scan. With these fixes, index_size will always be
exactly one page more than the sum of the displayed page counts.
Also, the index_size result was incorrectly documented as being measured in
pages; it's always been measured in bytes. (While fixing that, I couldn't
resist doing some small additional wordsmithing on the pgstattuple docs.)
Including the metapage causes the reported index_size to not be zero for
an empty index. To preserve the desired property that the pgstattuple
regression test results are platform-independent (ie, BLCKSZ configuration
independent), scale the index_size result in the regression tests.
The documentation issue was reported by Otsuka Kenji, and the inconsistent
root page counting by Peter Geoghegan; the other problems noted by me.
Back-patch to all supported branches, because this has been broken for
a long time.
|
|
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
|
|
Backpatch certain files through 9.1
|
|
Also this patch removes obsolete comment.
Back-patch to 9.5 where BRIN index was added.
|
|
|
|
The new function allows to estimate bloat and other table level statics
in a faster, but approximate, way. It does so by using information from
the free space map for pages marked as all visible in the visibility
map. The rest of the table is actually read and free space/bloat is
measured accurately. In many cases that allows to get bloat information
much quicker, causing less IO.
Author: Abhijit Menon-Sen
Reviewed-By: Andres Freund, Amit Kapila and Tomas Vondra
Discussion: 20140402214144.GA28681@kea.toroid.org
|
|
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
|
|
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
|
|
Report by Robert Haas
|
|
This function continued to use it after heap_endscan() freed it. In
passing, don't explicit create a strategy here. Instead, use the one
created by heap_beginscan_strat(), if any. Back-patch to 9.2, where use
of a BufferAccessStrategy here was introduced.
|
|
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
|
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
|
|
GIN posting lists are now encoded using varbyte-encoding, which allows them
to fit in much smaller space than the straight ItemPointer array format used
before. The new encoding is used for both the lists stored in-line in entry
tree items, and in posting tree leaf pages.
To maintain backwards-compatibility and keep pg_upgrade working, the code
can still read old-style pages and tuples. Posting tree leaf pages in the
new format are flagged with GIN_COMPRESSED flag, to distinguish old and new
format pages. Likewise, entry tree tuples in the new format have a
GIN_ITUP_COMPRESSED flag set in a bit that was previously unused.
This patch bumps GIN_CURRENT_VERSION from 1 to 2. New indexes created with
version 9.4 will therefore have version number 2 in the metapage, while old
pg_upgraded indexes will have version 1. The code treats them the same, but
it might be come handy in the future, if we want to drop support for the
uncompressed format.
Alexander Korotkov and me. Reviewed by Tomas Vondra and Amit Langote.
|
|
|
|
Tuples belonging to uncommitted transactions should not be
counted as dead.
This is arguably a bug fix that should be back-patched, but
as no one ever noticed until it came time to try to get rid
of SnapshotNow, I'm only doing this in master for now.
|
|
This allows us to specify the target relation with several expressions,
'relname', 'schemaname.relname' and OID in all pgstattuple functions.
pgstatindex() and pg_relpages() could not accept OID as the argument
so far.
Per discussion on -hackers, we decided to keep two types of interfaces,
with regclass-type and TEXT-type argument, for each pgstattuple
function because of the backward-compatibility issue. The functions
which have TEXT-type argument will be deprecated in the future release.
Patch by Satoshi Nagayasu, reviewed by Rushabh Lathia and Fujii Masao.
|
|
This is the first run of the Perl-based pgindent script. Also update
pgindent instructions.
|
|
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
|
|
Fujii Masao, reviewed by Kyotaro Horiguchi.
|
|
Per recent discussion on pgsql-hackers, these messages are too
chatty for most users.
|
|
This may have been important at some point in the past, but it no
longer does anything useful.
Review by Tom Lane.
|
