| Age | Commit message (Collapse) | Author |
|---|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Backpatch to all supported versions, where applicable, to make backpatching
of future fixes go more smoothly.
Josh Soref
Discussion: https://www.postgresql.org/message-id/CACZqfqCf+5qRztLPgmmosr-B0Ye4srWzzw_mo4c_8_B_mtjmJQ@mail.gmail.com
|
|
I'd supposed that people would do this manually when creating new operator
classes, but the folly of that was exposed today. The tests seem fast
enough that we can just apply them during the normal regression tests.
contrib/isn fails the checks for lack of complete sets of cross-type
operators. That's a nice-to-have policy rather than a functional
requirement, so leave it as-is, but insert ORDER BY in the query to
ensure consistent cross-platform output.
Discussion: https://postgr.es/m/7076.1480446837@sss.pgh.pa.us
|
|
It's always been possible to create a zero-dimensional cube by converting
from a zero-length float8 array, but cube_in failed to accept the '()'
representation that cube_out produced for that case, resulting in a
dump/reload hazard. Make it accept the case. Also fix a couple of
other places that didn't behave sanely for zero-dimensional cubes:
cube_size would produce 1.0 when surely the answer should be 0.0,
and g_cube_distance risked a divide-by-zero failure.
Likewise, it's always been possible to create cubes containing float8
infinity or NaN coordinate values, but cube_in couldn't parse such input,
and cube_out produced platform-dependent spellings of the values. Convert
them to use float8in_internal and float8out_internal so that the behavior
will be the same as for float8, as we recently did for the core geometric
types (cf commit 50861cd68). As in that commit, I don't pretend that this
patch fixes all insane corner-case behaviors that may exist for NaNs, but
it's a step forward.
(This change allows removal of the separate cube_1.out and cube_3.out
expected-files, as the platform dependency that previously required them
is now gone: an underflowing coordinate value will now produce an error
not plus or minus zero.)
Make errors from cube_in follow project conventions as to spelling
("invalid input syntax for cube" not "bad cube representation")
and errcode (INVALID_TEXT_REPRESENTATION not SYNTAX_ERROR).
Also a few marginal code cleanups and comment improvements.
Tom Lane, reviewed by Amul Sul
Discussion: <15085.1472494782@sss.pgh.pa.us>
|
|
Commit 749a787c5b25ae33b3d4da0ef12aa05214aa73c7 bumped the extension
version on all of these extensions already, and we haven't had a
release since then, so we can make further changes without bumping the
extension version again. Take this opportunity to mark all of the
functions exported by these modules PARALLEL SAFE -- except for
pg_trgm's set_limit(). Mark that one PARALLEL RESTRICTED, because it
makes a persistent change to a GUC value.
Note that some of the markings added by this commit don't have any
effect; for example, gseg_picksplit() isn't likely to be mentioned
explicitly in a query and therefore it's parallel-safety marking will
never be consulted. But this commit just marks everything for
consistency: if it were somehow used in a query, that would be fine as
far as parallel query is concerned, since it does not consult any
backend-private state, attempt to write data, etc.
Andreas Karlsson, with a few revisions by me.
|
|
In commits 9ff60273e35cad6e and dbe2328959e12701 I (tgl) fixed the
signatures of a bunch of contrib's GIN and GIST support functions so that
they would pass validation by the recently-added amvalidate functions.
The backend does not actually consult or check those signatures otherwise,
so I figured this was basically cosmetic and did not require an extension
version bump. However, Alexander Korotkov pointed out that that would
leave us in a pretty messy situation if we ever wanted to redefine those
functions later, because there wouldn't be a unique way to name them.
Since we're going to be bumping these extensions' versions anyway for
parallel-query cleanups, let's take care of this now.
Andreas Karlsson, adjusted for more search-path-safety by me
|
|
The conventions specified by the GiST SGML documentation were widely
ignored. For example, the strategy-number argument for "consistent" and
"distance" functions is specified to be a smallint, but most of the
built-in support functions declared it as an integer, and for that matter
the core code passed it using Int32GetDatum not Int16GetDatum. None of
that makes any real difference at runtime, but it's quite confusing for
newcomers to the code, and it makes it very hard to write an amvalidate()
function that checks support function signatures. So let's try to instill
some consistency here.
Another similar issue is that the "query" argument is not of a single
well-defined type, but could have different types depending on the strategy
(corresponding to search operators with different righthand-side argument
types). Some of the functions threw up their hands and declared the query
argument as being of "internal" type, which surely isn't right ("any" would
have been more appropriate); but the majority position seemed to be to
declare it as being of the indexed data type, corresponding to a search
operator with both input types the same. So I've specified a convention
that that's what to do always.
Also, the result of the "union" support function actually must be of the
index's storage type, but the documentation suggested declaring it to
return "internal", and some of the functions followed that. Standardize
on telling the truth, instead.
Similarly, standardize on declaring the "same" function's inputs as
being of the storage type, not "internal".
Also, somebody had forgotten to add the "recheck" argument to both
the documentation of the "distance" support function and all of their
SQL declarations, even though the C code was happily using that argument.
Clean that up too.
Fix up some other omissions in the docs too, such as documenting that
union's second input argument is vestigial.
So far as the errors in core function declarations go, we can just fix
pg_proc.h and bump catversion. Adjusting the erroneous declarations in
contrib modules is more debatable: in principle any change in those
scripts should involve an extension version bump, which is a pain.
However, since these changes are purely cosmetic and make no functional
difference, I think we can get away without doing that.
|
|
Commit 33bd250f6c4cc309f4eeb657da80f1e7743b3e5c could have done with
some more review:
Adjust coding so that compilers unfamiliar with elog/ereport don't complain
about uninitialized values.
Fix misuse of PG_GETARG_INT16 to retrieve arguments declared as "integer"
at the SQL level. (This was evidently copied from cube_ll_coord and
cube_ur_coord, but those were wrong too.)
Fix non-style-guide-conforming error messages.
Fix underparenthesized if statements, which pgindent would have made a
hash of, and remove some unnecessary parens elsewhere.
Run pgindent over new code.
Revise documentation: repeated accretion of more operators without any
rethinking of the text already there had left things in a bit of a mess.
Merge all the cube operators into one table and adjust surrounding text
appropriately.
David Rowley and Tom Lane
|
|
|
|
Introduce distance operators over cubes:
<#> taxicab distance
<-> euclidean distance
<=> chebyshev distance
Also add kNN support of those distances in GiST opclass.
Author: Stas Kelvich
|
|
Oskari Saarenmaa. Backpatch to stable branches where applicable.
|
|
For upcoming BRIN opclasses, it's convenient to have strategy numbers
defined in a single place. Since there's nothing appropriate, create
it. The StrategyNumber typedef now lives there, as well as existing
strategy numbers for B-trees (from skey.h) and R-tree-and-friends (from
gist.h). skey.h is forced to include stratnum.h because of the
StrategyNumber typedef, but gist.h is not; extensions that currently
rely on gist.h for rtree strategy numbers might need to add a new
A few .c files can stop including skey.h and/or gist.h, which is a nice
side benefit.
Per discussion:
https://www.postgresql.org/message-id/20150514232132.GZ2523@alvh.no-ip.org
Authored by Emre Hasegeli and Álvaro.
(It's not clear to me why bootscanner.l has any #include lines at all.)
|
|
This improves on commit bbfd7edae5aa5ad5553d3c7e102f2e450d4380d4 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
|
|
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
|
|
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
|
|
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
|
|
Prominent binaries already had this metadata. A handful of minor
binaries, such as pg_regress.exe, still lack it; efforts to eliminate
such exceptions are welcome.
Michael Paquier, reviewed by MauMau.
|
|
This reverts commit 45b7abe59e9485657ac9380f35d2d917dd0da25b.
It turns out that the %name-prefix syntax without "=" does not work
at all in pre-2.4 Bison. We are not prepared to make such a large
jump in minimum required Bison version just to suppress a warning
message in a version hardly any developers are using yet.
When 3.0 gets more popular, we'll figure out a way to deal with this.
In the meantime, BISONFLAGS=-Wno-deprecated is recommendable for
anyone using 3.0 who doesn't want to see the warning.
|
|
%name-prefix doesn't use an "=" sign according to the Bison docs, but it
silently accepted one anyway, until Bison 3.0. This was originally a
typo of mine in commit 012abebab1bc72043f3f670bf32e91ae4ee04bd2, and we
seem to have slavishly copied the error into all the other grammar files.
Per report from Vik Fearing; analysis by Peter Eisentraut.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
|
|
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
|
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
|
|
This shaves a few cycles, and generally seems like good programming
practice.
David Rowley
|
|
Previous commit modified the test case, but I didn't update cube.out
expected output file in previous commit because it was not needed by the
platforms I have easy access to. Buildfarm animal 'dugong', running
"Debian 4.0 icc 10.1.011 ia64", has now gone red because of that, so update
it now.
Also adjust cube_3.out. According to git history, it was added to support
64-bit MinGW. There is no such animal in the buildfarm, so I'm doing this
blindly, but it was added quite recently so maybe someone still cares.
|
|
If the lower left and upper right corners of a cube are the same, set a
flag in the cube header, and only store one copy of the coordinates. That
cuts the on-disk size into half for the common case that the cube datatype
is used to represent points rather than boxes.
The new format is backwards-compatible with the old one, so pg_upgrade
still works. However, to get the space savings, the data needs to be
rewritten. A simple VACUUM FULL or REINDEX is not enough, as the old
Datums will just be moved to the new heap/index as is. A pg_dump and
reload, or something similar like casting to text and back, will do the
trick.
This patch deliberately doesn't update all the alternative expected output
files, as I don't have access to machines that produce those outputs. I'm
not sure if they are still relevant, but if they are, the buildfarm will
tell us and produce the diff required to fix it. If none of the buildfarm
animals need them, they should be removed altogether.
Patch by Stas Kelvich.
|
|
These modules used the YYPARSE_PARAM macro, which has been deprecated
by the bison folk since 1.875, and which they finally removed in 3.0.
Adjust the code to use the replacement facility, %parse-param, which
is a much better solution anyway since it allows specification of the
type of the extra parser parameter. We can thus get rid of a lot of
unsightly casting.
Back-patch to all active branches, since somebody might try to build
a back branch with up-to-date tools.
|
|
Adrian Schreyer
|
|
|
|
In commit 71450d7fd6c7cf7b3e38ac56e363bff6a681973c, we added code to inform
suitably-intelligent compilers that ereport() doesn't return if the elevel
is ERROR or higher. This patch extends that to elog(), and also fixes a
double-evaluation hazard that the previous commit created in ereport(),
as well as reducing the emitted code size.
The elog() improvement requires the compiler to support __VA_ARGS__, which
should be available in just about anything nowadays since it's required by
C99. But our minimum language baseline is still C89, so add a configure
test for that.
The previous commit assumed that ereport's elevel could be evaluated twice,
which isn't terribly safe --- there are already counterexamples in xlog.c.
On compilers that have __builtin_constant_p, we can use that to protect the
second test, since there's no possible optimization gain if the compiler
doesn't know the value of elevel. Otherwise, use a local variable inside
the macros to prevent double evaluation. The local-variable solution is
inferior because (a) it leads to useless code being emitted when elevel
isn't constant, and (b) it increases the optimization level needed for the
compiler to recognize that subsequent code is unreachable. But it seems
better than not teaching non-gcc compilers about unreachability at all.
Lastly, if the compiler has __builtin_unreachable(), we can use that
instead of abort(), resulting in a noticeable code savings since no
function call is actually emitted. However, it seems wise to do this only
in non-assert builds. In an assert build, continue to use abort(), so that
the behavior will be predictable and debuggable if the "impossible"
happens.
These changes involve making the ereport and elog macros emit do-while
statement blocks not just expressions, which forces small changes in
a few call sites.
Andres Freund, Tom Lane, Heikki Linnakangas
|
|
Numerous flex and bison make rules have appeared in the source tree
over time, and they are all virtually identical, so we can replace
them by pattern rules with some variables for customization.
Users of pgxs will also be able to benefit from this.
|
|
The latter was already the dominant use, and it's preferable because
in C the convention is that intXX means XX bits. Therefore, allowing
mixed use of int2, int4, int8, int16, int32 is obviously confusing.
Remove the typedefs for int2 and int4 for now. They don't seem to be
widely used outside of the PostgreSQL source tree, and the few uses
can probably be cleaned up by the time this ships.
|
|
These are not touched by pgindent, so clean them up a bit manually.
|
|
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
|
|
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
|
|
|
|
builfarm member.
|
|
include dependencies.
Modify pgcompinclude to skip a common fcinfo error.
|
|
This is recommended in the flex manual, and there seems no good reason
not to use it everywhere.
|
|
Added a new option --extra-install to pg_regress to arrange installing
the respective contrib directory into the temporary installation.
This is currently not yet supported for Windows MSVC builds.
Updated the .gitignore files for contrib modules to ignore the
leftovers of a temp-install check run.
Changed the exit status of "make check" in a pgxs build (which still
does nothing) to 0 from 1.
Added "make check" in contrib to top-level "make check-world".
|
|
|
|
Backport to 9.0, we're not supporting this compiler on earlier releases.
|
|
It was never terribly consistent to use OR REPLACE (because of the lack of
comparable functionality for data types, operators, etc), and
experimentation shows that it's now positively pernicious in the extension
world. We really want a failure to occur if there are any conflicts, else
it's unclear what the extension-ownership state of the conflicted object
ought to be. Most of the time, CREATE EXTENSION will fail anyway because
of conflicts on other object types, but an extension defining only
functions can succeed, with bad results.
|
|
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK. But it's time to get some
buildfarm cycles on it.
sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.
Dimitri Fontaine and Tom Lane
|
|
This applies the fix for bug #5784 to remaining places where we wish
to reject nulls in user-supplied arrays. In all these places, there's
no reason not to allow a null bitmap to be present, so long as none of
the current elements are actually null.
I did not change some other places where we are looking at system catalog
entries or aggregate transition values, as the presence of a null bitmap
in such an array would be suspicious.
|
|
|
|
Alexander Korotkov
|
|
Also do some further work in the back branches, where quite a bit wasn't
covered by Magnus' original back-patch.
|
|
|
|
|
|
Two of these were pointed out by Erik Rijkers; the rest I found.
|
