diff options
Diffstat (limited to 'APPLICATION-MIB')
| -rw-r--r-- | APPLICATION-MIB | 441 |
1 files changed, 441 insertions, 0 deletions
diff --git a/APPLICATION-MIB b/APPLICATION-MIB new file mode 100644 index 0000000..021cf41 --- /dev/null +++ b/APPLICATION-MIB @@ -0,0 +1,441 @@ + APPLICATION-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-TYPE, Counter32, Gauge32 + FROM SNMPv2-SMI + mib-2 + FROM RFC1213-MIB + DisplayString, TimeStamp + FROM SNMPv2-TC; + + + -- Textual conventions + + -- DistinguishedName [5] is used to refer to objects in the + -- directory. + + DistinguishedName ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A Distinguished Name represented in accordance with + RFC1485." + SYNTAX DisplayString + + application MODULE-IDENTITY + LAST-UPDATED "9311280000Z" + ORGANIZATION "IETF Mail and Directory Management Working Group" + CONTACT-INFO + " Ned Freed + + Postal: Innosoft International, Inc. + 250 West First Street, Suite 240 + Claremont, CA 91711 + US + + Tel: +1 909 624 7907 + Fax: +1 909 621 5319 + + E-Mail: ned@innosoft.com" + DESCRIPTION + "The MIB module describing network service applications" + ::= { mib-2 27 } + + -- The basic applTable contains a list of the application + -- entities. + applTable OBJECT-TYPE + SYNTAX SEQUENCE OF ApplEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table holding objects which apply to all different + kinds of applications providing network services." + ::= {application 1} + + applEntry OBJECT-TYPE + SYNTAX ApplEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry associated with a network service application." + INDEX {applIndex} + ::= {applTable 1} + + ApplEntry ::= SEQUENCE { + applIndex + INTEGER, + applName + DisplayString, + applDirectoryName + DistinguishedName, + applVersion + DisplayString, + applUptime + TimeStamp, + applOperStatus + INTEGER, + applLastChange + TimeStamp, + applInboundAssociations + Gauge32, + applOutboundAssociations + Gauge32, + applAccumulatedInboundAssociations + Counter32, + applAccumulatedOutboundAssociations + Counter32, + applLastInboundActivity + TimeStamp, + applLastOutboundActivity + TimeStamp, + applRejectedInboundAssociations + Counter32, + applFailedOutboundAssociations + Counter32 + } + + applIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index to uniquely identify the network service + application." + ::= {applEntry 1} + + applName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name the network service application chooses to be + known by." + ::= {applEntry 2} + + applDirectoryName OBJECT-TYPE + SYNTAX DistinguishedName + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Distinguished Name of the directory entry where + static information about this application is stored. + An empty string indicates that no information about + the application is available in the directory." + ::= {applEntry 3} + + applVersion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of network service application software." + ::= {applEntry 4} + + applUptime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time the network service + application was last initialized. If the application was + last initialized prior to the last initialization of the + network management subsystem, then this object contains + a zero value." + ::= {applEntry 5} + + applOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + halted(3), + congested(4), + restarting(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the operational status of the network service + application. 'down' indicates that the network service is + not available. 'running' indicates that the network service + is operational and available. 'halted' indicates that the + service is operational but not available. 'congested' + indicates that the service is operational but no additional + inbound associations can be accomodated. 'restarting' + indicates that the service is currently unavailable but is + in the process of restarting and will be available soon." + ::= {applEntry 6} + + applLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time the network service + application entered its current operational state. If + the current state was entered prior to the last + initialization of the local network management subsystem, + then this object contains a zero value." + ::= {applEntry 7} + + applInboundAssociations OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current associations to the network service + application, where it is the responder. For dynamic single + threaded processes, this will be the number of application + instances." + ::= {applEntry 8} + + applOutboundAssociations OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current associations to the network service + application, where it is the initiator. For dynamic single + threaded processes, this will be the number of application + instances." + ::= {applEntry 9} + + applAccumulatedInboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of associations to the application entity + since application initialization, where it was the responder. + For dynamic single threaded processes, this will be the + number of application instances." + ::= {applEntry 10} + + applAccumulatedOutboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of associations to the application entity + since application initialization, where it was the initiator. + For dynamic single threaded processes, this will be the + number of application instances." + ::= {applEntry 11} + + applLastInboundActivity OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this application last + had an inbound association. If the last association + occurred prior to the last initialization of the network + subsystem, then this object contains a zero value." + ::= {applEntry 12} + + applLastOutboundActivity OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this application last + had an outbound association. If the last association + occurred prior to the last initialization of the network + subsystem, then this object contains a zero value." + ::= {applEntry 13} + + applRejectedInboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of inbound associations the application + entity has rejected, since application initialization." + ::= {applEntry 14} + + applFailedOutboundAssociations OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number associations where the application entity + is initiator and association establishment has failed, + since application initialization." + ::= {applEntry 15} + + + -- The assocTable augments the information in the applTable + -- with information about associations. Note that two levels + -- of compliance are specified below, depending on whether + -- association monitoring is mandated. + + assocTable OBJECT-TYPE + SYNTAX SEQUENCE OF AssocEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table holding a set of all active application + associations." + ::= {application 2} + + assocEntry OBJECT-TYPE + SYNTAX AssocEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry associated with an association for a network + service application." + INDEX {applIndex, assocIndex} + ::= {assocTable 1} + + AssocEntry ::= SEQUENCE { + assocIndex + INTEGER, + assocRemoteApplication + DisplayString, + assocApplicationProtocol + OBJECT IDENTIFIER, + assocApplicationType + INTEGER, + assocDuration + TimeStamp + } + + assocIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index to uniquely identify each association for a network + service application." + ::= {assocEntry 1} + + assocRemoteApplication OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name of the system running remote network service + application. For an IP-based application this should be + either a domain name or IP address. For an OSI application + it should be the string encoded distinguished name of the + managed object. For X.400(84) MTAs which do not have a + Distinguished Name, the RFC1327 [6] syntax + 'mta in globalid' should be used." + ::= {assocEntry 2} + + assocApplicationProtocol OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An identification of the protocol being used for the + application. For an OSI Application, this will be the + Application Context. For Internet applications, the IANA + maintains a registry of the OIDs which correspond to + well-known applications. If the application protocol is + not listed in the registry, an OID value of the form + {applTCPProtoID port} or {applUDProtoID port} are used for + TCP-based and UDP-based protocols, respectively. In either + case 'port' corresponds to the primary port number being + used by the protocol." + ::= {assocEntry 3} + + assocApplicationType OBJECT-TYPE + SYNTAX INTEGER { + ua-initiator(1), + ua-responder(2), + peer-initiator(3), + peer-responder(4)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This indicates whether the remote application is some type of + client making use of this network service (e.g. a User Agent) + or a server acting as a peer. Also indicated is whether the + remote end initiated an incoming connection to the network + service or responded to an outgoing connection made by the + local application." + ::= {assocEntry 4} + + assocDuration OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this association was + started. If this association started prior to the last + initialization of the network subsystem, then this + object contains a zero value." + ::= {assocEntry 5} + + + -- Conformance information + + applConformance OBJECT IDENTIFIER ::= {application 3} + + applGroups OBJECT IDENTIFIER ::= {applConformance 1} + applCompliances OBJECT IDENTIFIER ::= {applConformance 2} + + + -- Compliance statements + + applCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities + which implement the Network Services Monitoring MIB + for basic monitoring of network service applications." + MODULE -- this module + MANDATORY-GROUPS {applGroup} + ::= {applCompliances 1} + + assocCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities which + implement the Network Services Monitoring MIB for basic + monitoring of network service applications and their + associations." + MODULE -- this module + MANDATORY-GROUPS {applGroup, assocGroup} + ::= {applCompliances 2} + + -- Units of conformance + + applGroup OBJECT-GROUP + OBJECTS { + applName, applVersion, applUptime, applOperStatus, + applLastChange, applInboundAssociations, + applOutboundAssociations, applAccumulatedInboundAssociations, + applAccumulatedOutboundAssociations, applLastInboundActivity, + applLastOutboundActivity, applRejectedInboundAssociations, + applFailedOutboundAssociations} + STATUS current + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications." + ::= {applGroups 1} + + assocGroup OBJECT-GROUP + OBJECTS { + assocRemoteApplication, assocApplicationProtocol, + assocApplicationType, assocDuration} + STATUS current + DESCRIPTION + "A collection of objects providing basic monitoring of + network service applications' associations." + ::= {applGroups 2} + + + -- OIDs of the form {applTCPProtoID port} are intended to be used + -- for TCP-based protocols that don't have OIDs assigned by other + -- means. {applUDPProtoID port} serves the same purpose for + -- UDP-based protocols. In either case 'port' corresponds to + -- the primary port number being used by the protocol. For example, + -- assuming no other OID is assigned for SMTP, an OID of + -- {applTCPProtoID 25} could be used, since SMTP is a TCP-based + -- protocol that uses port 25 as its primary port. + + applTCPProtoID OBJECT IDENTIFIER ::= {application 4} + applUDPProtoID OBJECT IDENTIFIER ::= {application 5} + + END |