uvc驱动记录

最新推荐文章于 2025-05-10 11:20:27 发布

原创

最新推荐文章于 2025-05-10 11:20:27 发布 · 736 阅读

0 ·

CC 4.0 BY-SA版权

本文主要探讨了Linux系统下UVC（USB Video Class）驱动的工作原理，详细解析了ioctl调用流程，涉及uvc_driver.c、uvc_v4l2.c和uvc_ctrl.c等关键文件。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

Linux uvc驱动分析

一、ioctl调用流程

1.common/drivers/media/video/uvc/uvc_driver.c

module_init(uvc_init);

static int __init uvc_init(void){
  result = usb_register(&uvc_driver.driver);
}

struct uvc_driver uvc_driver = {
	.driver = {
		.name		= "uvcvideo",
		.probe		= uvc_probe,
		.disconnect	= uvc_disconnect,
		.suspend	= uvc_suspend,
		.resume		= uvc_resume,
		.reset_resume	= uvc_reset_resume,
		.id_table	= uvc_ids,
		.supports_autosuspend = 1,
	},
};

static int uvc_probe(struct usb_interface *intf, const struct usb_device_id *id){
  uvc_register_chains(dev)
}

static int uvc_register_chains(struct uvc_device *dev){
  ret = uvc_register_terms(dev, chain);
}

static int uvc_register_terms(struct uvc_device *dev, struct uvc_video_chain *chain){
  ret = uvc_register_video(dev, stream);
}

static int uvc_register_video(struct uvc_device *dev,struct uvc_streaming *

最低0.47元/天解锁文章