#+
# Copyright 2010 iXsystems
# All rights reserved
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted providing that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $FreeBSD$
#####################################################################
from os import popen
from django.utils.translation import ugettext_lazy as _
import sqlite3
import freenasUI.settings
SMTPAUTH_CHOICES = (
('plain', _('Plain')),
('ssl', _('SSL')),
('tls', _('TLS')),
)
# GUI protocol choice
PROTOCOL_CHOICES = (
('http', _('HTTP')),
('https', _('HTTPS')),
)
## Disks|Management
TRANSFERMODE_CHOICES = (
('Auto', _('Auto')),
('PIO0', _('PIO0')),
('PIO1', _('PIO1')),
('PIO2', _('PIO2')),
('PIO3', _('PIO3')),
('PIO4', _('PIO4')),
('WDMA0', _('WDMA0')),
('WDMA1', _('WDMA1')),
('WDMA2', _('WDMA2')),
('UDMA16', _('UDMA-16')),
('UDMA33', _('UDMA-33')),
('UDMA66', _('UDMA-66')),
('UDMA100', _('UDMA-100')),
('UDMA133', _('UDMA-133')),
('SATA150', _('SATA 1.5Gbit/s')),
('SATA300', _('SATA 3.0Gbit/s')),
)
HDDSTANDBY_CHOICES = (
('Always On', _('Always On')),
('5', '5'),
('10', '10'),
('20', '20'),
('30', '30'),
('60', '60'),
('120', '120'),
('180', '180'),
('240', '240'),
('300', '300'),
('330', '330'),
)
ADVPOWERMGMT_CHOICES = (
('Disabled', _('Disabled')),
('1', _('Level 1 - Minimum power usage with Standby (spindown)')),
('64', _('Level 64 - Intermediate power usage with Standby')),
('127', _('Level 127 - Intermediate power usage with Standby')),
('128', _('Level 128 - Minimum power usgae without Standby (no spindown)')),
('192', _('Level 192 - Intermediate power usage withot Standby')),
('254', _('Level 254 - Maximum performance, maximum power usage')),
)
ACOUSTICLVL_CHOICES = (
('Disabled', _('Disabled')),
('Minimum', _('Minimum')),
('Medium', _('Medium')),
('Maximum', _('Maximum')),
)
temp = [str(x) for x in xrange(0, 12)]
MINUTES1_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(12, 24)]
MINUTES2_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(24, 36)]
MINUTES3_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(36, 48)]
MINUTES4_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(48, 60)]
MINUTES5_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(0, 12)]
HOURS1_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(12, 24)]
HOURS2_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(1, 13)]
DAYS1_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(13, 25)]
DAYS2_CHOICES = tuple(zip(temp, temp))
temp = [str(x) for x in xrange(25, 32)]
DAYS3_CHOICES = tuple(zip(temp, temp))
MONTHS_CHOICES = (
('1', _('January')),
('2', _('February')),
('3', _('March')),
('4', _('April')),
('5', _('May')),
('6', _('June')),
('7', _('July')),
('8', _('August')),
('9', _('September')),
('a', _('October')),
('b', _('November')),
('c', _('December')),
)
WEEKDAYS_CHOICES = (
('1', _('Monday')),
('2', _('Tuesday')),
('3', _('Wednesday')),
('4', _('Thursday')),
('5', _('Friday')),
('6', _('Saturday')),
('7', _('Sunday')),
)
VolumeType_Choices = (
('UFS', 'UFS'),
('ZFS', 'ZFS'),
)
## Services|CIFS/SMB|Settings
## This will be overrided if LDAP or ActiveDirectory is enabled.
CIFSAUTH_CHOICES = (
('share', _('Anonymous')),
('user', _('Local User')),
)
DOSCHARSET_CHOICES = (
('CP437', 'CP437'),
('CP850', 'CP850'),
('CP852', 'CP852'),
('CP866', 'CP866'),
('CP932', 'CP932'),
('CP1251', 'CP1251'),
('ASCII', 'ASCII'),
)
UNIXCHARSET_CHOICES = (
('UTF-8', 'UTF-8'),
('iso-8859-1', 'iso-8859-1'),
('iso-8859-15', 'iso-8859-15'),
('gb2312', 'gb2312'),
('EUC-JP', 'EUC-JP'),
('ASCII', 'ASCII'),
)
LOGLEVEL_CHOICES = (
('1', _('Minimum')),
('2', _('Normal')),
('3', _('Full')),
('10', _('Debug')),
)
DISKDISCOVERY_CHOICES = (
('default', _('Default')),
('time-machine', _('Time Machine')),
)
CASEFOLDING_CHOICES = (
('none', _('No case folding')),
('lowercaseboth', _('Lowercase names in both directions')),
('uppercaseboth', _('Lowercase names in both directions')),
('lowercaseclient', _('Client sees lowercase, server sees uppercase')),
('uppercaseclient', _('Client sees uppercase, server sees lowercase')),
)
ISCSI_TARGET_EXTENT_TYPE_CHOICES = (
('File', _('File')),
('Device', _('Device')),
('ZFS Volume', _('ZFS Volume')),
)
ISCSI_TARGET_TYPE_CHOICES = (
('Disk', _('Disk')),
('DVD', _('DVD')),
('Tape', _('Tape')),
('Pass-thru Device', _('Pass')),
)
ISCSI_TARGET_FLAGS_CHOICES = (
('rw', _('read-write')),
('ro', _('read-only')),
)
AUTHMETHOD_CHOICES = (
('None', _('None')),
('Auto', _('Auto')),
('CHAP', _('CHAP')),
('CHAP Mutual', _('Mutual CHAP')),
)
AUTHGROUP_CHOICES = (
('None', _('None')),
)
DYNDNSPROVIDER_CHOICES = (
('dyndns@dyndns.org', 'dyndns.org'),
('default@freedns.afraid.org', 'freedns.afraid.org'),
('default@zoneedit.com', 'zoneedit.com'),
('default@no-ip.com', 'no-ip.com'),
('default@easydns.com', 'easydns.com'),
('dyndns@3322.org', '3322.org'),
)
SNMP_CHOICES = (
('mibll', 'Mibll'),
('netgraph', 'Netgraph'),
('hostresources', 'Host resources'),
('UCD-SNMP-MIB ', 'UCD-SNMP-MIB'),
)
UPS_CHOICES = (
('lowbatt', _('UPS reaches low battery')),
('batt', _('UPS goes on battery')),
)
BTENCRYPT_CHOICES = (
('preferred', _('Preferred')),
('tolerated', _('Tolerated')),
('required', _('Required')),
)
PWEncryptionChoices = (
('clear', 'clear'),
('crypt', 'crypt'),
('md5', 'md5'),
('nds', 'nds'),
('racf', 'racf'),
('ad', 'ad'),
('exop', 'exop'),
)
LAGGType = (
('failover', 'Failover'),
('fec', 'FEC'),
('lacp', 'LACP'),
('loadbalance', 'Load Balance'),
('roundrobin', 'Round Robin'),
('none', 'None'),
)
WindowsVersions = (
('windows2000', 'Windows 2000'),
('windows2003', 'Windows Server 2003'),
)
ZFS_AtimeChoices = (
('inherit', _('Inherit')),
('on', _('On')),
('off', _('Off')),
)
ZFS_CompressionChoices = (
('inherit', _('Inherit')),
('off', _('Off')),
('lzjb', _('lzjb (recommended)')),
('gzip', _('gzip (default level, 6)')),
('gzip-1', _('gzip (fastest)')),
('gzip-9', _('gzip (maximum, slow)')),
)
class whoChoices:
"""Populate a list of system user choices"""
def __init__(self):
# This doesn't work right, lol
pipe = popen("pw usershow -a | cut -d: -f1")
self._wholist = pipe.read().strip().split('\n')
self.max_choices = len(self._wholist)
def __iter__(self):
return iter((i, i) for i in self._wholist)
## Network|Interface Management
class NICChoices:
"""Populate a list of NIC choices"""
def __init__(self, nolagg=False, novlan=False, exclude_configured=True):
pipe = popen("/sbin/ifconfig -l")
self._NIClist = pipe.read().strip().split(' ')
# Remove lo0 from choices
if 'lo0' in self._NIClist:
self._NIClist.remove('lo0')
conn = sqlite3.connect(freenasUI.settings.DATABASES['default']['NAME'])
c = conn.cursor()
# Remove interfaces that are parent devices of a lagg
# Database queries are wrapped in try/except as this is run
# before the database is created during syncdb and the queries
# will fail
try:
c.execute("SELECT lagg_physnic FROM network_lagginterfacemembers")
except sqlite3.OperationalError:
pass
else:
for interface in c:
if interface[0] in self._NIClist:
self._NIClist.remove(interface[0])
if nolagg:
# vlan devices are not valid parents of laggs
for nic in self._NIClist:
if nic.startswith('lagg'):
self._NIClist.remove(nic)
for nic in self._NIClist:
if nic.startswith('vlan'):
self._NIClist.remove(nic)
if novlan:
for nic in self._NIClist:
if nic.startswith('vlan'):
self._NIClist.remove(nic)
else:
# This removes devices that are parents of vlans. We don't
# remove these devices if we are adding a vlan since multiple
# vlan devices may share the same parent.
try:
c.execute("SELECT vlan_pint FROM network_vlan")
except sqlite3.OperationalError:
pass
else:
for interface in c:
if interface[0] in self._NIClist:
self._NIClist.remove(interface[0])
if exclude_configured:
try:
# Exclude any configured interfaces
c.execute("SELECT int_interface FROM network_interfaces "
"WHERE int_ipv4address != '' OR int_dhcp != '0' "
"OR int_ipv6auto != '0' OR int_ipv6address != ''")
except sqlite3.OperationalError:
pass
else:
for interface in c:
if interface[0] in self._NIClist:
self._NIClist.remove(interface[0])
self.max_choices = len(self._NIClist)
def remove(self, nic):
return self._NIClist.remove(nic)
def __iter__(self):
return iter((i, i) for i in self._NIClist)
class TimeZoneChoices:
"""Populate timezone from /usr/share/zoneinfo choices"""
def __init__(self):
pipe = popen('find /usr/share/zoneinfo/ -type f -not -name zone.tab')
self._TimeZoneList = pipe.read().strip().split('\n')
self._TimeZoneList = [ x[20:] for x in self._TimeZoneList ]
self._TimeZoneList.sort()
self.max_choices = len(self._TimeZoneList)
def __iter__(self):
return iter((i, i) for i in self._TimeZoneList)
v4NetmaskBitList = (
('1', '/1 (128.0.0.0)'),
('2', '/2 (192.0.0.0)'),
('3', '/3 (224.0.0.0)'),
('4', '/4 (240.0.0.0)'),
('5', '/5 (248.0.0.0)'),
('6', '/6 (252.0.0.0)'),
('7', '/7 (254.0.0.0)'),
('8', '/8 (255.0.0.0)'),
('9', '/9 (255.128.0.0)'),
('10', '/10 (255.192.0.0)'),
('11', '/11 (255.224.0.0)'),
('12', '/12 (255.240.0.0)'),
('13', '/13 (255.248.0.0)'),
('14', '/14 (255.252.0.0)'),
('15', '/15 (255.254.0.0)'),
('16', '/16 (255.255.0.0)'),
('17', '/17 (255.255.128.0)'),
('18', '/18 (255.255.192.0)'),
('19', '/19 (255.255.224.0)'),
('20', '/20 (255.255.240.0)'),
('21', '/21 (255.255.248.0)'),
('22', '/22 (255.255.252.0)'),
('23', '/23 (255.255.254.0)'),
('24', '/24 (255.255.255.0)'),
('25', '/25 (255.255.255.128)'),
('26', '/26 (255.255.255.192)'),
('27', '/27 (255.255.255.224)'),
('28', '/28 (255.255.255.240)'),
('29', '/29 (255.255.255.248)'),
('30', '/30 (255.255.255.252)'),
('31', '/31 (255.255.255.254)'),
('32', '/32 (255.255.255.255)'),
)
v6NetmaskBitList = (
('0', '/0'),
('48', '/48'),
('60', '/60'),
('64', '/64'),
('80', '/80'),
('96', '/96'),
)
RetentionUnit_Choices = (
('hour', _('Hour(s)')),
('day', _('Day(s)')),
('week', _('Week(s)')),
('month', _('Month(s)')),
('year', _('Year(s)')),
)
RepeatUnit_Choices = (
('daily', _('Everyday')),
('weekly', _('Every selected weekday')),
#('monthly', _('Every these days of month')),
#('yearly', _('Every these days of specified months')),
)
