| Age | Commit message (Collapse) | Author |
|---|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
perltidy run not included.
|
|
suggested by Tom Lane
|
|
The conname variable was not initialized in some code paths, resulting
in error reports referring to the "unnamed" connection rather than the
correct connection name.
Author: Rushabh Lathia <rushabh.lathia@gmail.com>
|
|
From: David Rowley <david.rowley@2ndquadrant.com>
|
|
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
|
|
When using unnamed connections with dblink, every time a new
connection is made, the old one is leaked. Fix that.
This has been an issue probably since dblink was first committed.
Someone complained almost ten years ago, but apparently I decided
not to pursue it at the time, and neither did anyone else, so it
slipped between the cracks. Now that someone else has complained,
fix in all supported branches.
Discussion: (orig) https://postgr.es/m/flat/F680AB59-6D6F-4026-9599-1BE28880273D%40decibel.org#F680AB59-6D6F-4026-9599-1BE28880273D@decibel.org
Discussion: (new) https://postgr.es/m/flat/0A3221C70F24FB45833433255569204D1F6ADF8C@G01JPEXMBYT05
Reported by: Jim Nasby and Takayuki Tsunakawa
|
|
For consistency with other code and to avoid wasting some small amount
of memory.
From: Tsunakawa, Takayuki <tsunakawa.takay@jp.fujitsu.com>
|
|
Also remove some unused code and the no longer useful dblink.h file.
Reviewed-by: Tsunakawa, Takayuki <tsunakawa.takay@jp.fujitsu.com>
|
|
PQerrorMessage() returns an error message with a trailing newline, but
in backend use (dblink, postgres_fdw, libpqwalreceiver), we want to have
the error message without that for emitting via ereport(). To simplify
that, add a function pchomp() that returns a pstrdup'ed string with the
trailing newline characters removed.
|
|
This avoids that builtins.h has to include additional header files.
|
|
|
|
When libpq encounters a connection-level error, e.g. runs out of memory
while forming a result, there will be no error associated with PGresult,
but a message will be placed into PGconn's error buffer. postgres_fdw
takes care to use the PGconn error message when PGresult does not have
one, but dblink has been negligent in that regard. Modify dblink to mirror
what postgres_fdw has been doing.
Back-patch to all supported branches.
Author: Joe Conway
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/02fa2d90-2efd-00bc-fefc-c23c00eb671e%40joeconway.com
|
|
When dblink uses a postgres_fdw server name for its connection, it
is possible for the connection to have options that are invalid
with dblink (e.g. "updatable"). The recommended way to avoid this
problem is to use dblink_fdw servers instead. However there are use
cases for using postgres_fdw, and possibly other FDWs, for dblink
connection options, therefore protect against trying to use any
options that do not apply by using is_valid_dblink_option() when
building the connection string from the options.
Back-patch to 9.3. Although 9.2 supports FDWs for connection info,
is_valid_dblink_option() did not yet exist, and neither did
postgres_fdw, at least in the postgres source tree. Given the lack
of previous complaints, fixing that seems too invasive/not worth it.
Author: Corey Huinker
Reviewed-By: Joe Conway
Discussion: https://postgr.es/m/CADkLM%3DfWyXVEyYcqbcRnxcHutkP45UHU9WD7XpdZaMfe7S%3DRwA%40mail.gmail.com
|
|
When dblink or postgres_fdw detects an error on the remote side of the
connection, it will try to construct a local error message as best it
can using libpq's PQresultErrorField(). When no primary message is
available, it was bailing out with an unhelpful "unknown error". Make
that message better and more style guide compliant. Per discussion
on hackers.
Backpatch to 9.2 except postgres_fdw which didn't exist before 9.3.
Discussion: https://postgr.es/m/19872.1482338965%40sss.pgh.pa.us
|
|
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
|
|
It's not ready yet, revert two commits
690c543550b0d2852060c18d270cdb534d339d9a - unstable test output
386e3d7609c49505e079c40c65919d99feb82505 - patch itself
|
|
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
|
|
Backpatch certain files through 9.1
|
|
Some fields of the sinfo struct are modified within PG_TRY and then
referenced within PG_CATCH, so as with recent patch to async.c, "volatile"
is necessary for strict POSIX compliance; and that propagates to a couple
of subroutines as well as materializeQueryResult() itself. I think the
risk of actual issues here is probably higher than in async.c, because
storeQueryResult() is likely to get inlined into materializeQueryResult(),
leaving the compiler free to conclude that its stores into sinfo fields are
dead code.
|
|
Backpatch certain files through 9.0
|
|
This is further infrastructure for parallelism.
Amit Khandekar, Noah Misch, Robert Haas
|
|
dblink uses a short-lived data conversion memory context. However it
was not deleted when no longer needed, leading to a noticeable memory
leak under some circumstances. Plug the hole, along with minor
refactoring. Backpatch to 9.2 where the leak was introduced.
Report and initial patch by MauMau. Reviewed/modified slightly by
Tom Lane and me.
|
|
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
|
|
Previous commit e5de601267d98c5d60df6de8d436685c7105d149 modified dblink
to ensure client encoding matched the server. However the added
PQsetClientEncoding() call added significant overhead. Restore original
performance in the common case where client encoding already matches
server encoding by doing nothing in that case. Applies to all active
branches.
Issue reported and work sponsored by Zonar Systems.
|
|
This shaves a few cycles, and generally seems like good programming
practice.
David Rowley
|
|
SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
|
|
This is the first run of the Perl-based pgindent script. Also update
pgindent instructions.
|
|
If the remote database's settings of these GUCs are different from ours,
ambiguous datetime values may be read incorrectly. To fix, temporarily
adopt the remote server's settings while we ingest a query result.
This is not a complete fix, since it doesn't do anything about ambiguous
values in commands sent to the remote server; but there seems little we
can do about that end of it given dblink's entirely textual API for
transmitted commands.
Back-patch to 9.2. The hazard exists in all versions, but this patch
would need more work to apply before 9.2. Given the lack of field
complaints about this issue, it doesn't seem worth the effort at present.
Daniel Farina and Tom Lane
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
dblink now has its own validator function dblink_fdw_validator(), which is
better than the core function postgresql_fdw_validator() because it gets
the list of legal options from libpq instead of having a hard-wired list.
Make the dblink extension module provide a standard foreign data wrapper
dblink_fdw that encapsulates use of this validator, and recommend use of
that wrapper instead of making up wrappers on the fly.
Unfortunately, because ad-hoc wrappers *were* recommended practice
previously, it's not clear when we can get rid of postgresql_fdw_validator
without causing upgrade problems. But this is a step in the right
direction.
Shigeru Hanada, reviewed by KaiGai Kohei
|
|
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
|
|
Evidently I failed to test a compile after my earlier header shuffling.
|
|
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2ee7026948962cd61c4cd84a2d052772, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
|
|
commit-fest.
|
|
Noted by Guillaume Smet.
|
|
Josh Kupershmidt
|
|
This patch provides a test case for libpq's row processor API.
contrib/dblink can deal with very large result sets by dumping them into
a tuplestore (which can spill to disk) --- but until now, the intermediate
storage of the query result in a PGresult meant memory bloat for any large
result. Now we use a row processor to convert the data to tuple form and
dump it directly into the tuplestore.
A limitation is that this only works for plain dblink() queries, not
dblink_send_query() followed by dblink_get_result(). In the latter
case we don't know the desired tuple rowtype soon enough. While hack
solutions to that are possible, a different user-level API would
probably be a better answer.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
|
|
dblink_exec leaked temporary database connections if any error occurred
after connection setup, for example
SELECT dblink_exec('...connect string...', 'select 1/0');
Add a PG_TRY block to ensure PQfinish gets done when it is needed.
(dblink_record_internal is on the hairy edge of needing similar treatment,
but seems not to be actively broken at the moment.)
Also, in 9.0 and up, only one of the three functions using tuplestore
return mode was properly checking that the query context would allow
a tuplestore result.
Noted while reviewing dblink patch. Back-patch to all supported branches.
|
|
The DBLINK_GET_CONN and DBLINK_GET_NAMED_CONN macros did not set the
surrounding function's conname variable, causing errors to be incorrectly
reported as having occurred on the "unnamed" connection in some cases.
This bug was actually visible in two cases in the regression tests,
but apparently whoever added those cases wasn't paying attention.
Noted by Kyotaro Horiguchi, though this is different from his proposed
patch.
Back-patch to 8.4; 8.3 does not have the same type of error reporting
so the patch is not relevant.
|
|
|
|
|
|
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
|
|
This lets us stop including rel.h into execnodes.h, which is a widely
used header.
|
|
use DBLINK_GET_NAMED_CONN rather than DBLINK_GET_CONN.
Problem found by Peter Eisentraut and patch by Fujii Masao.
|
|
|
