从OpenStack迁移到ZStack，农信互联打造混合云标杆

ZStack深度试用：部署、架构与网络及其与OpenStack的对比

Z-Stack 3.0.x is TI's Zigbee 3.0 compliant protocol suite for the CC2530, CC2531, and CC2538 Wireless MCU. Supports the CC2592 and CC2590 RF front ends which extend up to +22dBm and +14dBm transmit power, respectively, and provide improved receiver sensitivity Z-Stack 3.0 combines multiple previous Zigbee profiles into one unified standard Incorporates the unified Zigbee Cluster Library which is at the foundation of dotdot, the universal language for IoT applications defining data objects, models and functionalities for embedded IoT applications Implements Zigbee Base Device Behavior specification, which defines a common set of mechanisms for network forming, discovering, and application provisioning to be used by all Zigbee devices Based on Zigbee PRO 2015 stack, it provides new and improved security modes, including Install Codes for out-of-band key exchange, and Distributed Security Networks for Coordinator-less network topology Supports Green Power Proxy, allowing energy-harvesting and ultra-low power devices to connect seamlessly to a Zigbee network Forwards and backwards compatibility with previous Zigbee PRO and application profiles is maintained Sample Applications included for quick prototyping, including door lock, thermostat, light and switch, and temperature sensor Zigbee Network Processor firmware, providing an abstracted access to the Zigbee Pro 2015 stack and Base Device Behavior functionality via a serial port for two-chip architectures Zigbee-based applications Over-the-air firmware upgrade and serial bootloader capability, allowing for future updates of deployed systems Compatible with TI's Z-Stack Linux Gateway, a reference implementation of an Ethernet-to-Zigbee gateway using a Linux-based platform as host processor, that makes it easy to integrate applications on top of an IP-based interface which abstracts Zigbee protocol functionality to the users.

zigbee协议 ZStack-CC2530-2.3.0-1.4.0 完整文档，多个PDF。