FreeNAS Code

333 lines (309 with data), 10.3 kB

#!/bin/sh
#-
# Copyright (c) 2010, 2011 iXsystems, Inc., All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL Jordan Hubbard OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
#
# This file is heavily derived from both Sam Leffler's Avilia config,
# as well as the BSDRP project's config file.  Neither of these have
# an explicit copyright/license statement, but are implicitly BSDL.
#

# Where cust_pkg() finds packages to install
NANO_PACKAGE_DIR=${NANO_SRC}/${NANO_TOOLS}/Pkg
NANO_DATADIR=${NANO_OBJ}/_.data
NANO_DATASIZE=40960
NANO_INIT_IMG2=0
unset MAKEOBJDIRPREFIX

# Python version needs to be known when we are picking port vs package.  However,
# we've not yet created the make.conf.build file, nor setup things so that the nano
# vars for that are even defined.  To cope, export this globally.  We may be able
# to remove it from make.conf.build, but it doesn't hurt to have it there and
# may help.
export PYTHON_DEFAULT_VERSION=python2.7

# Defeat the python auto versioning goo that contaminates the build slightly
# with the host's python version rather than the version that's inside the
# port tree we're building.  We do this by adding PYTHON_CMD=/bin/true to the
# make package-name invocation.
PKGNAME_HACK=PYTHON_CMD=/bin/true

# this to go into nanobsd.sh
NANO_PORTS=${NANO_PORTS:-/usr/ports}

clean_packages()
{
	LOCAL_DIR=${NANO_WORLDDIR}/usr/local
	pprint 2 "Clean and create world directory (${LOCAL_DIR})"
	if [ -d "$LOCAL_DIR" ]; then
		rm -Rf ${LOCAL_DIR} >/dev/null 2>&1
		chflags -R noschg ${LOCAL_DIR}/ || :
		rm -rf ${LOCAL_DIR}
	fi
	for f in bin etc lib libdata libexec sbin share; do
		mkdir -p ${LOCAL_DIR}/$f
	done
	find ${LOCAL_DIR}/var/db/pkg/ -mindepth 1 -maxdepth 1 | xargs rm -Rf
}
customize_cmd clean_packages

cust_install_machine_files()
{
	echo "cd ${NANO_CFG_BASE}/Files"
	cd ${NANO_CFG_BASE}/Files
	find . -print | grep -Ev '/(CVS|\.git|\.svn)' | cpio -dumpv ${NANO_WORLDDIR}
}
customize_cmd cust_install_files
customize_cmd cust_install_machine_files 

buildenv()
{
	cd ${NANO_SRC}
	env \
		DESTDIR=${NANO_WORLDDIR} \
		${NANO_PMAKE} \
		buildenv \
		__MAKE_CONF=${NANO_MAKE_CONF_BUILD}
}

NANO_MAKEFS="makefs -B big \
	-o bsize=4096,fsize=512,density=8192,optimization=space"
export NANO_MAKEFS

if [ "$DEBUG" = 1 ]; then
	DEBUG_BUILD="
DEBUG_FLAGS=		-g
"
else
	DEBUG_INSTALL="
INSTALL_NODEBUG=	t
"
fi
# NB: leave c++ enabled so devd can be built
CONF_BUILD="
#WITHOUT_ACPI=true
WITHOUT_ATM=true
WITHOUT_AUDIT=true
WITHOUT_BIND_DNSSEC=true
WITHOUT_BIND_ETC=true
WITHOUT_BIND_LIBS_LWRES=true
WITHOUT_BIND_NAMED=true
WITHOUT_BLUETOOTH=true
WITHOUT_CALENDAR=true
WITHOUT_CTM=true
WITHOUT_CVS=true
WITHOUT_DICT=true
WITHOUT_EXAMPLES=true
WITHOUT_FORTRAN=true
WITHOUT_FREEBSD_UPDATE=yes
WITHOUT_GAMES=true
WITHOUT_GCOV=true
WITHOUT_GPIB=true
WITHOUT_HTML=true
WITHOUT_I4B=true
WITHOUT_IPFILTER=true
WITHOUT_IPX=true
WITHOUT_LIB32=true
WITHOUT_LIBKSE=true
WITHOUT_LOCALES=true
WITHOUT_LPR=true
WITHOUT_MAN=true
WITHOUT_NDIS=true
WITHOUT_NIS=true
WITHOUT_NLS=true
WITHOUT_NS_CACHING=true
WITHOUT_OBJC=true
WITHOUT_PORTSNAP=true
WITHOUT_PPP=true
WITHOUT_PROFILE=true
WITHOUT_RCMDS=true
WITHOUT_SENDMAIL=true
# Knob needs to be fixed on systems that don't have the docs stuff
# preinstalled, e.g. 9.x bsdinstall images.
#WITHOUT_SHAREDOCS=true
WITHOUT_SSP=true
WITHOUT_SYSCONS=true
WITHOUT_SYSINSTALL=true
# Telnet's a useful tool to have on the remote box.
#WITHOUT_TELNET=true
WITHOUT_WIRELESS=true
WITHOUT_WPA_SUPPLICANT_EAPOL=true
PYTHON_DEFAULT_VERSION=python2.7

LOCAL_DIRS=${NANO_LOCAL_DIRS}

${DEBUG_BUILD}
"
CONF_INSTALL="$CONF_BUILD
NOPORTDOCS=t
NO_INSTALL_MANPAGES=t
# devel/apr sucks.
WITH_BDB_VER=46

${DEBUG_INSTALL}
"
# The following would help...
# WITHOUT_TOOLCHAIN=true		can't build ports
# WITHOUT_INSTALLLIB=true		libgcc.a
#
# from the build
# WITHOUT_INFO=true			makeinfo
# WITHOUT_RCS=true
PKG_ONLY_MAKE_CONF="
WITHOUT_TOOLCHAIN=true
WITHOUT_INSTALLLIB=true
WITHOUT_INFO=true
WITHOUT_RCS=true
WITHOUT_SHAREDOCS=true
"

NANO_PACKAGE_ONLY=1

# Ports compiles need to be free of locale tainting.
for v in $(env | egrep '^(LANG|LC).*='); do
	unset ${v%=*}
done

CR()
{
	local newvers revision branch

	newvers="$NANO_SRC/sys/conf/newvers.sh"
	revision=$(grep -m 1 REVISION= $newvers | cut -f2 -d '"')
	branch=$(grep -m 1 BRANCH= $newvers | cut -f2 -d '"')
	# 1. Invoke a subshell so we don't pollute the build environment with
	#    these variables.
	# 2. Use sane defaults to avoid polluting the build environment with
	#    system specific settings that might have been defined via
	#    /etc/make.conf (LOCALBASE), etc.
	mount -t devfs none $NANO_WORLDDIR/dev
	(set -e
	 env
	 export UNAME_m=$NANO_ARCH
	 export UNAME_p=$NANO_ARCH
	 export UNAME_r="$revision-$branch"
	 export UNAME_v="$(uname -v | sed -e "s/$(uname -p)/$UNAME_p/" -e "s/$(uname -r)/$UNAME_r/g")"
	 export OSVERSION=$(awk '/\#define.*__FreeBSD_version/ { print $3 }' "$NANO_SRC/sys/sys/param.h")
	 export PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
	 chroot ${NANO_WORLDDIR} /bin/sh -exc "$*")
	umount $NANO_WORLDDIR/dev
}

# install a package from a pre-built binary
do_add_pkg ()
{
	# Need to create ${NANO_OBJ}/ports in this add_pkg_${port} function
	mkdir -p ${NANO_OBJ}/ports/distfiles
	mkdir -p ${NANO_OBJ}/ports/packages
	mkdir -p ${NANO_WORLDDIR}/usr/ports/packages/All
	mkdir -p ${NANO_WORLDDIR}/usr/ports/distfiles
	mount -t nullfs -o noatime ${NANO_OBJ}/ports/packages \
	    ${NANO_WORLDDIR}/usr/ports/packages
	mount -t nullfs -o noatime ${NANO_OBJ}/ports/distfiles \
	    ${NANO_WORLDDIR}/usr/ports/distfiles
	CR "cd /usr/ports/packages/All;pkg_add -F $1.tbz"
	umount ${NANO_WORLDDIR}/usr/ports/distfiles
	umount ${NANO_WORLDDIR}/usr/ports/packages
	rmdir ${NANO_WORLDDIR}/usr/ports/packages/All
	rmdir ${NANO_WORLDDIR}/usr/ports/packages
	rmdir ${NANO_WORLDDIR}/usr/ports/distfiles
	rmdir ${NANO_WORLDDIR}/usr/ports
}

# Build a port (with the side effect of creating a package)
do_add_port ()
{
	local port_path
	port_path=$1
	shift
	# Need to create ${NANO_OBJ}/ports in this add_port_${port} function
	mkdir -p ${NANO_OBJ}/ports/distfiles
	mkdir -p ${NANO_OBJ}/ports/packages
	mkdir -p ${NANO_PORTS}/packages
	mkdir -p ${NANO_PORTS}/distfiles
	mkdir -p ${NANO_WORLDDIR}/usr/src
	mkdir -p ${NANO_WORLDDIR}/usr/ports
      	mount -t nullfs -o noatime ${NANO_SRC} ${NANO_WORLDDIR}/usr/src
	mount -t nullfs -o noatime ${NANO_PORTS} ${NANO_WORLDDIR}/usr/ports
	mount -t nullfs -o noatime ${NANO_OBJ}/ports/packages \
	    ${NANO_WORLDDIR}/usr/ports/packages
	mount -t nullfs -o noatime ${NANO_OBJ}/ports/distfiles \
	    ${NANO_WORLDDIR}/usr/ports/distfiles
	mkdir -p ${NANO_WORLDDIR}/usr/workdir
	cp /etc/resolv.conf ${NANO_WORLDDIR}/etc/resolv.conf
# Improvement: Don't know why package-recursive don't works here
	CR "env \
	    TARGET=${NANO_ARCH} \
	    TARGET_ARCH=${NANO_ARCH} \
	    make \
	    __MAKE_CONF=${NANO_MAKE_CONF_BUILD} \
	    SRC_BASE=/usr/src \
	    WRKDIRPREFIX=/usr/workdir -C /usr/ports/$port_path \
	    clean package BATCH=yes -DUSE_PACKAGE_DEPENDS \
	    $* clean -DFORCE_PACKAGE -DFORCE_PKG_REGISTER"
	rm ${NANO_WORLDDIR}/etc/resolv.conf
	rm -rf ${NANO_WORLDDIR}/usr/obj
	rm -rf ${NANO_WORLDDIR}/usr/workdir
	umount ${NANO_WORLDDIR}/usr/ports/packages
	umount ${NANO_WORLDDIR}/usr/ports/distfiles
	umount ${NANO_WORLDDIR}/usr/ports
	umount ${NANO_WORLDDIR}/usr/src
}

# Need to check if this function works with cross-compiling architecture!!!!
# Recursive complex function: Generate one function for each ports
add_port ()
{
    local _add_pkg
    local port_path=$1
    local port=`echo $1 | sed -e 's/\//_/'`
    shift
    # Check if package already exist
    # Need to:
    # 1. check ARCH of this package!
    # 2. Add a trap
    cd ${NANO_PORTS}/${port_path}
    # __MAKE_CONF -> ${NANO_MAKE_CONF_BUILD} -- can't plug this in because of a sourcing chicken and egg problem.
    set +e
    PKG_NAME=`make ${PKGNAME_HACK} PORTSDIR=${NANO_PORTS} __MAKE_CONF=${NANO_OBJ}/make.conf.install OPTIONSFILE=/nonexistent package-name $*`
    if [ $? -ne 0 ]; then
        echo "failed to determine the package name for $port_path"
        exit 1
    fi
    set -e

    _add_pkg=false
    if $do_world && $do_clean; then
        # HACK: make do_build.sh -ff work properly instead of having
        # do_add_pkg fall flat on its face when it tries to add the
        # missing package.
        :
    elif [ -f ${NANO_OBJ}/ports/packages/All/${PKG_NAME}.tbz ]; then
	# Pkg file found: Generate add_pkg_NAME function
        _add_pkg=true
    fi

    if $_add_pkg; then
	eval "
	    add_pkg_${port} () {
	        do_add_pkg ${PKG_NAME}
	    }
            customize_cmd add_pkg_${port}
            "
    else
	echo "Package is not yet built: $port"
        eval "
            add_port_${port} () {
	        do_add_port ${port_path} $*
	    }
	    customize_cmd add_port_${port}
	"
	NANO_PACKAGE_ONLY=0
    fi
}

__a=`mount | grep ${NANO_OBJ}/ | awk '{print length($3), $3;}' | sort -rn | awk '{$1=""; print;}'`
if [ -n "$__a" ]; then
	echo "unmounting $__a"
	umount $__a
fi

NANO_BOOTLOADER="boot/boot0"