<?php
/*
disks.inc
part of FreeNAS (http://www.freenas.org)
Copyright (C) 2005-2007 Olivier Cochard-Labbé <olivier@freenas.org>.
All rights reserved.
Based on m0n0wall (http://m0n0.ch/wall)
Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
/* include all configuration functions */
require_once("functions.inc");
/* Mount all configured disks */
function disks_mount_all()
{
global $config, $g;
if ($g['booting'])
echo "Mounting Partitions... ";
/* For each device configured:*/
if (is_array($config['mounts']['mount'])) {
foreach ($config['mounts']['mount'] as $mount) {
/* Advanced Umount filesystem if not booting mode (mount edition)*/
if (!$g['booting'])
disks_umount_adv($mount);
/* mount filesystem */
disks_mount($mount);
}
}
if ($g['booting'])
echo "done\n";
return 0;
}
/* Mount using the configured mount given in parameter
Return 0 if sucessful, 1 if error */
function disks_mount($mount)
{
global $config, $g;
/* Create one directory for each device under mnt */
$mountname=escapeshellcmd($mount['sharename']);
@mkdir ("/mnt/$mountname",0777);
/* mount the filesystems */
$devname=escapeshellcmd($mount['fullname']);
/* check the fileystem only if there is a problem*/
/* This part is too stupid: I must read the FreBSD start script for use the same intelligent method for checking hard drive */
switch ($mount['fstype']) {
case "ufs":
if (mwexec("/sbin/mount -t ufs -o acls $devname /mnt/$mountname") == 0) {
/* Change this directory into 777 mode */
mwexec("/bin/chmod 777 /mnt/$mountname");
$result = 0;
}
else {
/* If it's NOK, Check filesystem and do a fsck, answer Yes to all question*/
mwexec("/sbin/fsck -y -t ufs $devname");
/* Re-try to mount the partition */
if (mwexec("/sbin/mount -t ufs -o acls $devname /mnt/$mountname") == 0) {
/* Change this directory into 777 mode */
mwexec("/bin/chmod 777 /mnt/$mountname");
$result = 0;
}
else {
/* Not OK, remove the directory, prevent writing on RAM disk*/
@rmdir ("/mnt/$mountname");
$result = 1;
}
}
break;
case "msdosfs":
if (mwexec("/sbin/mount_msdosfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0)
$result = 0;
else {
exec("/sbin/fsck -y -t msdosfs {$devname}");
if (mwexec("/sbin/mount_msdosfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
$result = 0;
}
else {
/* Not OK, remove the directory, prevent writing on RAM disk*/
@rmdir ("/mnt/$mountname");
$result = 1;
}
}
case "cd9660":
if (mwexec("/sbin/mount_cd9660 $devname /mnt/$mountname") == 0)
$result = 0;
else {
/* Not OK, remove the directory, prevent writing on RAM disk*/
@rmdir ("/mnt/$mountname");
$result = 1;
}
break;
case "ntfs":
if (mwexec("/sbin/mount_ntfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0)
$result = 0;
else {
/* Not OK, remove the directory, prevent writing on RAM disk */
@rmdir ("/mnt/$mountname");
$result = 1;
}
break;
case "ext2fs":
if (mwexec("/sbin/mount_ext2fs $devname /mnt/$mountname") == 0) {
/* Change this directory into 777 mode */
mwexec("/bin/chmod 777 /mnt/$mountname");
$result = 0;
}
else {
exec("/usr/local/sbin/e2fsck -f -p {$devname}");
if (mwexec("/sbin/mount_ext2fs $devname /mnt/$mountname") == 0) {
/* Change this directory into 777 mode */
mwexec("/bin/chmod 777 /mnt/$mountname");
$result = 0;
}
else {
/* Not OK, remove the directory, prevent writing on RAM */
@rmdir ("/mnt/$mountname");
$result= 1;
}
}
break;
}
return $result;
}
/* Mount using fullname (/dev/ad0s1) given in parameter*/
function disks_mount_fullname($fullname)
{
global $config;
if (is_array($config['mounts']['mount'])) {
// Search the mount list for given disk and partition
foreach($config['mounts']['mount'] as $mountk => $mountv) {
if($mountv['fullname'] == $fullname) {
$mount = $mountv;
}
}
}
if($mount) {
$result= disks_mount($mount);
}
else {
$result=0;
}
return $result;
}
/* Umount the specified configured mount point
Return 0 is successfull, 1 if error */
function disks_umount($mount)
{
/* The $mount variable is the all config table for the mount point */
$mountname = "/mnt/{$mount['sharename']}";
if (mwexec("/sbin/umount $mountname") == 0) {
if(@rmdir("$mountname"))
$result = 0;
else
$result = 1;
}
else
$result = 1;
return $result;
}
/* Advanced umount using fullname (/dev/ad01s1)
Return 0 if successfull, 1 if error */
function disks_umount_fullname($fullname)
{
global $config;
/* Search the mount list for given fullname */
foreach($config['mounts']['mount'] as $mountk => $mountv) {
if (strcmp($mountv['fullname'],$fullname) == 0) {
$mount = $mountv;
}
}
if($mount) {
$result = disks_umount($mount);
}
else {
$result= 1;
}
return $result;
}
/* Advanced unmount the specified mount point without using the sharename value
Used when changing the 'sharename': Need to umount the old unknow sharename
Return 0 if successful, 1 if error */
function disks_umount_adv($mount)
{
$fullname="{$mount['fullname']}";
// get the mount list
$detmount = get_mounts_list();
//Look for the mount point in all mounted point
foreach ($detmount as $detmountk => $detmountv) {
// If we found the mount point on the device
if (strcmp($detmountv['fullname'],$fullname) == 0) {
$mountname="{$detmountv['mp']}";
}
}
if ($mountname) {
exec("/sbin/umount $mountname");
@rmdir ("$mountname");
return 0;
}
else
$result = 1;
return $result;
}
// This option check if this fullname (/dev/ad0s1) is mounted
// Return 0 if not, 1 if yes
function disks_check_mount_fullname($fullname)
{
$detmount = get_mounts_list();
$status=0;
//print_r($detmount);
foreach ($detmount as $detmountk => $detmountv) {
if (strcmp($detmountv['fullname'],$fullname) == 0) {
$status=1;
break;
}
}
return $status;
}
/* This option check if the configured mount is mounted */
function disks_check_mount($mount)
{
return disks_check_mount_fullname($mount['fullname']);
}
/* This function check if the disk is mounted
Return 0 if not, 1 if yes */
function disks_check_mount_disk($disk)
{
$detmount = get_mounts_list();
$status=0;
foreach ($detmount as $detmountk => $detmountv) {
/* Must found the $disk (ad0) in result $mdisk (ad0s1) */
// strpos will return 0 (found at position 0) if found, must check the 'false' value
if (strpos($detmountv['mdisk'], $disk) !== false ) {
$status=1;
break;
}
}
return $status;
}
/* This option check if the configured disk is online (detected by the system)
Result: "MISSING", disk don't detected by OS
Result: "ONLINE", disk is online
Result: "CHANGED", disk have changed (be replaced ?) */
function disks_status($diskname)
{
global $config, $g;
//$detectedlist = get_physical_disks_list();
/* get All disk list (with CDROM) */
$detectedlist = array_merge((array)get_physical_disks_list(),(array)get_cdrom_list());
$status="MISSING";
foreach ($detectedlist as $detecteddisk => $detecteddiskv) {
if ($detecteddisk == $diskname['name']) {
$status="ONLINE";
if (($detecteddiskv['size'] != $diskname['size']) || ($detecteddiskv['desc'] != $diskname['desc'])) {
$status="CHANGED";
}
break;
}
}
return $status;
}
/* This function umount all configured mount */
function disks_umount_all()
{
// Unmount all mount point
global $config, $g;
/* Sync disks*/
mwexec("/bin/sync");
if (is_array($config['mounts']['mount'])) {
foreach ($config['mounts']['mount'] as $mountent) {
disks_umount($mountent);
}
}
return 0;
}
/* Configure, create and start gvinum volume */
function disks_raid_gvinum_configure()
{
global $config, $g;
/* Generate the raid.conf file */
if ($config['gvinum']['vdisk']) {
foreach ($config['gvinum']['vdisk'] as $a_raid_conf) {
if (file_exists($g['varrun_path'] . "/raid.conf.dirty") &&
!in_array("{$a_raid_conf['name']}\n",file($g['varrun_path'] . "/raid.conf.dirty"))) continue;
/* generate raid.conf */
$fd = fopen("{$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf", "w");
if (!$fd) {
printf("Error: cannot open raid.conf in services_raid_configure().\n");
return 1;
}
$raidconf="";
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
$raidconf .= <<<EOD
drive disk_{$diskrv} device {$diskrv}
EOD;
}
$raidconf .= <<<EOD
volume {$a_raid_conf['name']}
EOD;
switch ($a_raid_conf['type']) {
case "0":
$raidconf .= <<<EOD
plex org striped 256k
EOD;
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
/* Get the disksize */
$disksize=get_disks_size($diskrv);
/* Remove the ending 'B' in 'MB' */
$disksize=rtrim($disksize, 'B');
/* $raidconf .= <<<EOD
sd length {$disksize} drive disk_{$diskrv}
EOD; */
$raidconf .= <<<EOD
sd length 0 drive disk_{$diskrv}
EOD;
}
break;
case "1":
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
$raidconf .= <<<EOD
plex org concat
EOD;
/* Get the disksize */
$disksize=get_disks_size($diskrv);
/* Remove the ending 'B' in 'MB' */
$disksize=rtrim($disksize, 'B');
/* $raidconf .= <<<EOD
sd length {$disksize} drive disk_{$diskrv}
EOD; */
$raidconf .= <<<EOD
sd length 0 drive disk_{$diskrv}
EOD;
}
break;
case "5":
$raidconf .= <<<EOD
plex org raid5 256k
EOD;
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
/* Get the disksize */
$disksize=get_disks_size($diskrv);
/* Remove the ending 'B' in 'MB' */
$disksize=rtrim($disksize, 'B');
/* $raidconf .= <<<EOD
sd length {$disksize} drive disk_{$diskrv}
EOD; */
$raidconf .= <<<EOD
sd length 0 drive disk_{$diskrv}
EOD;
}
break;
}
fwrite($fd, $raidconf);
fclose($fd);
/* Create each volume */
mwexec("/sbin/gvinum create {$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf");
}
/* start each volume */
foreach ($config['gvinum']['vdisk'] as $a_raid_conf) {
exec("/sbin/gvinum lv $raidname",$rawdata);
if (strpos($rawdata[0],"State: up")>=0) continue;
mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
}
}
return 0;
}
/* Configure, create and start gmirror volume */
function disks_raid_gmirror_configure()
{
global $config, $g;
if ($config['gmirror']['vdisk']) {
// Load gmirror
mwexec("/sbin/gmirror load");
foreach ($config['gmirror']['vdisk'] as $a_raid_conf) {
/* Create each volume */
$cmd = "/sbin/gmirror label -b {$a_raid_conf['balance']} {$a_raid_conf['name']} ";
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
$cmd .= "{$diskrv} ";
}
mwexec($cmd);
}
}
return 0;
}
/* Configure, create and start gconcat volume */
function disks_raid_gconcat_configure()
{
global $config, $g;
if ($config['gconcat']['vdisk']) {
// Load gconcat
mwexec("/sbin/gconcat load");
foreach ($config['gconcat']['vdisk'] as $a_raid_conf) {
/* Create each volume */
$cmd = "/sbin/gconcat label {$a_raid_conf['name']} ";
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
$cmd .= "{$diskrv} ";
}
mwexec($cmd);
}
}
return 0;
}
/* Configure, create and start gstripe volume */
function disks_raid_gstripe_configure()
{
global $config, $g;
if ($config['gstripe']['vdisk']) {
// Load gstripe
mwexec("/sbin/gstripe load");
foreach ($config['gstripe']['vdisk'] as $a_raid_conf) {
/* Create each volume */
$cmd = "/sbin/gstripe label {$a_raid_conf['name']} ";
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
$cmd .= "{$diskrv} ";
}
mwexec($cmd);
}
}
return 0;
}
/* Configure, create and start graid5 volume */
function disks_raid_graid5_configure()
{
global $config, $g;
if ($config['graid5']['vdisk']) {
// Load graid5
mwexec("/sbin/graid5 load");
foreach ($config['graid5']['vdisk'] as $a_raid_conf) {
/* Create each volume */
$cmd = "/sbin/graid5 label -s 131072 {$a_raid_conf['name']} ";
foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
$cmd .= "{$diskrv} ";
}
mwexec($cmd);
}
}
return 0;
}
/* Start all geom RAID volumes */
function disks_raid_start()
{
global $config, $g;
/* WARNING: Must change this code for advanced RAID configuration ex: RAID1+0
Geom RAID volume must be started in 'intelligent' sort, for RAID1+0, gmirror must
be started before gstripe, etc... */
disks_raid_gvinum_start();
disks_raid_gmirror_start();
disks_raid_gstripe_start();
disks_raid_gconcat_start();
disks_raid_graid5_start();
return 0;
}
/* Start geom vinum volumes */
function disks_raid_gvinum_start()
{
global $config, $g;
if ($config['gvinum']['vdisk']) {
if ($g['booting'])
echo "Start gvinum raid... ";
/* start each volume */
foreach ($config['gvinum']['vdisk'] as $a_raid_conf) {
mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
}
if ($g['booting'])
echo "done\n";
}
return 0;
}
/* Start geom mirror volumes */
function disks_raid_gmirror_start()
{
global $config, $g;
/* Start Geom mirror */
if ($config['gmirror']['vdisk']) {
if ($g['booting'])
echo "Start gmirror raid... ";
// Load geom mirror module
mwexec("/sbin/gmirror load");
if ($g['booting'])
echo "done\n";
}
return 0;
}
/* Start geom concat volumes */
function disks_raid_gconcat_start()
{
global $config, $g;
/* Start Geom concat */
if ($config['gconcat']['vdisk']) {
if ($g['booting'])
echo "Start gconcat raid... ";
// Load geom concat module
mwexec("/sbin/gconcat load");
if ($g['booting'])
echo "done\n";
}
return 0;
}
/* Start geom stripe volumes */
function disks_raid_gstripe_start()
{
global $config, $g;
/* Start Geom stripe */
if ($config['gstripe']['vdisk']) {
if ($g['booting'])
echo "Start gstripe raid... ";
// Load geom stripe module
mwexec("/sbin/gstripe load");
if ($g['booting'])
echo "done\n";
}
return 0;
}
/* Start geom raid5 volumes */
function disks_raid_graid5_start()
{
global $config, $g;
/* Start Geom RAID5 */
if ($config['graid5']['vdisk']) {
if ($g['booting'])
echo "Start graid5 raid... ";
// Load geom raid5 module
mwexec("/sbin/graid5 load");
if ($g['booting'])
echo "done\n";
}
return 0;
}
/* Stop all geom RAID volumes */
function disks_raid_stop()
{
/* WARNING: Must change this code for advanced RAID configuration ex: RAID1+0
Geom RAID volume must be started in 'intelligent' sort, for RAID1+0, gmirror must
be started before gstripe, etc... */
disks_raid_gvinum_stop();
disks_raid_graid5_stop();
disks_raid_gstripe_stop();
disks_raid_gconcat_stop();
disks_raid_gmirror_stop();
return 0;
}
/* Stop all geom gvinum volumes */
function disks_raid_gvinum_stop()
{
global $config, $g;
/* Generate the raid.conf file */
if ($config['gvinum']['vdisk']) {
/* stop each volume */
foreach ($config['gvinum']['vdisk'] as $a_raid_conf) {
mwexec("/sbin/gvinum stop {$a_raid_conf['name']}");
}
}
return 0;
}
/* Stop all geom mirror volumes */
function disks_raid_gmirror_stop()
{
global $config, $g;
/* Stop geom mirror */
if ($config['gmirror']['vdisk']) {
/* start each volume */
foreach ($config['gmirror']['vdisk'] as $a_raid_conf) {
mwexec("/sbin/gmirror stop {$a_raid_conf['name']}");
}
}
return 0;
}
/* Stop all geom concat volumes */
function disks_raid_gconcat_stop()
{
global $config, $g;
/* Stop geom concat */
if ($config['gconcat']['vdisk']) {
/* start each volume */
foreach ($config['gconcat']['vdisk'] as $a_raid_conf) {
mwexec("/sbin/gconcat stop {$a_raid_conf['name']}");
}
}
return 0;
}
/* Stop all geom stripe volumes */
function disks_raid_gstripe_stop()
{
global $config, $g;
/* Stop geom stripe */
if ($config['gstripe']['vdisk']) {
/* start each volume */
foreach ($config['gstripe']['vdisk'] as $a_raid_conf) {
mwexec("/sbin/gstripe stop {$a_raid_conf['name']}");
}
}
return 0;
}
/* Stop all geom raid5 volumes */
function disks_raid_graid5_stop()
{
global $config, $g;
/* Generate the raid.conf file */
if ($config['graid5']['vdisk']) {
/* start each volume */
foreach ($config['graid5']['vdisk'] as $a_raid_conf) {
mwexec("/sbin/graid5 stop {$a_raid_conf['name']}");
}
}
return 0;
}
/* Delete geom gvinum volume given in parameter */
function disks_raid_gvinum_delete($raidname)
{
global $config, $g;
exec("/sbin/gvinum lv $raidname",$rawdata);
if (strpos($rawdata[0],"State: up") === false) {
return 0;
}
mwexec("/sbin/gvinum rm -r $raidname");
foreach ($config['gvinum']['vdisk'] as $a_raid) {
if ($a_raid['name'] == $raidname) {
foreach ($a_raid['diskr'] as $disk){
mwexec("/sbin/gvinum rm -r disk_{$disk}");
}
}
}
return 0;
}
/* Delete geom mirror volume given in parameter */
function disks_raid_gmirror_delete($raidname)
{
global $config, $g;
// Stop the volume
mwexec("/sbin/gmirror stop $raidname");
// Clear the gmirror information on the hard drive
foreach ($config['gmirror']['vdisk'] as $a_raid) {
if ($a_raid['name'] == $raidname) {
foreach ($a_raid['diskr'] as $disk) {
mwexec("/sbin/gmirror clear {$disk}");
}
}
}
return 0;
}
/* Delete geom concat volume given in parameter */
function disks_raid_gconcat_delete($raidname)
{
global $config, $g;
// Stop the volume
mwexec("/sbin/gconcat stop $raidname");
// Clear the gconcat information on the hard drive
foreach ($config['gconcat']['vdisk'] as $a_raid) {
if ($a_raid['name'] == $raidname) {
foreach ($a_raid['diskr'] as $disk) {
mwexec("/sbin/gconcat clear {$disk}");
}
mwexec("/sbin/gconcat destroy $raidname");
}
}
return 0;
}
/* Delete geom stripe volume given in parameter */
function disks_raid_gstripe_delete($raidname)
{
global $config, $g;
// Stop the volume
mwexec("/sbin/gstripe stop $raidname");
// Clear the gconcat information on the hard drive
foreach ($config['gstripe']['vdisk'] as $a_raid) {
if ($a_raid['name'] == $raidname) {
foreach ($a_raid['diskr'] as $disk) {
mwexec("/sbin/gstripe clear {$disk}");
}
mwexec("/sbin/gstripe destroy $raidname");
}
}
return 0;
}
/* Delete geom raid5 volume given in parameter */
function disks_raid_graid5_delete($raidname)
{
global $config, $g;
// Stop the volume
mwexec("/sbin/graid5 stop $raidname");
// The volume can disapear a few second after stop
sleep(2);
// Clear the graid5 information on the hard drive
foreach ($config['graid5']['vdisk'] as $a_raid) {
if ($a_raid['name'] == $raidname) {
foreach ($a_raid['diskr'] as $disk){
mwexec("/sbin/graid5 remove $raidname {$disk}");
}
mwexec("/sbin/graid5 destroy $raidname");
}
}
return 0;
}
/* Initialise HARD DRIVE for installation (creating 2 partition) */
function fdisk_hd_install($harddrive)
{
global $config, $g;
/* getting disk information */
$fdisk_info=fdisk_get_info($harddrive);
/* setting partition size to 32Mb*/
$part_freenas_size=32;
/* convert Mb to b */
$part_freenas_size=$part_freenas_size * 1024 * 1024;
$part1_size=$part_freenas_size / $fdisk_info['sec_size'];
$part2_size=$fdisk_info['total'] - $part1_size;
/* Create fdisk config file (fdisk.conf) */
$fd = fopen("{$g['varetc_path']}/fdisk.conf", "w");
if (!$fd) {
printf("Error: cannot open fdisk.conf in fdisk_hd_install().\n");
return 1;
}
$fdiskconf .= <<<EOD
g c{$fdisk_info['cyl']} h{$fdisk_info['head']} s{$fdisk_info['sect']}
p 1 165 1 $part1_size
p 2 165 $part1_size $part2_size
p 3 0 0 0
p 4 0 0 0
a 1
EOD;
fwrite($fd, $fdiskconf);
fclose($fd);
/* Fdisk the disk */
/* Warning: Ask two questions to the user */
mwexec("/sbin/fdisk -f {$g['varetc_path']}/fdisk.conf /dev/$harddrive");
return 0;
}
/* Return information about an harddrive given in parameter
$result['total'] : size
$result['cyl'] : cylinders
$result['head'] : heads
$result['sect'] : sectors/track
$result['sec_size'] : Media sector size
*/
function fdisk_get_info($harddrive)
{
global $config, $g;
exec("/sbin/fdisk /dev/$harddrive",$rawdata);
$result=array();
foreach ($rawdata as $line) {
/* separe the line by space or egal*/
$aline= preg_split("/[\s,]+|=/", $line);
$first_word = chop($aline[0]);
if ($aline[0] == "Media") {
$result['sec_size']=chop($aline[4]);
continue ;
}
if ($aline[0] == "cylinders") {
$result['cyl']=chop($aline[1]);
$result['head']=chop($aline[3]);
$result['sect']=chop($aline[5]);
continue ;
}
}
$result['total'] = $result['cyl'] * $result['head'] * $result['sect'] ;
return $result;
}
/* Is this function still used ??? */
function disks_bsdlabel($harddrive,$partition,$type)
{
global $config, $g;
// Generating BSD Label table
passthru("/sbin/bsdlabel " . escapeshellarg($harddrive) ."$partition > {$g['tmp_path']}/label.tmp");
// put this file on a array
$tableau = file("{$g['tmp_path']}/label.tmp");
// Open this file in add mode
$handle = fopen("{$g['tmp_path']}/label.tmp", 'a');
while(list(,$val) = each($tableau)) {
// If the line contain the word "unused"
// Why did I replace 'a' with 'c' ? Must found the URL where I found this information
if (ereg ("unused",$val)) {
// Replacing c: by a:
// Why ??? Must found the web page where I see this method
$val = ereg_replace ("c:","a:", $val);
// Peplacing unused by $type
$val = ereg_replace ("unused",$type, $val);
// Adding this line add the end of the file
fwrite($handle, $val);
}
}
// Closing file
fclose($handle);
// Injecting this new partition table
passthru("/sbin/bsdlabel -R -B " . escapeshellarg($harddrive) ."$partition {$g['tmp_path']}/label.tmp");
}
/* Set the ataidle tools parameters */
function disks_set_ataidle()
{
global $g, $config;
if (is_array($config['disks']['disk'])) {
foreach ($config['disks']['disk'] as $disk) {
if ($disk['type']=="IDE") {
/* If UDMA mode forced, launch atacontrol */
if (isset($disk['udma']) && ($disk['udma'] != "auto")) {
mwexec("/sbin/atacontrol mode {$disk['name']} {$disk['udma']}");
}
/* Don't use ataidle if all is disabled */
if (($disk['harddiskstandby'] == 0) && ($disk['apm'] == 0) && ($disk['acoustic'] == 0)) {
continue;
}
/* Found the channel and device number from the /dev name */
/* Divise the number by 2, the interger is the channel number, the rest is the device */
$value=trim($disk['name'],'ad');
$value=intval($value);
$channel = $value/2;
$device=$value % 2;
$channel=intval($channel);
$time=$disk['harddiskstandby'];
$apm=$disk['apm'];
$ac=$disk['acoustic'];
$cmd = "/usr/local/sbin/ataidle ";
if ($disk['acoustic'] != 0) {
$cmd .= "-A $ac ";
}
if ($disk['apm'] != 0) {
$cmd .= "-P $apm ";
}
if ($disk['harddiskstandby'] !=0) {
$cmd .= "-S $time ";
}
$cmd .= "$channel $device";
mwexec($cmd);
}
}
return 1;
}
return 0;
}
/*
Get list of partition information from disk.
Result is in the form:
[1] => Array
(
[start] => 31
[size] => 409169
[type] => 0xa5
[flags] => 0x80
)
Called in disks_manage_tools.php
*/
function disks_get_partition_info($disk)
{
exec("/sbin/fdisk -s {$disk}", $rawdata);
array_shift($rawdata);
array_shift($rawdata);
$result = array();
foreach($rawdata as $partinfo) {
$apartinfo = preg_split("/\s+/", $partinfo);
$partid = chop($apartinfo[1],":");
$result[$partid] = array();
$result[$partid]['start'] = chop($apartinfo[2]);
$result[$partid]['size'] = chop($apartinfo[3]);
$result[$partid]['type'] = chop($apartinfo[4]);
$result[$partid]['flags'] = chop($apartinfo[5]);
}
return $result;
}
?>
