Skip to main content
Version: Firmware AT2 v2.6

AT2 Payload Decoder

Paste a raw hexadecimal payload received from an AT2 tracker and decode it instantly in your browser. No setup required — the decoder runs entirely client-side using the official AT2 codec. See the AT2 driver documentation for the full payload structure reference.

How to use​

  1. Pick an Example payload to see a real AT2 message decoded instantly, or:
  2. Select Uplink (device → server) or Downlink (server → device).
  3. Paste the hexadecimal payload string in the text area.
  4. Optionally fill in fPort and Receive time to improve decode accuracy.
  5. Click Decode to see the structured JSON output.
tip

Where to find the hex payload?

Most LoRaWAN network servers (Actility ThingPark, The Things Network, Helium, etc.) expose the raw payload as a hexadecimal string in the uplink event, typically under a field named payload_hex, frm_payload, or data.

The Example payload dropdown is populated from the same fixtures the AT2 codec is tested against, so every entry is guaranteed to decode successfully.

note

Codec version

The decoder always uses the latest published version of the AT2 codec from the abeeway-codec GitHub repository. No action is needed when a new codec version is released — the page picks it up automatically.